• The KIPS Transactions:PartC
• /
• v.14C no.2
• /
• pp.191-198
• /
• 2007

A mobile ad-hoc network (MANET) is an autonomous, infrastructure-less system that consists of mobile nodes. In MANET, on demand routing protocols are usually used because network topology changes frequently. AODV, which is a representative on demand routing protocol, operates using the routing table of each node that includes next hop of a route for forwarding packets. It maintains the established route if there is not an expiration of route or any link break. In the paper, we propose a partially adaptive route maintenance scheme (AODV-PA) based on AODV, which provides dynamic route modification of initial route for selecting the effective route using not only next hop but also next-hop of next-hop (i.e. 2-hop next node) acquired through route discovery process. In addition, the proposed scheme additionally manages the routing table for preventing exceptional link breaks by route modification using HELLO messages. We use NS 2 for the computer simulation and validate that the proposed scheme is better than general AODV in terms of packet delivery ratio, latency, routing overhead.

• Journal of Multimedia Information System
• /
• v.1 no.2
• /
• pp.101-110
• /
• 2014

The purpose of this research is to extend Ad-hoc network system lifetime with the proposed routing protocol which has considered hop lifetimes of the nodes while guaranteeing QoS in the establishment process of Ad-hoc network communication paths. Based on another power aware routing system that proposed in the advanced research [1], we are proposing an alternative power aware routing system in which nodes' hop lifetimes are compared in order to extend the lifetime of an Ad-hoc network system and delay factors have been considered for the assurance of QoS. The research of the routing protocol in this paper, which aims to maximize the system survival time considering power consumption status during the path searching in MANET and pursues the mechanism that controls hop delays for the same reason, can be applied to the study of WSN. The study concerning such phenomena is essential so that the proposed protocol has been simulated and verified with NS-2 in Linux system focusing on the lifetimes of the hops of the nodes. Commercialization of smart devices and arrival of the ubiquitous age has brought about the world where all the people and things are connected with networks. Since the proposed power aware method and the hop delay control mechanism used to find the adequate communication paths in MANET which mainly uses batteries or in WSN, they can largely contribute to the lifetime extension of the network system by reducing power consumptions when utilized for the communications attempts among soldiers during military operation, disaster areas, temporary events or exhibitions, mobile phone shadow areas, home networks, in-between vehicle communications and sense networks, etc. This paper presents the definitions and some advantages regarding the proposed outing protocol that sustain and extend the lifetime of the networks.

• The KIPS Transactions:PartC
• /
• v.14C no.1 s.111
• /
• pp.87-94
• /
• 2007

In mobile ad hoc networks the most popular on demand routing protocols are the Dynamic Source Routing (DSR) protocol and the Ad hoc On demand Distance Vector (AODV) routing protocol. These and other representative standard routing protocols are designed to find and maintain only a single path. Whenever there is a link break on the active route, source node has to invoke a route discovery process from the beginning and it causes a lot of overhead. Multipath routing protocols, which can alleviate these problems by establishing multiple alternative paths between a source and a destination, are widely studied. In this paper we propose a node disjoint multipath discovery technique based on AODV local route discovery. This technique can find and build completely separated node disjoint multi paths from a source to a destination as many as possible. It will make routing more robust and stable.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.3B
• /
• pp.224-236
• /
• 2003

MANET(Mobile Ad hoc networks) is a mobile, multi-hop, and wireless network which is bandwidth constrained, energy constrained, resource constrained, autonomous, and self operating systems with dynamic topology. These constraints make the routing between communicating nodes in ad hoc networks difficult. In this paper we survey several routing protocol for mobile ad hoc networks. Especially, we focus on Zone Routing Protocol, hybrid routing framework suitable for a wide of mobile ad hoc networks and analyze performance of ZRP. In the case of ZRP protocol, it is essential that the use of optimal zone radius for efficient use. Otherwise it was proved through an simulation that performance of whole network is rapidly decrease with greatly increasing overhead of ZRP traffic that need for transmission of packet by IARP or IERP traffic. Also we suggest the process of finding QoS path that use in-band signal for QoS routing in ad hoc network. This method guarantees route that make real time multimedia service for QoS enabled path.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.517-520
• /
• 2009

Healthcare application system has been actively researched to apply WSN technology to healthcare area with a mobile sensor node of low cost, low power, and small size. Sensor node has the problem for transmission range of RF power and time delay of the wireless routing connectivity between sensor nodes. In this paper, we proposes a new method utilizing mobile sensor nodes with relay sensor nodes for quick network routing changing using query technique in healthcare system. A query processor to control and manage the routing changing of sensor nodes in a wireless sensor network was designed and implemented. The user's PC transmits the beacon message which will change the quick link routing according to activity status of patient in wireless sensor network. We describe the implementation for query protocol that is very effective of power saving between sensor nodes.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2003.09a
• /
• pp.213-215
• /
• 2003

