• 제목/요약/키워드: ProbeX-2010

검색결과 39건 처리시간 0.027초

터너증후군 의심환자에서 2개의 SRY 유전자 발현 1예 (A Case of Two SRY Genes in a Tuner's Syndrome Feature)

  • 박상묵;김윤식
    • 대한임상검사과학회지
    • /
    • 제42권3호
    • /
    • pp.111-115
    • /
    • 2010
  • A 15-year-old female with primary amenorrhea and Tuner's syndrome feature was referred for a chromosome analysis. The karyotype of the patient was 45,X/46,X,der(Y) mosaicism under initial GTG-banding analysis. Fluorescence in situ hybridization (FISH) analysis with probe for CEP X probes and SRY probe (Vysis, Inc. Downers Grove, IL 60515, USA) was carried out. This probe is direct labeled with SpectrumOrange (SRY, Yp11.3) and is available as a single probe or mixed with the CEP X SpectrumGreen probe. SRY SpectrumOrange/CEP X SpectrumGreen hybridized to a specimen obtained from an two isodicentric Y chromosomes. The karyotype of the patient was ish Xcen(DXZ1x1)/Xcen(DXZ1x1), Yp11.3(SRYx2) by using FISH. This karyotype was considered a variant of Tuner syndrome with mixed gonadal dysgenesis (MGD), male pseudohermaphroitism (MPH) and apparently normal male.

  • PDF

2010년 여름철 수도권 집중관측기간 강수 사례들에서 나타나는 도시화 효과 (Effect of Urbanization on Rainfall Events during the 2010 Summer Intensive Observation Period over Seoul Metropolitan Area)

  • 김도우;김연희;김기훈;신승숙;김동균;황윤정;박종임;최다영;이용희
    • 한국지구과학회지
    • /
    • 제33권3호
    • /
    • pp.219-232
    • /
    • 2012
  • 도시화 효과가 여름 강수에 미치는 영향을 분석하기 위해 2010년 8월 13일부터 9월 3일까지 수도권 집중관측(ProbeX-2010)을 수행하였다. 분석 결과, 다음의 두 가지 현상들이 발견되었다. 첫째, 관측 기간 동안 약한 강수(${\leq}1\;mm\;hr^{-1}$)가 다른 지역보다 서울 풍하측 지역에서 더 자주 발생하였으며, 이는 최근 5년(2006-2010) 자료에서도 확인되었다. 약한 강수는 주로 서울 풍하측 산악 지역에서 야간에 더 자주 발생하였기 때문에 이는 도시지형 뿐만 아니라 산악 지형의 복합적인 효과로 여겨진다. 둘째, 간헐적으로 대류 시스템이 서울 풍하측에서 급격하게 발달해 호우를 야기했다. 이는 특히 8월 27일 1300-1500 KST의 일련의 레이더 영상에서 뚜렷하게 확인되었다. 본 연구에서는 이 강수 사례에 대한 종관 국지적 날씨 특성과 고층 대기 특성을 자세히 분석하였다. 그 결과 도시지형과 연관된 지표 현열 증가뿐만 아니라 조건부 불안정 대기 상태(특히 대기 하층)와 대기 하층의 습기 유입이 도시화 효과와 연관된 대류성 호우를 야기하는 중요한 요소로 제시되었다.

전자기 수치해석을 이용한 표준보정시험편의 배열형 와전류 탐촉자 신호 특성 해석 (Characteristic Analysis of Eddy Current Array Probe Signal in Combo Calibration Standard Tube Using Electromagnetic Numerical Analysis)

  • 김지호;이향범
    • 비파괴검사학회지
    • /
    • 제30권4호
    • /
    • pp.330-337
    • /
    • 2010
  • 본 논문은 원전 증기발생기(SG, steam generator) 세관의 정밀 진단을 위한 차세대 탐촉자인 배열형 와전류 탐촉자의 특성 해석에 대한 3차원 전자기 수치해석을 수행하였다. 다양한 결함 해석을 위해 ASME(American Society of Mechanical Engineers) 표준시험편과 X-probe combo 표준보정시험편(inline EXP/spiral groove combo standard)을 선정하여 탐상신호를 획득하고, 실제 실험 신호와 비교하여 결과의 타당성을 검증하였다. 표준 보정 시험편의 해석 결과를 바탕으로 원전 SG 세관에서 주로 발생하고 있는 pitting, SCC(stress corrosion cracking), multiple SCC, wear 결함에 대하여 탐상신호를 획득하였다. 해석 대상으로는 원자력발전소 SG 세관으로 사용하고 있는 Inconel 600 도체관을 사용하였고, 이때의 시험주파수는 300 kHz이다. 본 논문을 통하여 각각의 결함에 대한 신호 특성을 파악하여 배열형 와전류 탐촉자의 결함의 종류에 따른 신호 특성을 확인할 수 있었다. 본 논문의 결과는 배열형 와전류 탐촉자의 와전류 탐상 신호 평가시 도움이 될 것이다.

