• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.4
• /
• pp.2344-2349
• /
• 2015

In Korea, summer is hot and humid, and air-conditioners consume too much electricity due to large amount of latent heat. Simultaneous usage of dehumidifier may reduce the latent heat and save the electricity. In this study, dehumidification performance was measured in a constant temperature and humidity chamber for a small-sized dehumdification rotor made of inorganic fiber impregnated with metallic silicate. Variables were rotor speed, room temperature, regeneration temperature, room relative humidity and frontal velocity to the rotor. Results showed that there existed optimum rotor speed (1.0 rpm), and optimum regeneration temperature ($100^{\circ}C$). Above the optimum rotor speed, incomplete regeneration is responsible for reduced dehumidification. Above the optimum regeneration temperature, increased temperature difference between regeneration and dehumidification process is responsible for reduced dehumidification. The amount of dehumidification also increases with the increase of relative humidity, dehumidification temperature and flow velocity into the rotor.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.7
• /
• pp.585-592
• /
• 2016

Visualization was done by using $CH^*$ chemiluminescence images and PMT measurements in order to understand the origin of fluctuating pressure and chemical luminosity at about 500 Hz frequency even in stable combustion, which was observed in recent experimental tests, and to find the physical correlation leading to Low Frequency Instability(LFI) in terms of phase angle. In stable combustion, chemical reactions are distributed along the shear layer flow showing a negative coupling(about 180 degree in phase angle) with combustion pressure. However, phase difference is shifted to a positive coupling showing less than 90 degree in unstable case. Also a periodic change in the distribution of chemical reactions is observed along with local flame extinction and the appearance of big scale vortex flow. In the transition to LFI, local flame extinction and small vortex flow start to appear in a row. As seen in the bluff body wake in reactive flow, the periodic appearance of vortex flow seems to share the same physical process of BVK(Bernard Von Karman) instability generation. Thus, the appearance of local extinction in 500 Hz fluctuations is gradually amplified to complete extinctions of about 20 Hz, and it leads into LFI.

• Applied Microscopy
• /
• v.22 no.2
• /
• pp.84-96
• /
• 1992

This study was carried out to examine the $H^+$ transport mechanism by observing the properties of cellular membrane having an ${\alpha}$ type of carbonic anhydrase (CA)-containing cells in turtle urinary bladder. The urinary bladder consists of a heterogenous population of cells. As a result of fine observation with traditional thin-section electron microscopy. the bladder epithelium has three different cell types on mucosal surface. They are a basal cell, a granular cell and a third type of CA-rich cell. The CA-rich cells are divided into two distinct smaller groups within them and called them ${\alpha}$ type and ${\beta}$ type of CA cells. The ${\alpha}$ type of CA cells are responsible for the proton secretion using the proton pumps on the apical plasma membrane, while the ${\beta}$ type of CA cells secrete bicarbonate via an oppositely-directed proton pumps in their basolateral plasma membrane. After performing the freeze-fracture technique, it was shown that there were distributed a large number of intramembranous particles having a special structure on the apical membrane of ${\alpha}$ type of CA-rich cells in the process of their $H^+$ secretion. In turtle bladder ${\alpha}$ type of CA-rich cells, this particle was the only prominent structure in the apical membrane. These intramembrane rod-shaped particles probably represent the integral membrane components of the proton pump. This result may explain that carbonic anhydrase within epithelial cell of urinary bladder takes part in formation of $H^+$ and bicarbonate, that active transport of $H^+$ is done, and that the reabsorption of bicarbonate suggests transport mechanism containing $H^+$ secretion. However, it seems that more studies are required for considering their regular transport pathway.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.38 no.4
• /
• pp.399-406
• /
• 2011

