• 한국균학회지
• /
• 제27권2호통권89호
• /
• pp.132-137
• /
• 1999

본 연구는 느타리버섯 갈반병 병원균인 pseudomonas tolaasii의 진단을 위한 분자 marker를 개발하기 위해 수행되었다. 세균의 반복염기서열과 펙틴 분해효소 유전자로부터 제작된 여러개의 primer들을 이용해 식용버섯으로부터 분리된 Pseudomonas종들로부터 DNA 다형성을 유도한 바펙틴 분해 효소로부터 제작된 PEU1 primer는 다른 Pseudomonas종들로부터 P. tolaasii를 구분시키는 다형성 밴드를 생성하였다. P. tolaasii 6균주에 공통적으로 나타나는 1.0kb와 0.4kb의 두 가지 밴드를 pGEM-T에 클로닝하고 이들을 각기 pPTOP1과 pPTOP2로 명명하고 probe로 이용하였다. 0.4kb 크기의 pPTOP2의 삽입 DNA는 P. tolaasii 6균주와 hybridization이 이루어진 반면 다른 Pseudomonas종과는 반응하지 않았다. 0.4kb크기의 pPTOP2의 삽입 DNA를 probe로 이용해 dot blot hybridization한 결과 P. tolaasii는 $1.5{\times}10^3\;cfu$까지 검출이 가능함을 확인하였다.

• Archives of Plastic Surgery
• /
• 제47권4호
• /
• pp.365-370
• /
• 2020

The ability to directly harvest thin and superthin perforator flaps without jeopardizing their vascularity depends on knowledge of the microsurgical vascular anatomy of each perforator within the subcutaneous tissue up to the dermis. In this paper, we report our experience with ultrahigh-frequency ultrasound (UHF-US) in the preoperative planning of thin and superthin flaps. Between May 2017 and September 2018, perforators of seven patients were preoperatively evaluated by both ultrasound (using an 18-MHz linear probe) and UHF-US (using 48- and 70-MHz linear probes). Thin flaps (two cases) and superthin flaps (five cases) were elevated for the reconstruction of head and neck oncologic defects and lower limb traumatic defects. The mean flap size was 6.5×15 cm (range, 5×8 to 7.5×23 cm). No complications occurred, and all flaps survived completely. In all cases, we found 100% agreement between the preoperative UHF-US results and the intraoperative findings. The final reconstructive outcomes were considered satisfactory by both the surgeon and the patients. In conclusion, UHF-US was found to be very useful in the preoperative planning of thin and superthin free flaps, as it allows precise anticipation of very superficial microvascular anatomy. UHF-US may represent the next frontier in thin, superthin, and pure skin perforator flap design.

• 한국광물학회지
• /
• 제11권2호
• /
• pp.117-125
• /
• 1998

Crystallization behavior of platinum minerals within Pt-Sb-Bi bearing ore magmas and mineralogical properties of the existing minerals were investigated at 1,00$0^{\circ}C$ by synthetic experiment. High purity reagents were used as starting materials and silica tubings as containers. Reaction products were analysed by reflecting microscopy, X-ray diffraction, electron probe microanalysis, and micro-hardness test. Stable minerals at 1,00$0^{\circ}C$ are platinum, electron probe microanalysis, and micro-hardness test. Stable minerals at $1,000^{\circ}C$ are platinum, stump-flite (PtSb) and geversite (PtSb2). They are in equilibrium with liquid (ore magma). Platinum contains considerable amount of Sb of 7.5 at.%, whereas Bi only up to 0.9 at.%. Pure stumpflite is hexagonal with space group P63/mmc, and unit cell parameters are a=4.1318(6), c=5.483(1)$\AA$. VHN50=417(2)$\AA$. Geversite has cubic structure with space group Pa3. Cell parameters are a=6.4373(2)$\AA$ and Vicker hardness values VHN50=663.5 (566~766). Both stumpflite and geversite show solid solution and their end-members are Pt48.8Sb40.7-Bi10.5, and Pt33.7-Sb59.8Bi6.5, respectively. Although stumpflite (m.p. $1,043^{\circ}C$) and unnamed PtBi (m.p. 7$65^{\circ}C$) do not form a complete solid solution at $1,000^{\circ}C$, they are known, at $600^{\circ}C$, to form a continuous solid solution. Geversit (m.p. $1,226^{\circ}C$) also forms complete solid solution with insizwaite (m.p. $660^{\circ}C$). Unit cell dimensions of the minerals above increases with the amount of Bi substituting for Sb.

