• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.7
• /
• pp.531-538
• /
• 2017

A flush air data sensing system, which can predict flight speed, angle of attack, and angle of sideslip of the aircraft is designed and manufactured for a small UAV. Two kinds of flush pressure ports, four ports and five ports, are tapped at the same section of fuselage nose-cone. Calibration pressure data at flush ports are obtained through computations for the total aircraft by using Fluent code. Angle of attack, angle of sideslip, total pressure, and static pressure are represented with 4th-order polynomial function and calibration coefficient matrix is obtained using least square method with calibration pressure data. Flight test showed that flight speed, angle of attack, and sideslip angle predicted by four flush ports and five flush ports compared well with those by five-hole probe installed for data comparison. Especially four flush ports revealed nearly same results as those by five flush ports.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.9
• /
• pp.1131-1138
• /
• 2019

The importance of coatings has been increasing for different purposes such as prevention of static electricity of auto parts or products, improvement of abrasion and corrosion resistance, and enhancement of esthetics. As a method for measuring the thickness of a coating film, a contact method with probe is commonly used. However, it is problematic that accuracy of the sensor is degraded due to sensor output distortion or load phenomenon, which is caused by a change in magnetic permeability of the core. In this study, we propose a method to reduce the measurement error of the coating film by applying the optimized circuit design and the thickness measurement algorithm to the problems caused by the nonlinear characteristics. The tests result which have been taken with different thickness coating samples show that the measurement accuracy is within ${\pm}2%$.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.5
• /
• pp.142-155
• /
• 2019

This study was conducted with the aim of developing a system to collect taxi GPS probe information to prevent link defects and to improve the accuracy of the standard link-based travel speed by determining when to go into and come out the link. For this purpose, a framework and algorithm consisting of a five-step process for standard link-based map matching and individual vehicle travel speed are presented and used it to calculate the average travel speed of the service link. Two on-site surveys of Teheran and Hakdong-ro were conducted to verify the results by the methods proposed in this paper. On the basis of the overall time of the field survey, the deviation in the travel speed was 0.2 km/h and 0.6 km/h, the accuracy was 99% and 96%, and the MAPE(Mean Absolute Percentage Error) was 1% and 4% in Teheran and Hakdong-ro, respectively. These results were more accurate thand those obtained using conventional methodologies without standard links.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.6
• /
• pp.133-146
• /
• 2021

Providing weather information on roads today means that the road weather conditions near weather observation points are presented to road managers and road users. These weather observation points are managed by the Korea Meteorological Administration. However, it is difficult to provide accurate weather information due to physical limitations such as the presence of precipitation collection points, distance to weather information provision roads, and the presence of mountains. Therefore, this study intends to perform a comparative analysis by time zone and administrative dong provided by the Meteorological Administration using the wiper information among the information contained in the PVD(Probe Vehicle Data) collected from the highway C-ITS project. As a result of the analysis it was possible to detect rainfall even in the event of local rainfall and rainfall over a long period of time and the higher the cumulative precipitation per hour, the higher the probability of coincidence. This study is meaningful because it used PVD to solve the limitations of the existing road weather information provision method and suggested utilization plan for PVD.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.1
• /
• pp.71-78
• /
• 2018

Transportation is gradually changing into the era of V2X and autonomous cars. Accurate judgement of traffic conditions is an important indicator of route choice or autonomous driving. There are many ways to use probes car such as taxis, as a way to identify accurate traffic conditions. These methods may vary depending on the characteristics of the probe vehicle, and there is a problem with the cost. The V2X vehicle can solve these problems and collect traffic information in real time. If all vehicles are of V2X vehicle, these issues are expected to be resolved briefly. However, if the communication information of a V2X vehicle is represented by a traffic representative in a traffic with only V2X, the traffic information of some V2X vehicles will be able to collect traffic information. To accomplish this, a virtual network and transport were created and various scenarios were performed through SUMO simulations. It has been analyzed that 3-5 % of V2 vehicles are capable of representative the road traffic characteristics. In the future, various follow-up studies are planned.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.5
• /
• pp.61-66
• /
• 2012

We propose a traffic information service system for which traffic data are transmitted over vehicle ad-hoc network from neighbor vehicles, and eventually provided to the traffic information center through a few gateway vehicles which are capable of inter-working with the infrastructure network like 3G. The center broadcasts the traffic information through the FM radio. The proposed scheme allows collecting and analyzing traffic status of large areas without incorporating separated monitoring systems, e.g., probe cars and enables to provide accurate traffic information to drivers in timely manner. We also evaluate its performance by ns-3 simulation.