프로브 카드의 열변형 최적화 (Optimization of Thermal Deformation in Probe Card)

  • 장용훈;인정제
    • 한국산학기술학회논문지
    • /
    • 제11권11호
    • /
    • pp.4121-4128
    • /
    • 2010
  • 프로브 카드는 웨이퍼의 칩 검사에 사용된다. 또한 반도체의 고집적화에 따른 미세피치 대응으로 높은 위치 정도가 요구된다. 그러나 실제 장비에서는 하부 척에서 높은 열이 프로브 카드로 전달되어, 프로브 카드의 열변형을 초래하게 된다. 프로브 카드의 수직방향 열변형은 핀의 접촉관련 문제를 야기할 것이고, 수평방향의 열변형은 x-y 방향으로의 위치 오차를 만들 것이다. 따라서 프로브 카드는 허용 범위내의 열변형이 이루어지도록 재질과 구조를 갖게 설계되어야 한다. 본 연구에서는 유한요소 해석프로그램인 ANSYS$^{TM}$를 이용하여 프로브 카드의 실제 부하 조건들을 적용한 열전달 해석을 수행하였다. 정상상태 온도 구배에 대해 열변형이 계산되었으며, 최종적으로 적절한 설계변수들을 조정하여 열변형이 최소화 될 수 있는 새로운 구조를 제안하였다.

Characterization of Individual Atmospheric Aerosols Using Quantitative Energy Dispersive-Electron Probe X-ray Microanalysis: A Review

  • Kim, Hye-Kyeong;Ro, Chul-Un
    • Asian Journal of Atmospheric Environment
    • /
    • 제4권3호
    • /
    • pp.115-140
    • /
    • 2010
  • Great concerns about atmospheric aerosols are attributed to their multiple roles to atmospheric processes. For example, atmospheric aerosols influence global climate, directly by scattering or absorbing solar radiations and indirectly by serving as cloud condensation nuclei. They also have a significant impact on human health and visibility. Many of these effects depend on the size and composition of atmospheric aerosols, and thus detailed information on the physicochemical properties and the distribution of airborne particles is critical to accurately predict their impact on the Earth's climate as well as human health. A single particle analysis technique, named low-Z particle electron probe X-ray microanalysis (low-Z particle EPMA) that can determine the concentration of low-Z elements such as carbon, nitrogen and oxygen in a microscopic volume has been developed. The capability of quantitative analysis of low-Z elements in individual particle allows the characterization of especially important atmospheric particles such as sulfates, nitrates, ammonium, and carbonaceous particles. Furthermore, the diversity and the complicated heterogeneity of atmospheric particles in chemical compositions can be investigated in detail. In this review, the development and methodology of low-Z particle EPMA for the analysis of atmospheric aerosols are introduced. Also, its typical applications for the characterization of various atmospheric particles, i.e., on the chemical compositions, morphologies, the size segregated distributions, and the origins of Asian dust, urban aerosols, indoor aerosols in underground subway station, and Arctic aerosols, are illustrated.

Lorentz Force Density Distribution of a Current Carrying Superconducting Tape in a Perpendicular Magnetic Field

  • Yoo, J.;Kwak, K.;Rhee, J.;Park, C.;Youm, D.;Park, B.J.;Han, Y.H.
    • 한국초전도ㆍ저온공학회논문지
    • /
    • 제12권4호
    • /
    • pp.13-16
    • /
    • 2010
  • The Lorentz force distribution of a high $T_c$ superconducting tape with increasing transport currents in magnetic field ($H_a$) was visualized. The external magnetic field was applied normally to the coated conductor tape surface after zero-field cooling, and the transport current ($I_a$) was increased stepwise from 0 to 90 % of the values of the critical current ($I_c$ ($H_a$)) at applied filed, Ha. The field distribution (H(x)) near the sample surface across the tape width (2w) was measured using the scanning Hall probe method. Applying an inversion to the measured field distribution, we obtained the underlying current distribution (J(x)), from which the magnetic induction, B(x) was calculated with Biot-Savart law. Then Lorentz force per unit length was calculated using F(x)=J(x)${\times}$B(x), which appears to be very inhomogeneous along the tape width due to the complicated distributions of J(x) and B(x).