• Genomics & Informatics
• /
• 제21권1호
• /
• pp.13.1-13.8
• /
• 2023

Importance of accurate molecular diagnosis and quantification of particular disease-related pathogenic microorganisms is highlighted as an introductory step to prevent and care for diseases. In this study, we designed a primer/probe set for quantitative real-time polymerase chain reaction (qRT-PCR) targeting rgpA gene, known as the specific virulence factor of periodontitis-related pathogenic bacteria 'Porphyromonas gingivalis', and evaluated its diagnostic efficiency by detecting and quantifying relative bacterial load of P. gingivalis within saliva samples collected from clinical subjects. As a result of qRT-PCR, we confirmed that relative bacterial load of P. gingivalis was detected and quantified within all samples of positive control and periodontitis groups. On the contrary, negative results were confirmed in both negative control and healthy groups. Additionally, as a result of comparison with next-generation sequencing (NGS)-based 16S metagenome profiling data, we confirmed relative bacterial load of P. gingivalis, which was not identified on bacterial classification table created through 16S microbiome analysis, in qRT-PCR results. It showed that an approach to quantifying specific microorganisms by applying qRT-PCR method could solve microbial misclassification issues at species level of an NGS-based 16S microbiome study. In this respect, we suggest that P. gingivalis-specific primer/probe set introduced in present study has efficient applicability in various oral healthcare industries, including periodontitis-related microbial molecular diagnosis field.

• 한국가금학회지
• /
• 제43권4호
• /
• pp.229-233
• /
• 2016

본 실험은 국내 외에서 시판 중인 계란검사장비 3종인 레이저형, 탕침형 그리고 초음파형의 성능을 평가하고자 실시하였다. 실험에 사용한 신선란은 단일 계군에서 산란한 특란을 선발하여 사용하였다. 실험 1에서는 동일한 계란을 순차적으로 3종의 장비를 이용하여 분석하였다. 실험 2에서는 동일한 계란을 순차적으로 2종의 장비를 이용하여 분석하였으며, 실험 3에서는 동일한 계군에서 산란한 계란 200씩을 각각의 할란검사장비를 이용하여 난질을 분석하였다. 분석항목으로는 난중, 농후난백높이, 호우유닛 그리고 난황색을 측정하였다. 실험 1과 2에서는 장비에 따른 난중의 차이는 발견되지 않았지만, 농후난백 높이와 호우유닛의 수치가 초음파형에서 가장 높았으며, 그 다음으로 탕침형, 레이저형순으로 조사되었다. 동일한 계군에서 산란한 계란을 각각 할란검사장비를 이용하여 분석한 결과, 난중에서는 차이가 없었지만, 초음파형에서 가장 높은 난백고와 호우유닛을 나타내었다. 하지만 난황색은 레이저형에서 가장 높은 결과를 나타내었다. 결론적으로 신선란을 대상으로 조사한 할란검사장비의 난질평가 결과는 장비에 따른 차이가 있는 것으로 조사되었다. 비록 장비간의 상관계수는 높게 계산되었지만, 동일 계란에 따른 호우유닛 결과는 장비에 따른 편의(bias)와 넓은 신뢰한계를 나타내었다. 이러한 결과는 호우유닛이 높은 신선란을 대상으로 품질을 평가한다면 어떤 장비를 사용하더라도 계란의 품질 등급에는 차이가 없겠지만, 일정기간 저장되어 호우유닛이 떨어진 계란을 대상으로 품질을 평가한다면 장비에 따라서 계란 등급에 차이가 날 수 있는 것을 의미한다. 하지만 본 연구에서는 동일한 계란을 할란 후 순차적으로 측정하여, 난황과 난백 시료 이동에 따른 기계적인 오차를 고려할 수 없기 때문에 향후 이러한 방법을 보완하여 할란검사장비의 성능을 평가할 수 있는 기법의 개발이 필요하겠다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.196-201
• /
• 2004

