• Journal of Gastric Cancer
• /
• 제23권4호
• /
• pp.512-522
• /
• 2023

Purpose: Dental floss clip (DFC) traction-assisted endoscopic submucosal dissection (ESD) is widely performed owing to its simplicity. This study aimed to clarify the appropriate indications for the DFC traction method in early gastric cancer when ESD is performed by less-experienced endoscopists. Methods and Methods: We retrospectively analyzed 1,014 consecutive patients who had undergone gastric ESD performed by less-experienced endoscopists between January 2015 and December 2020. Gastric ESD was performed without DFC in all cases before December 2017 [DFC (-) group, 376 cases], and ESD was performed with DFC in all cases after January 2018 [DFC (+) group, 436 cases]. The procedure time and rates of en bloc resection, complete resection, and adverse events of the groups were compared. Results: The procedure time did not differ significantly between the 2 groups. However, when comparing lesions >20 mm, the procedure time in the DFC (+) group was significantly shorter than that in the DFC (-) group (95±46 vs. 75±31, P<0.01). The procedure time for lesions located in the greater curvature of the upper or middle stomach and lesions >20 mm located in the lesser curvature side of the stomach in the DFC (+) group was significantly shorter than that in the DFC (-) group. Conclusions: The indications for DFC during gastric ESD by less-experienced endoscopists include lesions located in the greater curvature of the upper or middle stomach, and lesions >20 mm located in the lesser curvature of the stomach.

• 한국CDE학회논문집
• /
• 제18권4호
• /
• pp.250-257
• /
• 2013

This paper introduces a failure analysis procedure that underpins real-time fault prognosis. In the previous study, we developed a systematic eventization procedure which makes it possible to reduce the original data size into a manageable one in the form of event logs and eventually to extract failure patterns efficiently from the reduced data. Failure patterns are then extracted in the form of event sequences by sequence-mining algorithms, (e.g. FP-Tree algorithm). Extracted patterns are stored in a failure pattern library, and eventually, we use the stored failure pattern information to predict potential failures. The two practical case studies (marine diesel engine and SIRIUS-II car engine) provide empirical support for the performance of the proposed failure analysis procedure. This procedure can be easily extended for wide application fields of failure analysis such as vehicle and machine diagnostics. Furthermore, it can be applied to human health monitoring & prognosis, so that human body signals could be efficiently analyzed.

• Structural Engineering and Mechanics
• /
• 제34권3호
• /
• pp.351-366
• /
• 2010

A novel system identification and structural health assessment procedure of steel framed structures with semi-rigid connections is presented in this paper. It is capable of detecting damages at the local element level under normal operating conditions; i.e., serviceability limit state. The procedure is a linear time-domain system identification technique in which the structure responses are required, whereas the dynamic excitation force is not required to identify the structural parameters. The procedure tracks changes in the stiffness properties of all the elements in a structure. It can identify damage-free and damaged structural elements very accurately when excited by different types of dynamic loadings. The method is elaborated with the help of several numerical examples. The results indicate that the proposed algorithm identified the structures correctly and detected the pre-imposed damages in the frames when excited by earthquake, impact, and harmonic loadings. The algorithm can potentially be used for structural health assessment and monitoring of existing structures with minimum disruption of operations. Since the procedure requires only a few time points of response information, it is expected to be economic and efficient.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제50권11호
• /
• pp.532-540
• /
• 2001

In this paper, we propose a probabilistic tabu search strategy for function optimization. It is composed of two procedures, one is Basic search procedure that plays a role in local search, and the other is Restarting procedure that enables to diversify search region. In basic search procedure, we use Belief space and Near region to create neighbors. Belief space is made of high-rank neighbors to effectively restrict searching space, so it can improve searching time and local or global searching capability. When a solution is converged in a local area, Restarting procedure works to search other regions. In this time, we use Probabilistic Tabu Strategy(PTS) to adjust parameters such as a reducing rate, initial searching region etc., which makes enhance the performance of searching ability in various problems. In order to show the usefulness of the proposed method, the PTS is applied to the minimization problems such as De Jong functions, Ackley function, and Griewank functions etc., the results are compared with those of GA or EP.

• Wind and Structures
• /
• 제21권5호
• /
• pp.489-503
• /
• 2015

This paper surveys and complements contributions by the National Institute of Standards and Technology to techniques ensuring that the wind tunnel procedure for the design of high-rise structures is based on sound methods and allows unambiguous inter-laboratory comparisons. Developments that enabled substantial advances in these techniques include: Instrumentation for simultaneously measuring pressures at multiple taps; time-domain analysis methods for estimating directional dynamic effects; creation of large simulated extreme directional wind speed data sets; non-parametric methods for estimating mean recurrence intervals (MRIs) of Demand-to-Capacity Indexes (DCIs); and member sizing based on peak DCIs with specified MRIs. To implement these advances changes are needed in the traditional division of tasks between wind and structural engineers. Wind engineers should provide large sets of directional wind speeds, pressure coefficient time series, and estimates of uncertainties in wind speeds and pressure coefficients. Structural engineers should perform the dynamic analyses, estimates of MRIs of wind effects, sensitivity studies, and iterative sizing of structural members. The procedure is transparent, eliminates guesswork inherent in frequency domain methods and due to the lack of pressure measurements, and enables structural engineers to be in full control of the structural design for wind.

