• Journal of the Korean Wood Science and Technology
• /
• v.25 no.3
• /
• pp.58-65
• /
• 1997

This research was carried out to evaluate the effect of process variables on mechanical properties of the wood fiber-thermoplastic fiber composites by turbulent air mixing method. The turbulent air mixer used in this experiment was specially designed in order to mix wood fiber and thermoplastic polypropylene or nylon 6 fiber, and was highly efficient in the mixing of relatively short plastic fiber and wood fiber in a short time without any trouble. The adequate hot - pressing temperature and time in our experimental condition were $190^{\circ}C$ and 9 minutes in 90% wood fiber - 10% polypropylene fiber composite and $220^{\circ}C$ and 9 minutes in 90% wood fiber 10% nylon 6 fiber composite. Both in the wood fiber - polypropylene fiber composite and wood fiber- nylon 6 fiber composite, the mechanical properties improved with the increase of density. Statistically, the density of composite appeared to function as the most significant factor in mechanical properties. Within the 5~15% composition ratios of polypropylene or nylon 6 fiber to wood fiber, the composition ratio showed no significant effect on the mechanical properties. Bending and tensile strength of composite, however, slightly increased with the increase of synthetic fiber content. The increase of mat moisture content showed no significant improvement of mechanical properties both in wood fiber - polypropylene fiber composite and wood fiber nylon 6 fiber composite. Wood fiber - nylon 6 fiber composite was superior in th mechanical strength to wood fiber-polypropylene fiber composite, which may be related to higher melt flow index of nylon 6 fiber(22g/10min) than of polypropylene fiber(4.3g/10min).

• Korea Journal of Hospital Management
• /
• v.26 no.3
• /
• pp.28-42
• /
• 2021

Purposes: The objective of this study is to analyze service design process of dental clinic preventive service by using 'Double Diamond Design Process' which is user-centered for improving dental clinic management efficiency. Methodology: We examine case study that dental clinic preventive service of local dental clinic. Following the double diamond design four steps(①discover, ②define, ③develop, ④deliver), we use suitable analytic tools in each steps. In discover step, we perform observation and desk research. Next, in define step, affinity diagram, user persona, and user journey map are performed. We then make service blueprint in develop step. Finally, in deliver step, virtual scenario and confirm some outputs which are based on results of former steps are suggested. Findings: As a result of this study, waiting and consulting phases turn out that these phases are in the most trouble than others. Users(patients) have lots of complain and dissatisfaction in these phases. These touch-points will have to be modified Practical Implication: After checking this study result, it could suggest improvement schemes. To apply these, we try to make some scenarios, and finally realize some outputs. Service design has arisen to strengthen the competitiveness by reflecting user's experience and needs. Especially, service design is not typical, it is so flexible that can apply to various situation and objects. We hope that result of this study is made good use for dental clinics in need.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.24 no.3
• /
• pp.323-329
• /
• 2014

In spoken language research, transcription process needs to be carried out to translate voice data into text. Transcription tool, support program of transcription, offers various information such as content and time of utterance and speaker information. For this reason, inexperienced computer users are having trouble familiarizing with the program. Moreover, since there are little transcription tools developed domestically in Korea, they are usually not suitable for Korean environment. In this paper, we propose a transcription tool which supports not only Korean transcription but easy-to-use interface environment for novice. The transcription supporting function is also provided to minimize mistake that might happen in the process of transcription. And a system structure will be provided for data reliability. Usability of the proposed tool is evaluated in accordance with transcription experience. The evaluation result shows that transcription process and transcription support function have become faster and more convenient respectively.

• Applied Science and Convergence Technology
• /
• v.23 no.6
• /
• pp.309-316
• /
• 2014

A large particle accelerator requires an ultrahigh vacuum (UHV) system of average pressure under $1{\times}10^{-7}$ Pa for mitigating the impact of beam scattering from the residual gas molecules. The surface inside the beam ducts should be controlled with an extremely low thermal outgassing rate under $1{\times}10^{-9}Pa{\cdot}m^3/(s{\cdot}m^2)$ for the sake of the insufficient pumping speed. To fulfil the requirements, the aluminum alloys were adopted as the materials of the beam ducts for large accelerator that thanks to the good features of higher thermal conductivity, non-radioactivity, non-magnetism, precise machining capability, et al. To put the aluminum into the large accelerator vacuum systems, several key technologies have been developed will be introduced. The concepts contain the precise computer numerical control (CNC) machining process for the large aluminum ducts and parts in pure alcohol and in an oil-free environment, surface cleaning with ozonized water, stringent welding process control manually or automatically to form a large sector of aluminum ducts, ex-situ baking process to reach UHV and sealed for transportation and installation, UHV pumping with the sputtering ion pumps and the non-evaporable getters (NEG), et al. The developed UHV technologies have been applied to the 3 GeV Taiwan Photon Source (TPS) and revealed good results as the expectation. The problems of leakage encountered during the assembling were most associated with the vacuum baking which result in the consequent trouble shootings and more times of baking. Then the installation of the well-sealed UHV systems is recommended.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.8
• /
• pp.5695-5706
• /
• 2015