Traumatic injury on tooth occurs frequently among trauma patients, and mainly occurs on tooth with premature roots which influences pulp tissue, periodontal ligament, alveolar bone, and Hertwig's epithelial root sheath. According to the degree of trauma, a number of kinds of healing process can be observed, such as complete re-vascularization of pulp, root canal obliteration, growth suspension of root apex, and invasion of alveolar bone into root canal, and there can be some complications such as necrotic change of inflammatory root resorption and partial pulp necrosis due to pulp necrosis toward complete necrosis. In this clinical case, 3 patients who had traumatic injury showed root growth suspension and alveolar bone invasion into root canal due to proliferation of periodontal ligament cell and osteocyte at the base of extraction socket into pulp chamber because of the injury on Hertwig's epithelial root sheath. If intrusion of alveolar bone into root canal due to injury on Hertwig's epithelial root sheath after having traumatic injury doesn't show any complication, the pulp may be considered to have normal vitality and doesn't need any further treatment, therefore differential diagnosis is very necessary. However, it may be accompanied with suspension of root growth, therefore, additional trauma during the treatment of injured tooth should not be applied.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.23 no.4
• /
• pp.283-292
• /
• 2007

Two-step or one-step bonding systems generally inhibit curing process of dual-cured core build-up resin composite for their adhesive acidity. In addition this dual-cured core build-up resin composite can be applied to dentin of pulp chamber and root at the time that complete the endodontic treatment. The purpose of this investigation was to determine the influence of sodium hypochlorite on rnicrotensile bond strength of dual-cured core build-up resin composite. Extracted human molars were horizontally sectioned with 1mm thickness using low speed diamond saw. After the sectioned specimens were divided into 8 groups, adhesive systems (Clearfil SE-Bond, Prime&Bond NT[2-step, 1-step], Adper Prompt L-Pop) were then applied with or without sodium hypochlorite pretreatment. The treated specimen was filled with dual-cured core build-up resin composite (Luxacore, DMG corp., German). Then light cured for 40 seconds and soaked in $37^{\circ}C$ water bath for 24 hours. After the treated specimen was grinded with 1mm width and measured rnicrotensile bond strength by testing machine. Additionally 8 teeth were prepared for SEM evaluation. The results were as follows. : NaOCl treated groups generally had lower rnicrotensile bond strength but did not show any difference statistically except Adper Prompt L-Pop. When the teeth were treated by NaOCl, though the difference of applied adhesive system, it had no statistically significant difference within the NaOCl treated groups except the relation of between ClearFil SE-Bond adhesive system and Adper Prompt L-Pop adhesive system. In the SEM evaluation, NaOCl treated groups presented relatively long resin tags and incomplete hybrid layer formation generally.

• Journal of Conservation Science
• /
• v.33 no.1
• /
• pp.25-33
• /
• 2017

The stone lantern of the four guardian kings in the Beopjusa temple at Boeun was mainly made of biotite granodiorite consisting of porphyritic-textured potassium feldspar and included in ilmenite series. A base stone made of alkali granite was buried, after founded its place during an earlier restoration process. Cracking and break out are noticeable on this object. In addition, discoloration, salt crusting, and epiphytes were observed. The lantern was vulnerable in terms of physical and structural stability caused by cracking in the front and back of the light chamber and in the non-horizontal direction. According to the conservational condition of the stone lantern, structural reinforcement was carried out based on calculations, including those on the position, size, and anchor length of the titanium stiffener. Chemical and biological pollutants were washed off without damage to the surface of the stone material. Oxygenated iron pieces were replaced with titanium. Ethyl silicate was applied to the surface of the lantern for consolidation and smooth drainage.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.18 no.1
• /
• pp.9-17
• /
• 2018

Background: The structure and function of bone tissue is maintained through a constant remodeling process, which is maintained by the balance between osteoblasts and osteoclasts. The failure of bone remodeling can lead to pathological conditions of bone structure and function. Remifentanil is currently used as a narcotic analgesic agent in general anesthesia and sedation. However, the effect of remifentanil on osteoclasts has not been studied. Therefore, we investigated the effect of remifentanil on pre-osteoclast (pre-OCs) differentiation and the mechanism of osteoclast differentiation in the absence of specific stimulus. Methods: Pre-OCs were obtained by culturing bone marrow-derived macrophages (BMMs) in osteoclastogenic medium for 2 days and then treated with various concentration of remifentanil. The mRNA expression of NFATc1 and c-fos was examined by using real-time PCR. We also examined the effect of remifentanil on the osteoclast-specific genes TRAP, cathepsin K, calcitonin receptor, and DC-STAMP. Finally, we examined the influence of remifentanil on the migration of pre-OCs by using the Boyden chamber assay. Results: Remifentanil increased pre-OC differentiation and osteoclast size, but did not affect the mRNA expression of NFATc1 and c-fos or significantly affect the expression of TRAP, cathepsin K, calcitonin receptor, and DC-STAMP. However, remifentanil increased the migration of pre-OCs. Conclusions: This study suggested that remifentanil promotes the differentiation of pre-OCs and induces maturation, such as increasing osteoclast size. In addition, the increase in osteoclast size was mediated by the enhancement of pre-OC migration and cell fusion.

