• Journal of International Area Studies (JIAS)
• /
• v.22 no.2
• /
• pp.305-330
• /
• 2018

The purpose of this article is to examine whether Myanmar's experience in which dealing with the most exemplary change among rogue states or pariah state in the 21st century is feasible for North Korea's case. Recently, North Korea's willingness to dialogue, reform and open is similar to the precedent in which the Myanmar military junta dismantled its ruling system and turned over transition period through general elections in 2010 and 2015 each. The so-called 'Myanmar Model' refers to a country branded as a rogue state which has been under the international sanctions and pressure, and opening its political system and the market by choosing transformation. However, rapid changes in speed across the entire society after opening up are impossible because the political elite is only the leading role and implementation in the transition. In case of Myanmar, military culture has penetrated into society due to such a long-lasting military dictatorship, and even democratic bloc has become accustomed to authoritarian decision-making process. Furthermore, the "reserved area" of the old regime still exists in a deformed political structure that can not retrieve the interests of the military. Therefore there could not be achieved political development in term of qualification. North Korea also appears unlikely to achieve political and economic assessment in a short period of time, as civil society has not appeared due to its long dictatorship and very low economic development levels. Like Myanmar, North Korea is also likely to control the pace and direction of upcoming reforms and open, as the dictator or most powerful person chose to reform and open up. Therefore, if North Korea moves toward the 'Myanmar Model', there will be high expectations of new changes in the short term, but it could be delayed or stalled in the mid and long term.

• Journal of Climate Change Research
• /
• v.4 no.3
• /
• pp.201-210
• /
• 2013

In recent years, with the rising interest to reduce greenhouse gas emissions, the demand for using environmentally friendly product with low greenhouse gas emission is increasing in the printing industry as well. In this study, the carbon footprint of environmentally friendly product mineral paper that uses less plastic and wood than normal printing paper materials was analyzed by utilizing the life cycle assessment (LCA) technique. An analysis utilizing the LCA technique was done per the Korea carbon footprint certification guidelines and, for scope of study, it included the premanufacturing stage and manufacturing stage except for the use and disposal stages. As a result of the study, the emission coefficient of the mineral paper was calculated to be $0.81kg\;CO_2eq/kg$ and the emission from electricity usage of the entire greenhouse gas emission was calculated to be 45.85% ($0.37kg\;CO_2eq/kg$). In order to reduce greenhouse gas emission, required are the efforts to reduce the environmental loads by using energies that have relatively lower environmental loads, such as improvement in electricity usage efficiency and renewable energy, by increasing product completion rates during the manufacturing process of mineral paper.

• Journal of Climate Change Research
• /
• v.3 no.1
• /
• pp.1-12
• /
• 2012

In order to use as basic data of adaptation, this study focused on a 'Water management vulnerability estimation' in Korea. Vulnerability is estimated dividing into flood mitigation and water resource management. Temporal resolution is 2000 year and the future 2020 year, 2050 year, 2100 year via A1B scenario. Time series data was normalized. Then weight that is gotten through delphi investigation was multiplied. Vulnerability is calculated through this process. In flood mitigation vulnerability, it was estimated to adaptation ability affect relatively biggest influence. In future, some area of Gangwon-do was analyzed that the flood mitigation vulnerability increases. In water resource management, it was estimated to climate exposure affect relatively biggest influence. At 2020 yr, there is a trend toward increased in the Chungcheongbuk-do and DaeJeon, Daegu, some area of Gyeongsangnamdo. Because this study evaluate relative vulnerability of whole country and analyzed spatial distribution, when local government establishes climate change adaptation details enforcement countermeasure, this study can give help to grasp whether should invest more in some field.

