• Journal of Korean Society of Forest Science
• /
• v.111 no.2
• /
• pp.311-318
• /
• 2022

We conducted this study to derive the site index, which is a criterion for the planting of Robinia pseudoacacia, a honey plant, and to investigate the diameter distribution change by derived site index. We applied the Chapman-Richards equation model to estimate the site index of the Robinia pseudoacacia stand. The site index was distributed within the range of 16-22 when the base age was 30 years. The fitness index of the site index estimation model was low, but we judged that there was no problem in the application because the residual distribution of the equation had not shifted to one side. We used the Weibull diameter distribution function to determine the diameter distribution of the Robinia pseudoacacia stand by site index. We used the mean diameter and the dominant tree height as independent variables to present the diameter distribution, and our analysis procedure was to estimate and recover the parameters of the Weibull diameter distribution function. We used the mean diameter and the dominant tree height of the Robinia pseudoacacia stand to show distribution by diameter class, and the fitness index for dbh distribution estimation was about 80.5%. As a result of schematizing the diameter distribution by site indices as a 30-year-old, we found that the higher the site index, the more the curve of the diameter distribution moved to the right. This suggests that if the plantation were to be established in a high site index stand, considering the suitable trees on the site, the growth of Robinia pseudoacacia woul d become active, and not onl y the production of wood but al so the production of honey would increase. We therefore anticipate that the site index classification table and curve of this Robinia pseudoacacia stand will become the standard for decision making in the plantation and management of this tree.

• Journal of Plant Biotechnology
• /
• v.50
• /
• pp.155-162
• /
• 2023

Radish (Raphanus sativus L.), a root vegetable grown worldwide, is consumed in several ways. In the cross between parental lines to produce F1 seeds of radish, the problem of low purity may arise because of pollen contamination. Therefore, we aimed to establish conditions for callus induction and regeneration so that in vitro cultured plants could be used for the propagation of stock seeds. The most effective hormone combination containing various concentrations of 2,4-D, TDZ, and kinetin was selected for callus induction using radish hypocotyl, and the induced calli were transferred to two types of hormone media to investigate the optimal conditions for shoot regeneration of the callus. The combination of 1 mg/L 2,4-D + 0.05 mg/L kin was the most effective for callus induction of RA2 and RA10, 1 mg/L 2,4-D + 0.1 mg/L kin + 0.025 mg/L TDZ of RA4, and 1 mg/L 2,4-D + 0.2 mg/L kin of RA30. Shoot regeneration of the RA4 callus occurred in both shoot regeneration media, but the frequency was much higher in the 5H+1B medium (1 mg/L NAA + 0.1 mg/L 2,4-D + 1 mg/L IPA + 0.02 mg/L GA3 + 2 mg/L zeatin + 1 mg/L BA). For the in vitro micropropagation of radish, the conditions selected in this study can assist in the propagation and maintenance of stock seeds to produce F1 seeds.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.31-31
• /
• 2010