• 한국지진공학회논문집
• /
• 제26권2호
• /
• pp.59-69
• /
• 2022

The use of dampers is being considered a means to improve the seismic performance of buildings. It may take considerable time and effort to find an optimal design solution since repeated three-dimensional nonlinear time history analyses are required. Therefore, a preliminary design procedure for seismic retrofit using hysteretic dampers was proposed in this study. In the proposed procedure, the amount of retrofit (required number of dampers) is estimated from the capacity curve of the building before retrofit and allowable story drift of the building. In combining the capacity curves of the building and the dampers, the deformation demand for the dampers can be easily checked against their deformation capacity. The equations to transform the device displacement to roof displacement for the combination of capacity curves are developed. The proposed procedure was applied to the seismic retrofit design of sample buildings. The study found that the estimated capacity curve was very close to the actual capacity curve obtained from the pushover analysis, which can determine an appropriate configuration to meet the required seismic performance.

• 한국지반공학회지:지반
• /
• 제9권2호
• /
• pp.27-40
• /
• 1993

한 개의 공시체에 대해 일정한 크기의 높은 구속압력을 가하고, 단계별로 압밀배수시간을 조정하여 압밀비배수 삼축압축시헙을 할 수 있는 방법을 이 논문에서 제안하였다. 이 방법으로 시험하면 하나의 공시체로 여러 단계의 시험을 하여 강도정수를 구할 수 있음은 물론 시험시간이 종전의 다단계시험에 비해 현저히 절약된다. 이 시험에 대한 적합성을 증명하기 위하여 불교란 시료와 재성형시료에 대해 표준압축시험과 재래의 다단계시험을 수행하고 그 결과를 비교하였다. 여기서 제안하는 시험방법으로 결정된 강도정수는 다른 시험방법으로 얻은 강도정수와 잘 일치하였으며, 이 방법이 대단히 효과적이고 실용적이라는 것을 입증하였다.

• 한국중재학회지:중재연구
• /
• 제23권1호
• /
• pp.177-200
• /
• 2013

Recently, many international arbitration institutions have responded to the business requirements of their users and have revised their rules to enhance the time and cost efficiency. Korean Commercial Arbitration Board (KCAB) revised the international arbitration rule in 2011, introducing new arbitration mechanisms like the expedited procedure. Also other Asian arbitration institutions introduced the expedited procedure in their international arbitration rules. Now expedited procedures are regarded as a very attractive system in the field of international arbitration. Accordingly, this paper reviewed the expedited procedures of four Asian countries, including China(CIETAC), Hong Kong (HKIAC), Singapore(SIAC) and Korea(KCAB). The purpose of this study is to find out meaningful implications to improve the Korean system. Based on this review, some recommendations are suggested as follows. First, the scope of the expedited procedure has to be adjusted upward than the current 200 million won. Second, there should be a fee schedule only for the expedited procedure. Third, in case of small amount international disputes, written examination should be more used in the expedited procedure. Finally, KCAB should make strong efforts to improve the awareness and usage of the expedited procedure in Korea.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권3호
• /
• pp.984-996
• /
• 2014

In this paper, optimal sensing time allocation for adaptive multiband spectrum sensing-transmission procedure is investigated. The sensing procedure consists of an exploration phase and a detection phase. We first formulate an optimization problem to maximize the throughput by designing not only the overall sensing time, but also the sensing time for every stage in the exploration and detection phases, while keeping the miss detection probability for each channel under a pre-defined threshold. Then, we transform the initial non-convex optimization problem into a convex bilevel optimization problem to make it mathematically tractable. Simulation results show that the optimized sensing time setting in this paper can provide a significant performance gain over the previous studies.

• 한국경영과학회지
• /
• 제24권2호
• /
• pp.121-134
• /
• 1999

In this paper, I propose a hybrid genetic algorithm(HGAM) incorporating a greedy interchange local optimization procedure for the multiobjective vehicle scheduling problems with service due times where three conflicting objectives of the minimization of total vehicle travel time, total weighted tardiness, and fleet size are explicitly treated. The vehicle is allowed to visit a node exceeding its due time with a penalty, but within the latest allowable time. The HGAM applies a mixed farming and migration strategy in the evolution process. The strategy splits the population into sub-populations, all of them evolving independently, and applys a local optimization procedure periodically to some best entities in sub-populations which are then substituted by the newly improved solutions. A solution of the HCAM is represented by a diploid structure. The HGAM uses a molified PMX operator for crossover and new types of mutation operator. The performance of the HGAM is extensively evaluated using the Solomons test problems. The results show that the HGAM attains better solutions than the BC-saving algorithm, but with a much longer computation time.