(InTe)x(GeTe) 박막의 비정질-결정질 상변화 (Amorphous-to-Crystalline Phase Transition of (InTe)x(GeTe) Thin Films)

  • 송기호;백승철;이현용
    • 한국전기전자재료학회논문지
    • /
    • 제23권3호
    • /
    • pp.199-205
    • /
    • 2010
  • The crystallization speed (v) of amorphous (InTe)$_x$(GeTe) (x = 0.1, 0.3 and 0.5) films and their thermal, optical and electrical behaviors have been investigated using nano-pulse scanner (wavelength = 658 nm, laser beam diameter < 2 ${\mu}m$), X-ray diffraction (XRD), 4-point probe and UV-vis-IR spectrophotometer. These results were compared with those of $Ge_2Sb_2Te_5$ (GST) film, comprehensively utilized for phase-change random access memory (PRAM). Both v-value and thermal stability of (InTe)$_{0.1}$(GeTe) and (InTe)$_{0.3}$(GeTe) films could be enhanced in comparison with those of the GST. Contrarily, the v-value in the (InTe)$_{0.5}$(GeTe) film was so drastically deteriorated that we could not quantitatively evaluate it. This deterioration is thought because amorphous (InTe)$_{0.5}$(GeTe) film has relatively high reflectance, resulting in too low absorption to cause the crystallization. Conclusively, it could be thought that a proper compositional (InTe)$_x$(GeTe) films (e.g., x < 0.3) may be good candidates with both high crystallization speed and thermal stability for PRAM application.

HBr/Ar/CHF3 혼합가스를 이용한 ZnO 박막의 유도결합 플라즈마 식각 (Etching Characteristics of ZnO Thin Films Using Inductively Coupled Plasma of HBr/Ar/CHF3 Gas Mixtures)

  • 김문근;함용현;권광호;이현우
    • 한국전기전자재료학회논문지
    • /
    • 제23권12호
    • /
    • pp.915-918
    • /
    • 2010
  • In this work, the etching characteristics of ZnO thin films were investigated using an inductively coupled plasma(ICP) of HBr/Ar/$CHF_3$ gas mixtures. The plasma characteristics were analyzed by a quadrupole mass spectrometer (QMS) and double langmuir probe (DLP). The surface reaction of the ZnO thin films was investigated using X-ray photoelectron spectroscopy (XPS). The etch rate of ZnO was measured as a function of the $CHF_3$ mixing ratio in the range of 0-15% in an HBr:Ar=5:2 plasma at a fixed gas pressure (6mTorr), input power (700 W), bias power (200 W) and total gas flow rate(50sccm). The etch rate of the ZnO films decreased with increasing $CHF_3$ fraction due to the etch-blocking polymer layer formation.

A Chromo- and Fluoroionophoric Thiaoxaaza-Macrocycle Functionalized with Nitrobenzofurazan Exhibiting Mercury(II) Selectivity

  • Lee, Ji-Eun;Lee, Shim-Sung;Choi, Kyu-Seong
    • Bulletin of the Korean Chemical Society
    • /
    • 제31권12호
    • /
    • pp.3707-3710
    • /
    • 2010
  • A chromo/fluorogenic $NO_2S_2$-macrocycle L functionalized with nitrobenzofurazan unit as a dual-signaling probe was synthesized and structurally characterized by single crystal X-ray analysis. In a cation-induced color change experiment, L exhibited excellent $Hg^{2+}$ ion selectivity by showing the color change from orange-red to yellow. However, this hypochromic shift by $Hg^{2+}$ was observed for the weaker coordinating anion system such as ${NO_3}^-$ and ${ClO_4}^-$ ions. The observed anion effect is due to the strong coordination of anions inhibits the bond formation between $Hg^{2+}$ and the macrocyclic tert-N atom, which is sensitive to induce the color change. In the fluorometric experiment, L showed chelate-enhanced fluorescence change effect only with $Hg^{2+}$ ion, together with a change from yellow to green emission. The sensing ability for $Hg^{2+}$ with the proposed chemosensor L is due to the stable complexation with 1:1 stoichiometry (metal-to-ligand).

Organic additive effects in physical and electrical properties of electroplated Cu thin film

  • 이연승;이용혁;강성규;주현진;나사균
    • 한국재료학회:학술대회논문집
    • /
    • 한국재료학회 2010년도 춘계학술발표대회
    • /
    • pp.48.1-48.1
    • /
    • 2010
  • Cu has been used for metallic interconnects in ULSI applications because of its lower resistivity according to the scaling down of semiconductor devices. The resistivity of Cu lines will affect the RC delay and will limit signal propagation in integrated circuits. In this study, we investigated the characteristics of electroplated Cu films according to the variation of concentration of organic additives. The plating electrolyte composed of $CuSO_4{\cdot}5H_2O$, $H_2SO_4$ and HCl, was fixed. The sheet resistance was measured with a four-point probe and the material properties were investigated with XRD (X-ray Diffraction), AFM (Atomic Force Microscope), FE-SEM (Field Emission Scanning Electron Microscope) and XPS (X-ray Photoelectron Spectroscopy). From these experimental results, we found that the organic additives play an important role in formation of Cu film with lower resistivity by EPD.

  • PDF