• Journal of Climate Change Research
• /
• v.3 no.1
• /
• pp.13-24
• /
• 2012

CCGIS (Climate Change Adaptation Toolkit based on GIS) was developed to use as a tool for the climate change assessment and any relevant tasks involving climate change adaptation policy over Korean peninsula. The main objective of CCGIS is to facilitate an efficient and relevant information for the estimation of climate change vulnerability index by providing key information in the climate change adaptation process. In particular, the atmospheric modeling system implemented in CCGIS, which is composed of climate and meteorological numerical model and the atmospheric environmental models, were used as a tool to generate the climate and environmental IPCC SRES (A2, B1, A1B, A1T, A1FI, and A1 scenarios) climate data for the year of 2000, 2020, 2050, and 2100. This article introduces the components of CCGIS and describes its application to the Korean peninsula. Some examples of the CCGIS and its use for both climate change adaptation and estimation of vulnerability index applied to Korean provinces are presented and discussed here.

• Journal of Digital Convergence
• /
• v.17 no.3
• /
• pp.139-152
• /
• 2019

In the fourth industrial revolution and the era of convergence and integration, on the situation that the internal colleges are needed active change included in the improvement of educational quality, I tested it on the purpose of empirical analysis with SPSS v.18 how colleges' efforts on the first periodic Organization Evaluation And Accreditation System(OEAAS) affects on the Perceived Management Performances on the perspective of BSC. As the test result, the Degree of Awareness of Colleges' Efforts on the OEAAS affects on just Colleges' Learning and on Growth. The Degree Propriety of Preparation of the OEAAS affects on Customer Performance, on Internal Process Performance, and, on Finance Performance. And the Degree of Satisfaction of Internal Assessment affects on all of BSC 4 performances. The results of this research could be used on making the management idea of colleges' performance on the OEAAS. In the future, it would be needed advanced researches which are able to make relatedness to the expanse of management performance with the OEAAS.

• Journal of Korean Society of Rural Planning
• /
• v.24 no.4
• /
• pp.135-146
• /
• 2018

A Visual landscape planning and management system has been introduced and implemented by each ministry so as to solve the problems of visual landscape destruction due to recognition on the value of natural landscape of beautiful territory and various development projects. At present, this system emphasizes the importance of the visual and perceptual aspect of the landscape however, there is a lack of techniques required for comprehensively predicting, evaluating, and managing it. Furthermore, sustainable landscape management after the completion of development projects has been inadequately carried out, as the focus has been only on consultation in the planning process of the development project in institutional performance. To this end, we presented objective and standardized criteria to predict and judge the effects of development projects on landscapes before project implementation. During the implementation of the development project, the influence of the visual landscape becomes accumulated in the construction progress stage. There is a need to identify the main viewpoints and to examine the continuous changes in the landscape-influencing factors, owing to the remarkable influences on the landscape, such as the change in the topography and the change caused by the artificial structure. During the stage of managing the influence on the visual landscape after the completion of the project, the influence on landscape should be monitored by measuring the change in the continuous landscape-influencing factors and determining the extent to which the actual reduction plan has been implemented. These processes should be performed continuously to maintain the quality of the visual landscape. The change in the landscape caused by the development project is shown to cause relatively greater visual damage than other factors composing the landscape owing to the influence of the artificial factors including the structure or the building. This shows that not only detailed examination of the visual impact before the development project but also continuous management is required during and after the development project. For this purpose, we derived eight landscape-influencing factors including form/shape, line, color, texture, scale/volume, height, skyline, and landscape control point. The proposed considering to be of high utilization in that it has a clear target of the landscape influencing factors.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.2
• /
• pp.129-143
• /
• 2019

As the importance of autonomous vehicle safety is emphasized, the application of ISO-26262, a development verification guideline for improving safety and reliability, and the safety verification of autonomous vehicles are becoming increasingly important, in particular, SAE standard level 3 or higher level autonomous vehicles detect and decision the surrounding environment instead of the human driver. Therefore, if there is and failure or malfunction in the autonomous driving function, safety may be seriously affected. So autonomous vehicles, it is essential to apply and verity the safety concept against failure and malfunctions. In this study, we study the fault injection scenarios for safety evaluation and verification of autonomous vehicles using ISO-26262 part3 process and STPA were studied and safety measures for safety concept design were studied through simulation bases fault injection test.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.16 no.4
• /
• pp.491-505
• /
• 2018