• Journal of the Korean GEO-environmental Society
• /
• v.17 no.6
• /
• pp.23-31
• /
• 2016

Nowadays abnormal coldness happens frequently in Korea and frost heaving causes unexpected ground deformation which results in severe problems for structures such as roadway, railroad and cutoff slope. 'Frost heave' as one of the primary phenomenon is considered to be an important factor together with 'adfreeze bond-strength' and 'creep deformation' for structural design process in permafrost area. Therefore, the fundamental study for frost heave has to be preceded for design of geo-structures in cold region. While various experimental apparatuses have been developed, there still exist a certain level of limitation to evaluate the frost-heave characteristics as design parameters. There are no standard testing method and criteria for analyzing frost heaving in Korea because temperature controlled testing apparatuses including a freezing chamber are expensive. In this paper, a new standard freezing and thawing testing apparatus is introduced, which simulates various freezing and thawing conditions in a soil specimen by using a temperature controlled triaxial cell. Frost heaving tests were performed to assess the new testing apparatus and experimental procedure to evaluate frost heaving for soils is proposed.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.42 no.2
• /
• pp.172-179
• /
• 2015

The developmental mechanism of root formation is a complex process. Hereditary and environmental factors may affect the morphology of the developing root. A total of 12 cases was presented with permanent first molars with abberant root morphology. Clinically, these teeth appeared as a normal crown. However, radiographically, the root was slender, twisted and characterized by irregular lengths. In addition, root trunk length was shorter and pulp chamber was obliterated. In these cases, periapical radiolucency and loss of lamina dura were often observed. In 6 cases, an abnormal root of the primary second molars were also present, as well as root malformation of permanent first molars. In 3 cases, permanent central incisors also had a dysmorphic crown. These cases almost all had medical history, such as premature birth, brain infection or congenital heart disease in infants. The present paper describes cases of permanent first molars with an abnormal root that are rarely reported in literature. This case may intensify the variation in the permanent first molar and is intended to reinforce the clinician's awareness of rare morphology of the roots.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.169-169
• /
• 2008

To keep pace with scaling trends of CMOS technologies, high-k metal oxides are to be introduced. Due to their high permittivity, high-k materials can achieve the required capacitance with stacks of higher physical thickness to reduce the leakage current through the scaled gate oxide, which make it become much more promising materials to instead of $SiO_2$. As further studying on high-k, an understanding of the relation between the etch characteristics of high-k dielectric materials and plasma properties is required for the low damaged removal process to match standard processing procedure. There are some reports on the dry etching of different high-k materials in ICP and ECR plasma with various plasma parameters, such as different gas combinations ($Cl_2$, $Cl_2/BCl_3$, $Cl_2$/Ar, $SF_6$/Ar, and $CH_4/H_2$/Ar etc). Understanding of the complex behavior of particles at surfaces requires detailed knowledge of both macroscopic and microscopic processes that take place; also certain processes depend critically on temperature and gas pressure. The choice of $BCl_3$ as the chemically active gas results from the fact that it is widely used for the etching o the materials covered by the native oxides due to the effective extraction of oxygen in the form of $BCl_xO_y$ compounds. In this study, the surface reactions and the etch rate of $Al_2O_3$ films in $BCl_3/Cl_2$/Ar plasma were investigated in an inductively coupled plasma(ICP) reactor in terms of the gas mixing ratio, RF power, DC bias and chamber pressure. The variations of relative volume densities for the particles were measured with optical emission spectroscopy (OES). The surface imagination was measured by AFM and SEM. The chemical states of film was investigated using X-ray photoelectron spectroscopy (XPS), which confirmed the existence of nonvolatile etch byproducts.