• Korean Chemical Engineering Research
• /
• v.59 no.3
• /
• pp.305-315
• /
• 2021

An intermeshing corotating twin screw extruder is mainly used for compounding polymeric materials. Twin screw extruder can adopt modular-type screw configurations, which directly controls the quality and productivity of the products. The types, shapes, and specifications of the screw and kneading elements are summarized, and the effects of screw configuration on the processabiliy of the materials are discussed. The principles of screw configuration universally applied to mass production of general-purpose resins are explained, and the guidelines of screw combination according to the roles of feeding, melt mixing, and metering zones are listed. The strategies of screw combination suitable for various cases, such as side feeding of liquid additives or inorganic fillers, reactive extrusion, devolatilization process, production of products requiring bright color and transparency, and processing of materials with low apparent specific gravity, are presented.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.6_2
• /
• pp.1119-1125
• /
• 2022

The depletion of resources and waste disposal caused by the continuous development of industry have emphasized the need to reduce consumption and production, recycle and reuse, and the importance of remanufacturing has increased in recent years. The spindle part of the aging planner miller, which is currently being remanufactured, is one of the factors that has the greatest impact on the performance of the machine tool. When designing the spindle part of the spindle shaft, there are considerations such as the configuration size bearing performance of the main shaft, but the diameter of the main shaft, the dangerous speed bearing, and the arrangement that affect the machining accuracy should be basically considered. As such, various studies have been conducted on the design of machine tool spindle spindles, but research on the reverse engineering of existing aging machine tool spindle spindles is poor. Reverse engineering is designing in the direction of improving performance by extracting specifications from already finished products, and first scanning the reverse engineered object through a 3D scanner, 3D modeling is performed based on the collected data, and then the process of deriving improvement plans by reverberating to improve performance by identifying wear and damage conditions is followed. Therefore, in this study, the purpose of this study is to provide data on reverse engineering by deriving improvement plans through optimal design for the bearing position of the aging planar Miller spindle spindle using central composite programming.

• Progress in Superconductivity and Cryogenics
• /
• v.12 no.4
• /
• pp.24-30
• /
• 2010

The renewable energy source is considered as a good measure to cope with the global warming problem and the fossil energy exhaustion. The construction of electric power plant such as an offshore wind farm is rapidly increasing and this trend is expected to be continued during this century. The bulky and long distance power transmission media is essential to support and promote the sustainable expansion of renewable energy source. DC power cable is generally considered as the best solution and the demand for DC electric power has been rapidly increasing. Especially, the high temperature superconducting (HTS) DC cable system begins to make a mark because of its advantages of huge power transmission capacity, low transmission loss and other environmental friendly aspects. Technical contents of DC HTS cable system are very similar to those of AC HTS cable system. However the DC HTS cable can be operated near its critical current if the heat generation is insignificant, while the operating current of AC HTS cable is generally selected at about 50~70% of the critical current because of AC loss. We chose the specifications of the cable core of 'Tres Amigas' project as an example for our study and investigated the heat generation when the DC HTS cable operated near the critical current by some electric and thermal analyses. In this paper, we listed some technical issues on the design of the DC HTS cable core and described the process of the cable core design. And the results of examination on the current capacity, heat generation, harmonic loss and current distribution properties of the DC HTS cable are introduced.

• The Korean Journal of Archival Studies
• /
• no.76
• /
• pp.119-157
• /
• 2023

This study attempted to propose a faceted search function to supplement metadata for existing presidential gifts. To this end, based on 3,574 presidential gifts provided online by the Presidential Archives, identified the characteristics of records extracted from the gift name, gift giver, gift country, gift date, and receipt process, specifications, and characteristics of the presidential gift. Based on this, study designed a facet-based classification of presidential gifts with 5 basic facets and 51 sub-facets and structured facets define each facet element and assign an arrangement order and symbol. This classification system can be expected to be utilized as a basis for building faceted navigation by applying it to a search system. Through the study, it was confirmed that it was necessary to develop a new classification system for presidential gifts, and it was proposed to apply facet classification as an alternative classification system for this purpose.

• Journal of the Korea Institute of Construction Safety
• /
• v.5 no.1
• /
• pp.9-16
• /
• 2023

Gang-foam is used in many construction projects because it is not only precise in terms of vertical, horizontal, and specifications, but also easy to install and dismantle. However, major accidents occur every year due to non-compliance with safety rules and work order, also manuals and checklists currently in use are insufficient. Thirty-seven surveys was conducted by analyzing major accident cases of domestic gang-form construction project and deriving 20 risk factors and 43 check points. Based on the survey, the importance and appropriateness of check points were evaluated. As a result of this study, a checklist was presented, check points were placed in the order of importance based on assembly, installation, dismantling, and lifting of the Gang-form process. The checklist was organized so that workers could comply with safety rules and work order. Through this, it is expected to prevent major accidents and contribute to efficient safety management.