The growth of the high-quality GaN epilayers is of significant technological importance because of their commercializedoptoelectronic applications as high-brightness light-emitting diodes (LEDs) and laser diodes (LDs) in the visible and ultraviolet spectral range. The GaN-based heterostructural epilayers have the polar c-axis of the hexagonal structure perpendicular to the interfaces of the active layers. The Ga and N atoms in the c-GaN are alternatively stacked along the polar [0001] crystallographic direction, which leads to spontaneous polarization. In addition, in the InGaN/GaN MQWs, the stress applied along the same axis contributes topiezoelectric polarization, and thus the total polarization is determined as the sum of spontaneous and piezoelectric polarizations. The total polarization in the c-GaN heterolayers, which can generate internal fields and spatial separation of the electron and hole wave functions and consequently a decrease of efficiency and peak shift. One of the possible solutions to eliminate these undesirable effects is to grow GaN-based epilayers in nonpolar orientations. The polarization effects in the GaN are eliminated by growing the films along the nonpolar [$11\bar{2}0$] ($\alpha$-GaN) or [$1\bar{1}00$] (m-GaN) orientation. Although the use of the nonpolar epilayers in wurtzite structure clearly removes the polarization matters, however, it induces another problem related to the formation of a high density of planar defects. The large lattice mismatch between sapphiresubstrates and GaN layers leads to a high density of defects (dislocations and stacking faults). The dominant defects observed in the GaN epilayers with wurtzite structure are one-dimensional (1D) dislocations and two-dimensional (2D) stacking faults. In particular, the 1D threading dislocations in the c-GaN are generated from the film/substrate interface due to their large lattice and thermal coefficient mismatch. However, because the c-GaN epilayers were grown along the normal direction to the basal slip planes, the generation of basal stacking faults (BSFs) is localized on the c-plane and the generated BSFs did not propagate into the surface during the growth. Thus, the primary defects in the c-GaN epilayers are 1D threading dislocations. Occasionally, the particular planar defects such as prismatic stacking faults (PSFs) and inversion domain boundaries are observed. However, since the basal slip planes in the $\alpha$-GaN are parallel to the growth direction unlike c-GaN, the BSFs with lower formation energy can be easily formed along the growth direction, where the BSFs propagate straightly into the surface. Consequently, the lattice mismatch between film and substrate in $\alpha$-GaN epilayers is mainly relaxed through the formation of BSFs. These 2D planar defects are placed along only one direction in the cross-sectional view. Thus, the nonpolar $\alpha$-GaN films have different atomic arrangements along the two orthogonal directions ($[0001]_{GaN}$ and $[\bar{1}100]_{GaN}$ axes) on the $\alpha$-plane, which are expected to induce anisotropic biaxial strain. In this study, the anisotropic strain relaxation behaviors in the nonpolar $\alpha$-GaN epilayers grown on ($1\bar{1}02$) r-plane sapphire substrates by metalorganic chemical vapor deposition (MOCVO) were investigated, and the formation mechanism of the abnormal zigzag shape PSFs was discussed using high-resolution transmission electron microscope (HRTEM).

• Journal of Bio-Environment Control
• /
• v.23 no.4
• /
• pp.293-302
• /
• 2014

This study was carried out to develop rain shelter which can make an appropriate size and environment for Chinese cabbage rainproof cultivation. Fifty three farms with chinese cabbage rainproof cultivation system have been investigated to set up width and height of rain shelter. Mostly the width of 6m was desired for rain shelter and the height of 1.6m for their eaves, so these values were chosen as the dimensions for rain shelter. After an analysis of their structural safety and installation costs by the specifications of the rafter pipe, Ø$25.4{\times}1.5t$ and 90cm have been set as the size of rafter that such size costs the least. This size is stable with $27m{\cdot}s^{-1}$ of wind velocity and 17cm of snow depth. Therefore it is difficult to apply this dimension to area with higher climate load. In order to sort out such problem, the rain shelter has been designed to avoid damage on frame by opening plastic film to the ridge. Once greenhouse band is loosen by turning the manual switch at the both sides of rain shelter and open button of controller is pushed then switch motor rises up along the guide pipe and plastic film is opened to the ridge. Chinese cabbage can be damaged by insects if rain shelter is opened completely as revealed a field. To prevent this, farmers can install an insect-proof net. Further, the greenhouse can be damaged by typhoon while growing Chinese cabbage therefore the effect of an insect-proof net on structural safety has been analyzed. And then structural safety has been analyzed through using flow-structure interaction method at the wind condition of $40m{\cdot}s^{-1}$. And it assumed that wind applied perpendicular to side of the rain shelter which was covered by insect-proof net. The results indicated that plastic film was directly affected by wind therefore high pressure occurred on the surface. But wind load on insect-proof net was smaller than on plastic film and pressure distribution was also uniform. The results of structural analysis by applying pressure data extracted from flow analysis indicated that the maximum stress occurred at the end of pipe which is the ground part and the value has been 54.6MPa. The allowable stress of pipe in the standard of structural safety must be 215 MPa or more therefore structural safety of this rain shelter is satisfied.