In biometric and biomedical applications, a special transporting mechanism must be designed for the ${\mu}$TAS (micro total analysis system) to move samples and reagents through the microchannels that connect the unit procedure components in the system. An important issue for this miniaturization and integration is microfluid management technique, i.e., microfluid transportation, metering, and mixing. In view of this, this study presents an optimal fuzzy sliding-mode control (OFSMC) design based on the 8051 microprocessor and implementation of a complete microfluidic manipulated system implementation of biochip system with a pneumatic pumping actuator, a feedback-signal photodiodes and flowmeter. The new microfluid management technique successfully improved the efficiency of molecular biology reaction by increasing the velocity of the target nucleic acid molecules, which increases the effective collision into the probe molecules as the target molecules flow back and forth. Therefore, this hybridization chip was able to increase hybridization signal 6-fold and reduce non-specific target-probe binding and background noises within 30 minutes, as compared to conventional hybridization methods, which may take from 4 hours to overnight. In addition, the new technique was also used in DNA extraction. When serum existed in the fluid, the extraction efficiency of immobilized beads with solution flowing back and forth was 88-fold higher than that of free-beads.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.173-176
• /
• 2002

In this paper, we present the combined 2-D and 3-D algorithms for automatic solder paste inspection. For automatic inspection, optical system for the combined inspection and driving unit is made. One-pass run length algorithm that has fast and efficient memory space is applied to the input image fur extracting solder paste patterns. The path of probe movement is then calculated for an automatic inspection. For a fast 3-D inspection, the phase shift algorithm based on Moire interferometry is also used. In addition, algorithms used in this paper are coded by $MMX^{TM}$. A probe system is manufactured to simultaneously inspect 2-D and 3-D for 10mm$\times$10mm field of view, with resolutions of 10 $\mu\textrm{m}$for both x, y axis and 17 $\mu\textrm{m}$for z axis, and then, experiments on several PCBs are conducted. The processing times of 2-D and 3-D, excluding an image capturing, is 0.039 sec and 0.047 sec, respectively. The credible result with $\pm$ 1$\mu\textrm{m}$uncertainty can be also achieved.

• 한국정밀공학회지
• /
• 제19권3호
• /
• pp.39-45
• /
• 2002

A simple and low cost stylus profiler made of ferrite cores is developed. The devised profiler consists of a contact probe, a measuring transducer, a signal processing unit, and a motorized stage. The contact probe attached to 4-bar spring maintains sufficient stiffness to protect disturbances. An overlap-area type inductive position sensing system is selected as a measuring transducer, which has high sensitivity, repeatability and linearity. The transducer is composed of coil bundles and ferrite cores which have good electromagnetic characteristics in spite of low cost. The repeatability of the profiler with the proposed inductive sensing system is better than 50nm. Experimental results are shown that the proposed profiler can measure the line or 3D profile of an object with sub-micron features.

• 한국기계가공학회지
• /
• 제13권6호
• /
• pp.30-36
• /
• 2014

Many different cells types have been found to be highly sensitive to mechanical force imposed by their surroundings. The cellular response to external mechanical forces has very important effects on numerous biological phenomena. In spite of its importance in biological processes, the cell adhesion force remains difficult to measure quantitatively at the cellular level. In this paper, to enhance quantitative measurements of cell adhesive interactions, a new attaching system and a method in which a glass bead can be attached to an AFM cantilever was designed and fabricated, and the degree of range displacement was controlled in the system. In an experiment, the movement of the stage in the attaching system and the attaching process were measured. The effectiveness of this system was confirmed as well in the experiment. In addition, through a commercial AFM system, the spring constant of the modified AFM probe could be measured.

• Bulletin of the Korean Chemical Society
• /
• 제31권12호
• /
• pp.3707-3710
• /
• 2010

A chromo/fluorogenic $NO_2S_2$-macrocycle L functionalized with nitrobenzofurazan unit as a dual-signaling probe was synthesized and structurally characterized by single crystal X-ray analysis. In a cation-induced color change experiment, L exhibited excellent $Hg^{2+}$ ion selectivity by showing the color change from orange-red to yellow. However, this hypochromic shift by $Hg^{2+}$ was observed for the weaker coordinating anion system such as ${NO_3}^-$ and ${ClO_4}^-$ ions. The observed anion effect is due to the strong coordination of anions inhibits the bond formation between $Hg^{2+}$ and the macrocyclic tert-N atom, which is sensitive to induce the color change. In the fluorometric experiment, L showed chelate-enhanced fluorescence change effect only with $Hg^{2+}$ ion, together with a change from yellow to green emission. The sensing ability for $Hg^{2+}$ with the proposed chemosensor L is due to the stable complexation with 1:1 stoichiometry (metal-to-ligand).