• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.17 no.1
• /
• pp.24-28
• /
• 2009

The reliability assessment is performed for Pressure Control Regulator of Aircraft Fuel System using reliability procedure which consists of the reliability analysis and the Failure Modes and Effects Analysis(FMEA). The target reliability as MTBF(Mean Time Between Failure) is set to 5000hr. During the reliability analysis process, the system is categorized by Work Breakdown Structure(WBS) up to level 3, and a reliability structure is defined by schematics of the system. Since the components and parts that have been collected through EPRD/NPRD. The predicted reliability to meet mission requirements and operating conditions is estimated as 4375.9hr. To accomplish the target reliability, the components and parts with high RPN have been identified and changed by analyzing the potential failure modes and effects. By changing the configuration design of components and parts with high-risk, the design is satisfied target reliability.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1394-1400
• /
• 2008

This study investigates the Failure Modes, Effects and Criticality Analysis (FMECA) Method for the railroad vehicle. Recently, RAMS (Reliability, Availability, Maintainability and Safety) is one of the most important issues in the railroad industry. FMECA is prerequisite for the RAMS Analysis, and it is a procedure to identify the potential failure modes and their effects and to reduce or mitigate the critical effects on the system. FMECA is used in various industries and it is specialized in each industry. For instance, MIL-1629a and SAE-J1739 are specialized FMECA method for Military industry and Automotive industry, respectively. Although the railroad industry requires the high reliability system, it does not have a specialized FMECA yet. Thus, in this paper, an FMECA method specialized to the railroad vehicle was proposed through analyses and comparison of the MIL-1629a, SAE-J1739 and IEC-60812 standards.

• Journal of the Korea Safety Management & Science
• /
• v.16 no.4
• /
• pp.229-236
• /
• 2014

Failure modes and effects analysis (FMEA) is a widely used engineering tool in the fields of the design of a product or a process to improve its quality or performance by prioritizing potential failure modes in terms of three risk factors-severity, occurrence, and detection. In a classical FMEA, the risk priority number is obtained by multiplying the three values in 10 score scales which are evaluated for the three risk factors. However, the drawbacks of the classical FMEA have been mentioned by many previous researchers. As a way to overcome these difficulties, this paper suggests the ELECTRE III that is a representative technique among outranking models. Furthermore, fuzzy linguistic variables are included to deal with ambiguous and imperfect evaluation process. In addition, when the importances for the three risk factors are obtained, the entropy method is applied. The numerical example which was previously studied by Kutlu and Ekmekio$\breve{g}$lu(2012), who suggested the fuzzy TOPSIS method along with fuzzy AHP, is also adopted so as to be compared with the results of their research. Finally, after comparing the results of this study with that of Kutlu and Ekmekio$\breve{g}$lu(2012), further possible researches are mentioned.

• Journal of Korea Multimedia Society
• /
• v.18 no.11
• /
• pp.1342-1350
• /
• 2015

Due to rapid development of mobile device technologies, the mobile banking through Internet has become a major service of banking information systems as a security-critical information systems. Recently, lots of mobile banking information systems which handle personal and transaction information have been exposed to security threats in vulnerable security control and management processes, mainly software systems. Therefore, in this paper, we propose a process model for software security improvements in mobile banking information system by application of fault tree analysis(FTA) and failure modes and effects analysis(FMEA) on the most important activities such as 'user authentication' and 'access control' and 'virus detection and control' processes which security control and management of mobile banking information systems are very weak.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.7 no.3
• /
• pp.133-141
• /
• 2012

Service and manufacturing companies' efforts are increasingly focused on utilizing services to satisfy customers' needs and survive in today's competitive market environment. The value of services depends mainly on service reliability that is identified by satisfaction derived from the relationship between customer and service provider. In this paper, we extend concepts from the failure modes and effects analysis of tangible systems to services. We use an event-based process model to facilitate service design and represent the relationships between functions and failures in a service. The objective of this research is to propose a method for evaluating service reliability based on service processes using fuzzy failure mode effects analysis (FMEA) and grey theory. We define the failure mode of service as interaction ways that can be failed in a service delivery process. The fuzzy set theory is used to characterize service reliability based on linguistic terms during FMEA. Grey theory is employed to determine the degree of relation and ranking among risk factors that are represented as potential failure causes. To demonstrate implementation of the proposed method, we use a case study involving a typical automotive service operation.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.12
• /
• pp.1193-1200
• /
• 2008

The procedure of design for reliability which consists of reliability analysis and Failure Modes and Effects Analysis(FMEA) is established and reliability assesment is performed for the nano-satellite air-launching rocket, Mirinae II. By means of using the reliability analysis result, the feasibility to insert the Mirinae II to the target orbit for given mission time under operating environment is assessed. During the reliability analysis process, the system is categorized by Work Breakdown Structure(WBS), and reliability structure is defined by both Reliability Block Diagram(RBD) and schematics of the system. FMEA is used to determine the risk priority number of components and parts. The target reliability is satisfied by changing the design of components and parts with high-risk, hence the design for reliability to put the satellite in to the target orbit safely has been performed.