• Journal of Bio-Environment Control
• /
• v.24 no.4
• /
• pp.308-316
• /
• 2015

This study was conducted to investigate the situation of ICT apply to plastic greenhouse, and the results be apply to design of new one. A CFD analysis were conducted to monitering the ventilation and energy saving of the single span greenhouse newly designed. The causes of delay to apply ICT to plastic greenhouse are the high cost for installation(24%), insufficiency of after services(19%), often disorder(16%), unskillful management of soft ware(15%), insufficient ICT efficiency(13%) and unsatisfying of income increase(12%). The parts of problem occurred in ICT plastic greenhouse are the structure, actuator, environmental control system and sensor(approximate 14%, respectively), remote control technique(13%), plant management technique(12%), energy saving technique(10%) and utilization of software(8%). In the condition of lateral window closed, the average wind speed changed to slow, but it was faster in the condition of leeward side window opened than in the condition of lee and winward side window opened. The air movement in the condition of lateral window closed occur by air moving fan not by out air. It is not affect the room temperature but effective the uniformity of room temperature. The average temperature of low height greenhouse was uniform than high height one. The average temperature in condition of 3rd curtain opened become same with outside temperature after 2 hours, but take more 5 hours in condition of 3rd curtain closed.

• Research in Plant Disease
• /
• v.22 no.4
• /
• pp.227-235
• /
• 2016

Plant disease caused by root-knot nematode is a major problem in crop production. Using of chemical pesticides, one of the most efficient methods to control nematodes, have raised issues in toxicity to humans and animals and environmental pollution. In this study, to select actinomycete strains that have potential to serve as a microbial agent for control of nematodes, we investigated nematicidal activity of culture broth from 670 Streptomyces isolates. A culture filtrate of KRA15-528 isolate that was identified as S. flavogriseus on the basis of 16S rRNA sequence analysis, showed strong nematicidal activity against second stage of juveniles of Meloidogyne incognita and inhibited egg hatching; exposure to 10% of culture filtrate resulted in 71% juvenile mortality at 48 hours afters treatment and suppressed egg hatching by 54% at 9 days after treatment. When the KRA15-528 culture filtrate was partitioned with ethyl acetate and butanol, ethyl acetate layer exclusively showed strong activity; 91%, 53%, 30% of mortality at 1,000, 500, $250{\mu}g/ml$, respectively. Additionally, the culture filtrate suppressed gall formation on cucumber plant by M. incognita with no phytotoxicity. These results suggest that S. flavogriseus KRA15-528 has potential to serve as a microbial nematicide for the control of root-knot nematode disease.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.10 no.1
• /
• pp.3-14
• /
• 1999

Objective：This study was designed to investigate the difference between executive function of Attention Deficit/Hyperactivity Disorder(ADHD) group and that of neurotics, and to investigate the developmental aspects of ADHD group's executive function. Method：Executive function between ADHD(N=87) and Neurotics(N=19) was evaluated through their performance on the Wisconsin Card Sorting Test. The results were analyzed by 2-way ANOVA and t-test. Results：The results revealed group difference between ADHD and neurotics in total correct reponses, total error responses, nonperseverative errors, number of categories completed, conceptual level responses. There was no significant difference between the performance of 8-12 aged group and 13-15 aged group. But 7-8 aged group showed significantly poor performance than 8-12 aged in total responses, total error responses, perseverative responses, perseverative error responses, nonperseverative error responses. Conclusions：In comparison to the neurotics group, the children of ADHD group are suggested to be lacking the ability to correct their responses according to the external feedback and they probably respond randomly without self-control. However, as there is no difference between perseverative errors and perseverative responses, the interpretation of this finding warrants caution. It also suggests that the developmental aspects should be considered in the studies of executive functions because there are differences in the performance of executive functions by ages.

• Journal of agricultural medicine and community health
• /
• v.35 no.2
• /
• pp.151-164
• /
• 2010

Objective:Korea has 3,170 islands with about 188,000 inhabitants. These inhabitants' needs for health services might go unmet because of geographic isolation, slimmer availability of health services, and higher proportion of the elderly compared with the mainland population. Unmet health service needs might result in serious health problems for these island residents. Therefore, the purpose of this study was to investigate their unmet health service needs and related factors from population of Nowha island. Methods: The survey was conducted from July 30 to August 1 by trained interviewers. Target population were residents in Nohwa island and the sampling method was incomplete quota sampling. General characteristics, socioeconomic status, utilization of health service, and unmet medical service needs were investigated. First univariate and then multivariate logistic analyses were done for the statistical analysis. Results: 324 residents were surveyed and the proportion of unmet health services needs was 26.5%. People living alone and of female sex had increased health services needs based on univariable analysis. From the multivariate analysis, those living alone increased the health services needs. Self-determined low socioeconomic status and medical aid increased the proportion of unmet medical needs, but these were not statistically significant. Conclusion:In Nowha island, those who are elder, and of lower socioeconomic status had much higher unmet medical needs. The results suggest the need for more social support by qualified health services to solve this unmet medical needs problem.