Multimedia has to carry data of heterogeous types. Multicast communication techniques can supply the most appropriate infrastructures to such multimedia. Of many multicast protocols, the core based tree (CBT) protocol is the most concentrative studies are conducted on. The CBT places a core router at center of the shared tree and transfers data through the tore router. However, the CBT has two problems due to centralizing all network traffics into a core router. First it can raise bottleneck effect at a core router. Second, it is possible to make an additive processing overhead when core router is distant from receivers. To cope with the problems, this paper proposes an intelligent anycast routing protocol. The anycast routing attempts to distribute the centralized traffic into plural core routers by using a knowledge-based algorithm. The anycast routing estimates the traffic characteristics of multimedia data far each multicast source, and achieves effectively the distributing that places an appropriate core router to process the incoming traffic based on the traffic information in the event that request of receivers are raised. This method prevent the additional overhead to distribute traffic because an individual core router uses the information estimated to multicast sources connected to oneself and the traffic processing statistics shared with other core neuters.

• Management Science and Financial Engineering
• /
• v.10 no.2
• /
• pp.1-28
• /
• 2004

The integrated supply chain of business partners for e-Commerce in cyber space is defined as Logistics Chain if the cooperative activities are logistics-related. Logistics Chain could be managed effectively and efficiently by cooperative technologies of logistics chain execution. In this paper, we propose a routing and scheduling algorithm based on the Tabu search by adding geographical information into existing constraint for pick-up and delivery process to minimize service time and cost in logistics chain. And, we also consider an uncertainty processing for the tracing of moving object to control pick-up and delivery vehicles based on GPS/GIS/ITS. Uncertainty processing is required to minimize amount of telecommunication and database on vehicles tracing. Finally, we describe the Logistics Chain Execution (LCE) system to perform plan and control activities for postal logistics chain. To evaluate practical effects of the routing and scheduling system, we perform a pretest for the performance of the tabu search algorithm. And then we compare our result with the result of the pick-up and delivery routing plan generated manually by postmen.

• ETRI Journal
• /
• v.27 no.6
• /
• pp.733-746
• /
• 2005

In the context of multi-protocol label switching (MPLS) traffic engineering, this paper proposes a scalable constraintbased shortest path first (CSPF) routing algorithm with multiple QoS metrics. This algorithm, called the multiple constraint-based shortest path first (M_CSPF) algorithm, provides an optimal route for setting up a label switched path (LSP) that meets bandwidth and end-to-end delay constraints. In order to maximize the LSP accommodation probability, we propose a link weight computation algorithm to assign the link weight while taking into account the future traffic load and link interference and adopting the concept of a critical link from the minimum interference routing algorithm. In addition, we propose a bounded order assignment algorithm (BOAA) that assigns the appropriate order to the node and link, taking into account the delay constraint and hop count. In particular, BOAA is designed to achieve fast LSP route computation by pruning any portion of the network topology that exceeds the end-to-end delay constraint in the process of traversing the network topology. To clarify the M_CSPF and the existing CSPF routing algorithms, this paper evaluates them from the perspectives of network resource utilization efficiency, end-to-end quality, LSP rejection probability, and LSP route computation performance under various network topologies and conditions.

• Journal of Information Processing Systems
• /
• v.19 no.1
• /
• pp.17-32
• /
• 2023

Centralized hierarchical routing protocols are often used to solve the problems of uneven energy consumption and short network life in wireless sensor networks (WSNs). Clustering and cluster head election have become the focuses of WSNs. In this paper, an energy balanced clustering routing algorithm optimized by sine cosine algorithm (SCA) is proposed. Firstly, optimal cluster head number per round is determined according to surviving node, and the candidate cluster head set is formed by selecting high-energy node. Secondly, a random population with a certain scale is constructed to represent a group of cluster head selection scheme, and fitness function is designed according to inter-cluster distance. Thirdly, the SCA algorithm is improved by using monotone decreasing convex function, and then a certain number of iterations are carried out to select a group of individuals with the minimum fitness function value. From simulation experiments, the process from the first death node to 80% only needs about 30 rounds. This improved algorithm balances the energy consumption among nodes and avoids premature death of some nodes. And it greatly improves the energy utilization and extends the effective life of the whole network.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.7
• /
• pp.97-103
• /
• 2009

This paper proposes efficient routing scheme named MP-DD(MultiPath-Direct Diffusion) which is simple enough to be applicable to the wireless sensor networks. Conventional DD uses only one optimal path, therefore it consumes more energy of specific nodes. MP-DD uses multiple path and has a information of hop upstream node in the direction of the base-station is determined which are obtainable via the process of self-organization of the network. Simulation results show the feasibility of the simple routing schemes for the sensor networks.