As an alternative to deep geological disposal technology, which is considered as a reference concept, the domestic applicability of deep borehole disposal technology for high level radioactive waste, including spent fuel, has been preliminarily evaluated. Usually, the environment of deep borehole disposal, at a depth of 3 to 5 km, has more stable geological and geo-hydrological conditions. For this purpose, the characteristics of rock distribution in the domestic area were analyzed and drilling and investigation technologies for deep boreholes with large diameter were evaluated. Based on the results of these analyses, design criteria and requirements for the deep borehole disposal system were reviewed, and preliminary reference concept for a deep borehole disposal system, including disposal container and sealing system meeting the criteria and requirements, was developed. Subsequently, various performance assessments, including thermal stability analysis of the system and simulation of the disposal process, were performed in a 3D graphic disposal environment. With these analysis results, the preliminary evaluation of the domestic applicability of the deep borehole disposal system was performed from various points of view. In summary, due to disposal depth and simplicity, the deep borehole disposal system should bring many safety and economic benefits. However, to reduce uncertainty and to obtain the assent of the regulatory authority, an in-situ demonstration of this technology should be carried out. The current results can be used as input to establish a national high-level radioactive waste management policy. In addition, they may be provided as basic information necessary for stakeholders interested in deep borehole disposal technology.

• Physical Therapy Korea
• /
• v.26 no.3
• /
• pp.11-22
• /
• 2019

Background: Sling exercises are frequently used for the rehabilitation process of patients with shoulder joint injuries, but research on the significant frequency intensity and appropriate treatment duration for sling exercises with local vibration stimulation is lacking. Objects: The aim of this study was to investigate the effects of sling exercise with vibration on shoulder range of motion (ROM), muscle strength, pain, and dysfunction in patients with a medical diagnosis of shoulder joint injury. Methods: Twenty-two patients were randomly assigned to the experiment and control groups. Six sling exercises with and without 50 Hz vibrations were applied in the experiment and control groups, respectively. Each exercise consisted of 3 sets of 5 repetitions performed for 6 weeks. The assessment tools used included shoulder joint range of motion, muscle strength, pain level, and shoulder pain and disability index for functional disability. We conducted re-evaluations before and 3 and 6 weeks after intervention. The changes in the measurement variables were analyzed and compared between the two groups. Results: The ROM of the external rotation of the shoulder joint had a significant interaction between the group and the measurement point (F=3.652, p<.05). In both groups, we found a significant increase in external rotation angle between the measurement points (p<.05). The flexor strength of the shoulder joint significant interaction between the group and the measurement point (F=4.247, p<.05). Both the experiment (p<.01) and control groups (p<.05) showed a significant increase in shoulder flexor strength at the measurement points. After 6 weeks of the interventions, both the groups showed significantly improved VAS (p<.01), SPADI (p<.01), and orthopedic tests (p<.01). However, there was no significant difference between the group and the measurement point in terms of the clinical outcomes observed. Conclusion: The sling exercise with local vibration of 50 Hz affected the external rotation of the shoulder range of motion and improved shoulder flexor strength in the patients with shoulder injuries. Therefore, we propose the use of the sling exercise intervention with vibration in the exercise rehabilitation of patients with shoulder joint injuries.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.3
• /
• pp.312-320
• /
• 2019

One of the fastest growing segments of implant dentistry is the utilization of computed tomography (CT) scan data and treatment planning software in conjunction with guided surgery for implant reconstruction cases. Computer assisted planning systems and associated surgical templates have established a predictable, esthetic, functional technique for placing and restoring implants. Especially, a philosophy of restoratively driven implant placement has been generally adopted. Recently, a variety of commercial dental fields have released their scanning and fabricating protocols and methods for restorations. This process is still being investigated and developed for the most precise and predictable outcome. This case report describes a female patient who wanted dental implants in fully edentulous areas. Restoratively driven implant placements were performed with surgical guide and the patient was fully satisfied with the clinical results, and at 5-year post restorative follow-up assessment, both implant and prosthesis were proved clinical success.