• Journal of dental hygiene science
• /
• v.17 no.6
• /
• pp.501-507
• /
• 2017

The shortage of dental hygienists has been a long-standing problem in Korea. Small-scaled dental clinics suffer from a lack of dental hygienists, who seem to prefer working at large-scaled dental clinics. The purpose of this study was to confirm the differences in the working conditions according to the scales of dental clinics. We collected the working information registered via job advertisements through the web-sites of Korean Dental Hygienists Association, Dental Jobs, and Nurse Jobs from July to August 2016. The results were as follows: 96.7% of the advertisements wanted regular workers, while the proportion of part-time workers was the highest (34.8%) in the group with less than 3 employees. The average workdays per week was $5.32{\pm}0.55$ days, and the group with less than 3 employees had significantly longer workdays than the other groups. The daily working time was $8.99{\pm}0.44$ hours, and there was no difference among the groups. Night overtime hours were needed by 54.4%, 45.0%, and 31.3% of the groups with of the groups with 4~7 employees, more than 8 employees, and less than 3 employees, respectively. Information regarding annual leave (60.5%), monthly leave (63.9%), half a day off (32.4%) and vacations (43.1%) were presented in the job advertisements, and these proportions were significantly higher by the group with more than 8 employees. Information on overtime pay (14.4%), night-work pay (13.4%), incentives (34.1%), lunches (60.2%), vacation bonuses (33.8%), and self-development (20.4%) were presented in job advertisements. The group with 4~7 employees had significantly higher proportions in severance pay, vacation bonuses, self-development, and major national insurance. It is necessary to consider the improvement of working conditions, diversity of working styles, and welfare of dental hygienists, and it is suggested that small dental clinics provide more precise working conditions.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.2
• /
• pp.148-155
• /
• 2009

Statement of problem: The interest in all-ceramic restorations has increased as more techniques have become available. With the introduction of machinable dental ceramics and CAD/CAM systems there is a need to evaluate the quality levels of these new fabrication techniques. Purpose: This study is to evaluate the crown fidelity(absolute marginal discrepancy and internal gap) of various zirconia-based all-ceramic crowns fabricated with different CAD/CAM(computer-assisted design/computer-assisted manufacturing) systems and conventional cast metal-ceramic crowns. Material and methods: A resin tooth of lower right second premolar was prepared. After an impression was taken, one metal master die was made. Then 40 impressions of metal master dies were taken for working dies. 10 crowns per each system were fabricated using 40 working dies. Metal-ceramic crowns were cast by using the conventional method, and Procera, Lava, and Cerec inLab crowns were fabricated with their own CAD/CAM manufactruing procedures. The vertical marginal discrepancies and internal gaps of each crown groups were measured on a metal master die without a luting agent. The results were statistically analyzed using the one-way ANOVA and Tukey's HSD test. Results: 1. Vertical marginal discrepancies were $50.6{\pm}13.9{\mu}m$ for metal-ceramic crowns, $62.3{\pm}15.7{\mu}m$ for Procera crowns, $45.3{\pm}7.9{\mu}m$ for Lava crowns, and $71.2{\pm}2.0{\mu}m$ for Cerec inLab crowns. 2. The Internal gaps were $52.6{\pm}10.1{\mu}m$ for metal-ceramic crowns, $161.7{\pm}18.5{\mu}m$ for Procera crowns, $63.0{\pm}10.2{\mu}m$ for Lava crowns, and $73.7{\pm}10.7{\mu}m$ for Cerec inLab crowns. Conclusion: 1. The vertical marginal discrepancies of, 4 crown groups were all within the clinically acceptable range($120{\mu}m$). 2. The internal gaps of LAVA, Cerec inlab, and metal-ceramic crowns were within clinically acceptable range except Procera crown($140{\mu}m$).