• International conference on construction engineering and project management
• /
• 2007.03a
• /
• pp.407-416
• /
• 2007

The construction industry in South Korea is experiencing great changes: it is becoming developed on a larger scale, specialized to a high degree and rapidly incorporating with other industries. This development has resulted in higher demand of construction industry. Accordingly, the transparency and an objective method of evaluation in the process of projects in the construction industry are gaining more importance. Clients' and customers' needs also require more specific objective evaluation to find whether their projects are successfully performed or not. This study aims to discuss problems on the current post-evaluation items including the qualitative item analysis such as customer satisfaction. Moreover, this paper suggests the improved ways in which enable the application of the effective evaluation system to the construction industry.

• The Research Journal of the Costume Culture
• /
• v.10 no.1
• /
• pp.49-59
• /
• 2002

The type of product and consumer characteristis have known to play an important role in the post-purchase behavior. The issue related to the effects of clothing type and sex on the process of consumer satisfaction formation, would be helpful to understand the past-purchase consumer behavior. Therefore, the objective of this study was to clarify differences in the process of satisfaction formation in relation to clothing type and sex. The study was conducted in three steps. Through the two steps, measurement instruments were developed. At the last step, judgement sampling method was utilized to collect the data and subjects were 614 university students. Factor analysis and path analysis were used to analyze the data. The process of consumer satisfaction formation in formal wear and casual wear showed some differences. In the case of format wear, only expressive product performance was found to play an important role in the process of consumer satisfaction formation. However in the case of casual wear, both expressive and instrumental product performances had influence upon clothing satisfaction directly or through consumption emotion. The results revealed a similar tendency in the process of satisfaction formation between male and female groups. However in the male group the consumption emotion had a greater effect on the process of consumer satisfaction formation than in the female group it did.

• Asia pacific journal of information systems
• /
• v.13 no.1
• /
• pp.1-22
• /
• 2003

This study describes how the weights of performance measures varies depending on business strategy types, such as defenders, prospectors, analyzers, and reactors. A Balanced Scorecard has been widely used for measuring a corporate performance to incorporate financial and non-financial measures simultaneously. Because such performance measurements are related to the compensation and promotion of employees, research of weights of performance measures would be instrumental. Our test results demonstrate that the weights of the business performance measures differ in the four perspectives-financial, customer, internal process, and learning and growth. Furthermore, there is evidence that the weights of performance measures vary depending on business strategy. Our study results can be used for enhancing the quality of performance measurement systems.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.2
• /
• pp.207-218
• /
• 2022

Changes in megatrends occurring within the spatial range of the production process can be critical factors that affect the performance of unit projects in construction industry, one of the representative order industries. Although changes in the megatrend are a prerequisite for successful performance achievement, previous studies suggested methods for performance measurement and management within the production process as major results. Accordingly, this study analyzed the megatrend related to domestic construction projects and presented critical impact factors(CIFs) that can be affect a project's performance. CIFs were set by combining keywords derived by reviewing major contents of related laws and policies and future strategy reports, and the importance of each indicator was quantitatively analyzed using analytic hierarchy process(AHP). It is expected that the findings of this study can provide meaningful basic data that the various stakeholders in a construction project can refer to when establishing the strategies to achieve successful performance.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.10a
• /
• pp.421-426
• /
• 2009

This paper presents vibration analysis of maskless exposure module in Printed Circuit Board (PCB) manufacturing system. In order to complete exposure process in PCB, masking type module has been widely used in electronics industries. However, masking process confronts some limitations of application due to higher production cost for masking as well as lower printing resolution. Therefore, maskless exposure module is started to be in the spotlight for flexible production system to meet the needs of fabrication in variable patterns at low cost. Since maskless exposure process adopts direct patterning to PCB, vibration problems become more critical compared to conventional masking type process. Moreover, movements of exposure engine as well as stage generate vibration sources in the system. Thus, it is imperative to analyze the vibration characteristics for the maskless exposure module to improve the quality and accuracy of PCB. In this study, vibration analysis using the Finite Element Analysis is conducted to identify the critical structural parts deteriorating vibration performance. Also, Experimental investigations are conducted by single/dual encoder measurement process under the operating module speed. Measurement points of vibration are selected by three places, which are base of stage, exposure engine and top of stage, to check the effect of vibration from the exposure engine. Comparisons between analysis results and experimental measurement are conducted to confirm the accuracy of analysis results including the developed FE model. Finally, this studies show feasibility of optimal design using the developed FE analysis model.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.12
• /
• pp.1322-1328
• /
• 2009

