• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.11
• /
• pp.928-934
• /
• 2002

A natural way to cope with fault tolerant control (FTC) problems is to modify the control parameters according to an online identification of the system parameters when a fault occurs. However. due to not only difficulties Inherent to the online multivariable identification in closed-loop systems, such as modeling errors, noise or the lack of excitation signals, but also long time requirement to identify the post-fault system and implemeutation of control problems during the identification process, we propose an alternative approach based on the observer-based fault detection and isolation (FDI) and model reference adaptive control (MRAC). The proposed robust fault diagnosis method is based on a bank of observers. We also propose a model reference adaptive control with changeable reference models according to the occurred faults. Simulation results of a flight control example show the validity and applicability of the proposed algorithms.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.305-310
• /
• 2008

A lot of changes are required in a management method of a project because the character of construction projects gets bigger and higher gradually. Especially, for the efficiency of the management method the plans of various viewpoints focused on the construction supply chain field that the technical application of Ubiquitous Technologies such as RFID/USN is being advanced actively are presented. Recently, the introduction of the intelligent equipment which is developed for intelligence of construction site requires the new process model in the construction supply chain management on the construction site. Therefore, this study is to propose the intelligent construction supply chain reference model development in order to provide the guide that the numerous materials for construction could easily be applied in the changed process, as mentioned above, by overcoming the limit of the existing construction supply chain process which is proposed as bar codes and RFID/USN based individual material types and reflecting the change factors like the intelligent equipment of construction supply chain management.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.12
• /
• pp.73-82
• /
• 2020

Most process date such as semiconductor and petrochemical processes, autocorrelation often exists between observed data, but when the existing SPC(Statistical process control) is applied to these processes, it is not possible to effectively detect the average change of the process. In this paper, when the average change of a certain size occurs in the process data following a specific time series model, the average of the residuals changes according to the passage of time, and the change pattern of the average is introduced around the ARMA(1,1) process. Based on this result, the reference value required in the design process of the CUSUM (Cumulative sum) control chart is appropriately considered by considering the type of the time series model of the process data of the CUSUM control chart that can detect small mean changes in the process and the width of the process mean change of interest. It was confirmed through simulation that it should be selected and used.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10a
• /
• pp.289-294
• /
• 1988

This paper describes tbe design and implementation of the adaptive controller to maintain the glood weld quality in gas metal arc welding process. The weld torch travel speed and the surface temperature are taken, respectively, as an input and an output of the welding control system. Because of the very complex phenomena of the process, the input-output dynamic model was experimentally identified by AIC (Akiake Information Criterion). Based on the model structure, the explicit model reference adaptive controller is simulated in order to regulate the output tempernture to the desired level.

• The KIPS Transactions:PartD
• /
• v.9D no.5
• /
• pp.887-896
• /
• 2002

Based on SPICE (Software Process Improvement and Capability dEtermination) evaluation model, SPIRE (Software Process Improvement in Regions of Europe) is developed and published as a process improvement model for small and medium size organizations. However, practical selection guidelines or mapping rules between business goals and software processes do not exist within SPIRE. This research aims to construct an objective reference mapping table between business goals and software processes, and to propose a process selection method using the mapping table. The mapping table is constructed by the convergence of domestic software process experts' opinions using Delphi techniques. In the suggested process selection method, target processes are selected using the intuition of project participants or project managers as well as the reference mapping table. The feasibility of the proposed selection method has been reviewed by applying to two small software companies. Using the reference mapping table, we could select key processes which were passed over by project managers.

• Korean Journal of Computational Design and Engineering
• /
• v.22 no.2
• /
• pp.150-161
• /
• 2017

Effective data exchange among the diverse stakeholders participating in a process plant project is an important issue. ISO 15926 is an international standard to support sharing and integrating of process plant data. iRINGTools is an ISO 15926-based tool used to exchange plant data. To exchange plant data using iRINGTools, the mapping between the data model of a commercial system and ISO 15926 should be preceded. To accomplish this, types and properties of equipment and materials used for plant design should be predefined and these data should be represented as user-defined reference data complying with ISO 15926. Besides, the user-defined reference data should be serviced by a reference data server such that iRINGTools searches reference data from the server and utilizes the data for the model mapping. In this paper, we present a method to construct a reference data server and use it for the model mapping in iRINGTools. The proposed method is verified through experiments of exchanging specifications data of equipment and materials using iRINGTools.

• The Journal of Society for e-Business Studies
• /
• v.4 no.3
• /
• pp.95-118
• /
• 1999

There have been many research papers and practical implementations on the various EC(Electronic Commerce) aspects such as merchant system, security, payment gateway, legal and policy issues. However, it is very hard to find the systematic approaches and business process models from the viewpoint of the company willing to start B2C(Business-To-Customer) EC. Therefore, we develop business process models for the planning, systems analysis and design, implementation, and operation of internet shopping mall to suggest a guideline and reference model for the realization of successful B2C EC.

• Journal of Drive and Control
• /
• v.9 no.3
• /
• pp.1-7
• /
• 2012

This paper deals with the issue of model reference adaptive control strategy to control the injection molding machine. Prior to controller design, a pair of transfer functions are derived for the injection and dwelling process based on mathematical models of components. As external disturbances to examine the robustness of the proposed controller, nozzle clogging and contraction of molded objects are considered and realized by proportional valve. The overall simulation system, consisting of hydraulic components, controller and sensors, is implemented using the components of commercial software SimulationX. The simulation results confirm the proposed scheme's efficiency and robustness.

• Journal of the Society of Naval Architects of Korea
• /
• v.31 no.4
• /
• pp.15-22
• /
• 1994

The efforts to utilize modern computers for the hull form design of ships, started in the 1960s. In Korea, tools for the computer-aided hull form design such as FORAN system have been used from the 1970s. However, the development efforts for such tools have just started. To maximize the output from the limited research resources in this field, a reference model for the development is proposed. The model cail be used to decompose the task into sub-tasks, and to integrate the separately developed component technologies afterwards. To produce the reference model, the state-of-the-arts has been surveyed. including both foreign and domestic researches, within both shipbuilding industry and general CAD sectors. In the process, component functions for the hull form design have been identified. The reference model is constructed using these identified component functions.

• IE interfaces
• /
• v.17 no.2
• /
• pp.180-189
• /
• 2004

In this paper, we propose a reference model for logistics processes to improve the effect of RosettaNet standards application to domestic industry. First of all, implementation cases applied to logistics processes in the world are investigated. Second, logistics processes of domestic manufacturers are analyzed for the application of RosettaNet standards, and the processes are compared with PIP. Finally, a new logistics processes model and corresponding PIP documents which reflect domestic situations are proposed.