Recently adoption of BIM technology for building renovation and remodeling has been increased in construction industry. However most buildings have trouble in 2D drawing-based BIM modeling, because 2D drawings have not been updated real situations continually. Applying reverse engineering, this study analysed the point cloud data structure and the process for guideline of reverse engineering of architectural MEP, and deducted the relating considerations. To active usage of 3D scanning technique in domestic, the objective of this study is to analyze the point cloud data processing from real site with terrestrial LiDAR and the process from data gathering to data acquisition.

• The KIPS Transactions:PartD
• /
• v.11D no.2
• /
• pp.479-484
• /
• 2004

Recently, cosmetic shop market, which is made up of company, agent, and market shop, has got into trouble caused by economic crisis and the coming of new distribution systems such as internet shopping mall. To overcome the problems, in this paper, we propose a cosmetic distribution portal system, which we call COSPO. COSPO is a portal system that has three functions. The first is automation of the business process for product distribution between the company, agent, and market shops. The second is communication between them. The final is sharing information generated through the automated process. In this paper, we build a prototype that support distribution channel of a company. Then, ultimately it should be extended to cover the distribution network of all companies. COSPO will contribute to the modernization of the cosmetic market industry in the country as well as to the increase of the profits.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.1937-1941
• /
• 2007

During a process of a nanoimprint for manufacturing LCD, a small temperature variation on the LCD glass can cause thermal stress and generate unexpected displacement. To avoid this trouble, a precision temperature control unit using thermoelectric modules is appropriate for nanoimprint processes. The unit consists of an air control system, a cooling water control system, and a power control system. The air control system includes a thermoelectric module, thermocouples measuring temperatures of air and a duct-stale fin, and two air fans. The heat generated by the thermoelectric module is absorbed by the cooling water control system. The power control system catches the temperature of the thermoelectric module, and a PID controller with SCR controls the input power of the thermoelectric module. Temperature control performance is evaluated by experiment and simulation. The temperature control unit is able to control the exit temperature about ${\pm}2^{\circ}C$ from the incoming fluid temperature, and the error range is ${\pm}0.1^{\circ}C$. However, the control time is approximately 30minute, which needs further study of active control

• Journal of The Korean Association of Information Education
• /
• v.9 no.1
• /
• pp.49-55
• /
• 2005

Web-Based instruction system embodied according to traditional process until present. But, these method have inefficiency in system development and give trouble of operation and administration after development. Therefore, It need induction of component based development in Web-Based instruction system. In this research, I constructed score processing system by component composition. I embodied component by Java Beans and used C2 architecture at the composition method. In this result, I shown in application possibility of component based development in Web-Based instruction system as to construct whole score processing system through composition of each component.

• Design & Manufacturing
• /
• v.6 no.1
• /
• pp.67-72
• /
• 2012

Most of the plastics products have been manufactured by injection molding. Molding trouble in injection-molded parts is caused by changing a molding product and molding process condition, etc. In this study, warpage in the injection molded part have been studied. Specimens are rectangular flat shape with and without ribs. Non-crystalline resins (ABS+GF30%, PC+GF30%) and crystalline resins (PP+GF30%, PA66+GF30%) were used for material. Flat shape ribs showed higher warpage than flat shape without rib by 10 to 41%. the specimens with ribs that are located parallel to flow direction has higher warpage than the specimens with rib that are located perpendicular to flow direction by 11 to 50%. crystalline resins have higher warpage than non-crystalline resins by 22 to 78%. Warpage decreases as packing time increases as injection temperature increases.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.10a
• /
• pp.632-637
• /
• 1993

Rating systems of bevel gears(straight, spiral, and zerol bevel gears) which are commonly used as power transmission devices for non-parallel axes are developed on the personal computer, which analyze and/or evaluate the gear design and the service performance at the point of view of strength and durability. The typical considerations of the ratings are the bending strength the surface durability, and the scoring resistance. The ratings are carried out using the reliable standards of AGMA & Gleason Works. Therefore, the system is built so that the variables or factors considered differently in those standards and the strength, durability, and scoring partially in Gleason are appraised separatedly by each method, and a series of the estimation processes is integrated into the system so as to compare each result. The developed rating system can be used in the initial stage of gear design process, and also a better design can be performed by the evaluation of the initial design at the view point of gear strength and durability. Additionally, it is useful for the trouble-shooting of bevel gear systems and to the purpose of introducing the methods for maintaining design strength in service with appraising the gear strength after design or with appraising the influencing factors, as a whole. Therefore, this rating systems can help the aim of design automation of bevel gears.