This paper presents vibration analysis of maskless exposure module in printed circuit board(PCB) manufacturing system. In order to complete exposure process in PCB, masking type module has been widely used in electronics industries. However, masking process confronts some limitations of application due to higher production cost for masking as well as lower printing resolution. Therefore, maskless exposure module is started to be in the spotlight for flexible production system to meet the needs of fabrication in variable patterns at low cost. Since maskless exposure process adopts direct patterning to PCB, vibration problems become more critical compared to conventional masking type process. Moreover, movements of exposure engine as well as stage generate vibration sources in the system. Thus, it is imperative to analyze the vibration characteristics for the maskless exposure module to improve the quality and accuracy of PCB. In this study, vibration analysis using the finite element analysis is conducted to identify the critical structural parts deteriorating vibration performance. Also, Experimental investigations are conducted by single/dual encoder measurement process under the operating module speed. Measurement points of vibration are selected by three places, which are base of stage, exposure engine and top of stage, to check the effect of vibration from the exposure engine. Comparisons between analysis results and experimental measurement are conducted to confirm the accuracy of analysis results including the developed FE model. Finally, this studies show feasibility of optimal design using the developed FE analysis model.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.4
• /
• pp.292-299
• /
• 2012

The line-of-sight(LOS) rate is estimated using Kalman filter in Radio-Frequency(RF) seeker. For the two axis gimbaled seeker, proper system modeling is considered and the basic filter structure is set up. The main issue for Kalman filter is choosing the proper process and measurement noise. For the measurement process, the signal to noise ratio(SNR) and other components are introduced. To cope with the eclipse problem or other abnormal seeker status, the pseudo input signal concept is proposed. By conditioning abnormal signals, the LOS rate estimation performance is increased. The process noise is also an important factor in the propagation phase. The analytical approach on a process noise component is performed and a reliable region for the filter is calculated based on the eigenvalue analysis. Some numerical simulations are performed to check the validity of suggested algorithm.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.18 no.3
• /
• pp.117-124
• /
• 2023

In the machine vision inspection equipment, diameter measurement is important process in inspection of cylindrical object. However, machine vision inspection equipment requires complex algorithm processing such as camera distortion correction and perspective distortion correction, and the increase in processing time and cost required for precise diameter measurement. In this paper, we proposed the algorithm for diameter measurement of cylindrical object using the laser displacement sensor. In order to fit circle for given four input outer points, grid search algorithms using root-mean-square error and mean-absolute error are applied and compared. To solve the limitations of the grid search algorithm, we finally apply the singular-value-decomposition based circle fitting algorithm. In order to compare the performance of the algorithms, we generated the pseudo data of the outer points of the cylindrical object and applied each algorithm. As a result of the experiment, the grid search using root-mean-square error confirmed stable measurement results, but it was confirmed that real-time processing was difficult as the execution time was 10.8059 second. The execution time of mean-absolute error algorithm was greatly improved as 0.3639 second, but there was no weight according to the distance, so the result of algorithm is abnormal. On the other hand, the singular-value-decomposition method was not affected by the grid and could not only obtain precise detection results, but also confirmed a very good execution time of 0.6 millisecond.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.10
• /
• pp.92-98
• /
• 2002

End mill is an essential tool to generate complex surface in workpiece and it has been developed with various materials and tool shapes. The most important factor to evaluate the performance of end mill is still the wear characteristics of flank face. In addition to the flank wear, the tool edge roughness generated by the chipping is another important factor in aspects of material property and machinability evaluation and affects the quality of machined surface. Up to now, there is no direct method for measurement of tool edge roughness. In this study, the tool edge roughness of flat end mill is indirectly measured along the axial direction of workpiece. The theoretical equation is derived in consideration of tool geometry. Finally, the optimal conditions to measure the tool edge roughness by the proposed method are presented through the theoretical review and experimental identification.

• International Journal of Internet, Broadcasting and Communication
• /
• v.10 no.2
• /
• pp.45-50
• /
• 2018

Recently the water management department advised the water treatment industry to focus on deploy the chemical free and the environmentally responsible process to adopt on water treatment plants in every country. In this objective, water treatment process started using ultrasonic based phycocyanin extraction with fluorescence measurement techniques to detect the change in the yield of phycocyanin. This paper propose the design of optical filter model for fluorescence technique based immersive optical phycocyanin measurement sensor design. The proposed design uses the multi-wavelength sensor module for irradiating part, and this plays a role of removing a wavelength band other than 590 ~ 620 nm. The preliminary study on immersed phycocyanin sensor, the fluorescence value of picocyanin according to the ultrasonic intensity, treatment time and number of cells was measured using JM phycocyanin module to emulate the proposed design, and were compared performance of the proposed sensor emulation. In this design, the phycocyanin fluorescence value increased about 2.1 ~ 4.7 times as the ultrasonic treatment time increased as compared with JM phycocyanin module, and the phycocyanin fluorescence value within the analysis range was obtained by ultrasonic treatment within one minute.