• Korean Journal of Agricultural Science
• /
• v.48 no.4
• /
• pp.1027-1037
• /
• 2021

This study aims to evaluate the performance of an electric multi-purpose cultivator through a simulation analysis. The simulation model was developed using commercial software, Simulation X, by applying the specifications of certain parts, such as an electric motor, a battery, and so on. The input parameter of the simulation was the engine load data according to the rotary tillage level using a conventional multi-purpose cultivator. The data were collected by configuring a load measurement system, and the load cycle was developed by repeating the data collection process under the most severe conditions. The average output engine torque values of conventional multi-purpose cultivator were 10.7, 13.0, 9.4, and 11.2 Nm in the D1P1, D1P2, D2P1, and D2P2 conditions, respectively. As a result of the simulation, the maximum values of the motor torque, rotational speed, and power of the electric multi-purpose cultivator were 16.8 Nm, 2,033.3 rpm, and 3.3 kW, respectively, and the motor was driven in sections within 70, 68, and 45% of the maximum output range. The rate of decrease of the battery state of charge (SOC) level per minute was approximately 0.6%, and it was possible to supply electric power to the motor for 9,550 sec. In the future study, research to verify and improve simulation models of electric multi-purpose cultivators should be conducted.

• Composites Research
• /
• v.36 no.5
• /
• pp.361-368
• /
• 2023

Composite materials used in aircraft must be certified using approved materials to ensure the the airworthiness of the aircraft. Certification is carried out by verifying the physical properties and processes of the materials, and producing material and process specifications. The composite material certification system in ROK(Republic of Korea) has been established through the MOLIT(Ministry of Land, Infrastructure and Transport) pilot certification project for aircraft composite materials. Currently, the KIAST(Korea Institute of Aviation Safety Technology) operates and manages the certification and shared data system. This study identifies realm for improvement in the established certification system for aircraft composite materials based on empirical evidence and aims to propose measures for the certification and industrial promotion of domestically produced aircraft composite materials.

• The Journal of the Acoustical Society of Korea
• /
• v.43 no.3
• /
• pp.344-350
• /
• 2024

A Reference Sound Source (RSS) is an important standard device employed in measuring sound power. The specifications of RSS is specified in international standards, and it is classified as a major calibration item in the field of acoustic metrology. Since the output power of RSS is affected by the supply voltage, each country needs to secure its own calibration service system. In this study, a procedure for calibrating a RSS is established based on the reverberant room conditions and uncertainty evaluation is conducted. Basically, the calibration procedure can apply a precision measurement process of acoustic power, and here, the measurement method using the reverberation chamber of ISO 3741 is applied. For this purpose, a measurement system is constructed, measurements are conducted with two types of RSS, and measurement uncertainty is evaluated. Through measurement examples, it is confirmed that the non-uniformity of the sound pressure distribution in the reverberation room and the volume measurement uncertainty contributed significantly to the overall uncertainty. Additionally, the influence of input voltage is experimentally examined to examine the uncertainty contribution that can be reflected in acoustic power measurements.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.5
• /
• pp.551-560
• /
• 2014

Compare to other industrial sites, the civil construction work not only takes longer time but also has made of complicated processes, such as the integrated management, process control, and quality control until the completion. However, it is hard to take control the construction sites, since numerous issues are always emerged. The study purposes on providing the dataset to synthetically manage and monitor the civil construction site, main design, drawings, process, construction cost, and others at real-time by using the low altitude close-range aerial images, based on UAV, and the GPS surveying method for treating the three-dimensional spatial information quickly and accurately. As a result, we could provide the latest information for the quick decision-making following from planning to completion of the construction, and objective site evaluation by the high-resolution three-dimensional spatial information and drawings. Also, the present map, longitudinal map, and cross sectional view are developed to provide various datasets rapidly, such as earthwork volume table, specifications, and transition of ground level.

• Culinary science and hospitality research
• /
• v.22 no.8
• /
• pp.219-225
• /
• 2016

This study was conducted to investigate the amount of fat, vitamins and minerals in milk can be affected by hydrodynamic cavitation since cavitation is recently focused on as one of the sterilization methods. Vitamins (vitamin A, $B_2$), minerals (Ca, P, Mg, Zn) and fat contents were measured according to Ministry of Food and Drug Safety's Processing Standards and Component Specifications of Animal Product. Vitamin A & $B_2$ contents decreased approximately 23% & 19%, respectively after cavitation. Minerals content showed no change after cavitation. Also, P and Mg contents were reduced after cavitation to 2 mg/100g and 0.1 mg/100g, showing no change. Milk fat content was 3.46% before cavitation and 3.41% after cavitation, displaying no difference. Hydrodynamic cavitation process displays a possibility to replace existing pasteurizing method, as it does not change vitamin or mineral contents in milk. Therefore, a more clear and systematic research on hydrodynamic cavitation pasteurization is needed to distribute excellent quality milk and to emphasize physiochemical properties and quality change of existing heat pasteurization process.