• International Journal of Highway Engineering
• /
• v.19 no.6
• /
• pp.147-153
• /
• 2017

PURPOSES : This research aims to estimate the occurrence of hydroplaning on roads based on the road alignment types and rainfall intensity in Seoul. METHODS : Three types of data were used for estimation of hydroplaning in this study. The Inner Circulation Road (12.5 km) to the Bukbu Expressway (7.4 km) in Seoul was selected as the test road and data was collected for road information using a probe-vehicle. Precipitation was observed from Automatic Weather System in Seoul. These data were interpolated by applying Inverse Distance Weighted Methodology for hydroplaning estimation. Finally, the water depth information of the roads was observed using an RCM411 device. RESULTS : This study demonstrated that the cross slope with small-angle-tilt or vertical section with large-angle-tilt are the primary factors causing hydroplaning on the roads. The flow velocity on steep slope is high; however, large drainage lengths result in hydroplaning on the roads. CONCLUSIONS : This result can contribute towards the reduction of car accidents on rainy days. Furthermore, information regarding hydroplaning can be delivered to drivers more rapidly and precisely in the future.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.6
• /
• pp.45-51
• /
• 2013

Friction stir welding using aluminum alloys has been widely applied for transportation vehicles because of the light specific weight, which can be used to obtain sound joint and high mechanical properties. This study shows the effects of rotation speed, welding speed, welding load, and tool shape on defect formation with extruded AA6005, which is used for railway vehicle structures of non-uniform thickness welded by friction stir welding using load control systems. Optical microscopy observations and liquid penetrant testing of each FSW joint were carried out in order to observe defect formation. Two kinds of defects, that of probe wear and that of lack of penetration in the bottom of the welded zone, were observed. In the case of using a taper shaped tool, the defect free zone is very narrow, within 100 kgf; however, in case of using a cylindrical shape tool, the defect free zone is wider.

• International Journal of Automotive Technology
• /
• v.8 no.5
• /
• pp.575-581
• /
• 2007

As current and future automobile emission regulations become more stringent, the research on flow distribution for an exhaust manifold and close-coupled catalyst(CCC) has become an interesting and remarkable subjects. The design of a CCC and exhaust manifold is a formidable task due to the complexity of the flow distribution caused by the pulsating flows from piston motion and engine combustion. Transient flow at the exhaust manifold can be analyzed with various computational fluid dynamics(CFD) tools. However, the results of such simulations must be verified with appropriate experimental data from real engine operating condition. In this study, an experimental approach was performed to investigate the flow distribution of exhaust gases for conventional cast types and stainless steel bending types of a four-cylinder engine. The pressure distribution of each exhaust sub-component was measured using a simulated dynamic flow bench and five-hole pitot probe. Moreover, using the results of the pitot tube measurement at the exit of the CCC, the flow distribution for two types of manifolds(cast type and bending type) was compared in terms of flow uniformity. Based on these experimental techniques, this study can be highly applicable to the design and optimization of exhaust for the better use of catalytic converters to meet the PZEV emission regulation.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.1 no.1
• /
• pp.41-51
• /
• 2002

As Advanced Traveler Information System(ATIS) is the kernel of the Intelligent Transportation System, it is very important how to manage data from traffic information collectors on a road and have at borough grip of the travel time's change quickly and exactly for doing its part. Link travel time can be obtained by two method. One is measured by area detection systems and the other is estimated by point detection systems. Measured travel time by area detection systems has the limitation for real time information because it Is calculated by the probe which has already passed through the link. Estimated travel time by point detection systems is calculated by the data on the same time of each. section, this is, it use the characteristic of the various cars of each section to estimate travel time. For this reason, it has the difference with real travel time. In this study, Artificial Neural Networks is used for estimating link travel time concerned about the relationship with vehicle detector data and link travel time. The method of estimating link travel time are classified according to the kind of input data and the Absolute value of error between the estimated and the real are distributed within 5$\~$15minute over 90 percent with the result of testing the method using the vehicle detector data and AVI data of Namsan Tunnel $\#$1. It also reduces Time lag of the information offered time and draws late delay generation and dissolution.