• Journal of Applied Reliability
• /
• v.10 no.2
• /
• pp.93-105
• /
• 2010

The following thesis provides an explanation for the definition of the MIL-HDBK-2155 : Failure Reporting, Analysis and Corrective Action System (FRACAS), which systemizes the collection and analysis of failure data and the feedback process of the results. It also presents a plan based on MIL-HDBK-2155 for the collection and analysis of operating specifications on weapon systems. The collection and analysis of failure data and the feedback process utilizing FRACAS contributes to identifying improvement requirements during equipment operation as well as finding and eliminating the root cause of the failures. The objective of applying FRACAS to weapon systems is to receive source data feedback for reliability enhancements and performance improvements during operation. This is done by recognizing weaknesses in the design or operation by identifying the type of failures that might occur, and by performing Failure Modes, Effects and Criticality Analysis(FMECA) and Failure Tree Analysis(FTA).

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1529-1532
• /
• 2007

Failure Mode, Effects, and Criticality Analysis (FMECA) is an extension of FMEA which includes a criticality analysis. The criticality analysis is used to chart the probability of failure modes against the severity of their consequences. The result highlights failure modes with relatively high probability and severity of consequences, allowing remedial effort to be directed where it will produce the greatest value. However, there are several limitations. Measuring severity of failure consequences is subjective and linguistic. Since The result of FMECA only gives qualitative and quantitative informations, it should be re-analysed to prioritize critical units. Fuzzy set theory has been introduced by Lotfi A. Zadeh (1965). It has extended the classical set theory dramatically. Based on fuzzy set theory, fuzzy logic has been developed employing human reasoning process. IF-THEN fuzzy rule based assessment approach can model the expert's decision logic appropriately. Fault tree analysis (FTA) is one of most common fault modeling techniques. It is widely used in many fields practically. In this paper, a simple fault tree analysis is proposed to measure the severity of components. Fuzzy rule based assessment method interprets linguistic variables for determination of critical unit priorities. An rail-way transforming system is analysed to describe the proposed method.

• Journal of the Korean Society of Safety
• /
• v.33 no.4
• /
• pp.1-7
• /
• 2018

This paper is analyzed for the thermal characteristics(1 year) of the 6 components(DC breaker, DC filter(including capacitor and discharge resistance), IGBT(Insulated gate bipolar mode transistor), AC filter, AC breaker, etc.) of a photovoltaic power generation-based PCS(Power conditioning system) below 20 kW. Among the modules, the discharge resistance included in the DC filter indicated the highest heat at $125^{\circ}C$, and such heat resulting from the discharge resistance had an influence on the IGBT installed on the rear side the board. Therefore, risk priority through risk priority number(RPN) of FMEA(Failure modes and effects analysis) sheet is conducted for classification into top 10 %. According to thermal characteristics and FMEA, it is necessary to pay attention to not only the in-house defects found in the IGBT, but also the conductive heat caused by the discharge resistance. Since it is possible that animal, dust and others can be accumulated within the PCS, it is possible that the heat resulting from the discharge resistance may cause fire. Accordingly, there are two options that can be used: installing a heat sink while designing the discharge resistance, and designing the discharge resistance in a structure capable of avoiding heat conduction through setting a separation distance between discharge resistance and IGBT. This data can be used as the data for conducting a comparative analysis of abnormal signals in the process of developing a safety device for solar electricity-based photovoltaic power generation systems, as the data for examining the fire accidents caused by each module, and as the field data for setting component management priorities.

• International Journal of High-Rise Buildings
• /
• v.2 no.2
• /
• pp.141-152
• /
• 2013

This paper presents a brief overview of the recently developed performance-control method of moment frame design subjected to monotonously increasing lateral loading. The final product of any elastic-plastic analysis is a nonlinear loaddisplacement diagram associated with a progressive failure mechanism, which may or may not be as desirable as expected. Analytically derived failure mechanisms may include such undesirable features as soft story failure, partial failure modes, overcollapse, etc. The problem is compounded if any kind of performance control, e.g., drift optimization, material savings or integrity assessment is also involved. However, there is no reason why the process can not be reversed by first selecting a desirable collapse mechanism, then working backwards to select members that would lead to the desired outcome. This article provides an overview of the newly developed Performance control methodology of design for lateral resisting frameworks with a view towards integrity control and prevention of premature failure due to propagation of plasticity and progressive P-delta effects.