• Journal of Information Technology Applications and Management
• /
• 제15권2호
• /
• pp.67-82
• /
• 2008

Risk that breed large size disaster is happening variously for cause at social. natural a management. Incidence and damage scale are trend that increase rapidly than past. In these circumstance, to keep operational continuity of organization, area, society, risk management action that establish systematic counter measure estimating and analyze occurrence possibility and expectation damage of risk is essential indispensable issue and the best countermeasure. Risk management action does by main purpose establish optimum disaster reduction countermeasure. To deduce various countermeasure, process that estimate and analyze occurrence possibility and expectation damage of risk is essential indispensable issue. Therefore, this paper studies process design that can presume risk occurrence frequency and damage scale through distribution of probability.

• Earthquakes and Structures
• /
• 제10권2호
• /
• pp.429-450
• /
• 2016

An attempt has been made to incorporate the concept of collapse safety margin into the procedures proposed in the performance-based earthquake engineering (PBEE) framework for direct earthquake loss estimation, in which the collapse probability curve obtained from incremental dynamic analysis (IDA) is mathematically characterized with the S-type fitting model. The regressive collapse probability curve is then used to identify non-collapse cases and collapse cases. With the assumed lognormal probability distribution for non-collapse damage indexes, the expected direct earthquake loss ratio is calculated from the weighted average over several damage states for non-collapse cases. Collapse safety margin is shown to be strongly related with sustained damage endurance of structures. Such endurance exhibits a strong link with expected direct earthquake loss. The results from the case study on three concrete frames indicate that increase in cross section cannot always achieve a more desirable output of collapse safety margin and less direct earthquake loss. It is a more effective way to acquire wider collapse safety margin and less direct earthquake loss through proper enhancement of reinforcement in structural components. Interestingly, total expected direct earthquake loss ratio seems to be insensitive a change in cross section. It has demonstrated a consistent correlation with collapse safety margin. The results also indicates that, if direct economic loss is seriously concerned, it is of much significance to reduce the probability of occurrence of moderate and even severe damage, as well as the probability of structural collapse.

• 대한토목학회논문집
• /
• 제33권3호
• /
• pp.1007-1015
• /
• 2013

하중 발생과정에 따른 누적피해의 선형뿐만 아니라 비선형 거동을 해석할 수 있는 추계학적 확률모형이 수립되었다. 여러 종류의 피해강도함수를 도입하여 내용년수의 파괴확률과 비선형 누적피해의 거동이 자세히 해석되었다. 특히 본 연구에서는 저항한계를 임의의 분포함수를 갖는 확률변수로 취급하여 한계상태의 불확실성을 고려하였다. 또한 피복재에 대한 피해수준을 이용하여 처음으로 추계학적 확률모형을 경사제에 적용하였다. 실험 자료와의 비교를 통해 추정된 경사제 피복재에 대해 피해강도함수를 이용하여 내용년수에 따른 파괴확률과 비선형 누적피해의 거동을 해석하였다. 마지막으로 해석 결과를 이용하여 경사제 피복재의 보수 보강 시점과 최소한의 보수 보강규모를 정량적으로 산정할 수 있는 예방적 유지관리 방법을 제시하였다.

• 한국터널지하공간학회 논문집
• /
• 제12권1호
• /
• pp.15-29
• /
• 2010

스폴링 현상은 높은 현지응력하에서 확장균열의 발달로 암반공동 주변에서 발생하는 파괴형태이다. 기존 연구에 의하면 3가지 스폴링 기준은 범위로 제시되어 있어 기준자체의 애매모호함이 상존하고 있다. 본 연구에서는 퍼지확률이론을 적용한 새로운 스폴링 발생 종합 평가모델을 제안하였고 스폴링 발생현장에 평가모델을 적용한 결과 현장관측결과와 일치하는 결과를 보였으며, 정량적으로 스폴링 발생확률을 산정할 수 있었다. 특히, 3가지 스폴링 평가인자별 상대중요도를 고려한 가중치를 적용함으로써 실제 스폴링이 관측된 현장이 스폴링이 발생하지 않는 것으로 평가되는 오류를 해결하였다. 또한, Martin 등(1999)의 손상지수에 형상계수를 도입한 수정손상지수가 포함된 스폴링 평가인자를 스폴링 발생 종합 평가모델에 적용한 결과 합리적인 스폴링 발생확률을 산정할 수 있었다.

• Earthquakes and Structures
• /
• 제27권4호
• /
• pp.303-315
• /
• 2024

This study proposes a comprehensive methodology for estimating accumulative damage of bridge structures under multiple seismic excitations, in the framework of site-specific probabilistic hazard analysis. Specifically, a typical earthquake-prone region in China is chosen to perform probabilistic seismic hazard analysis (PSHA) to find the mean annual rate (MAR) of ground motion intensity at a specific level, based on which, a mass of ground motion observations is selected to construct random earthquake sequences with various number of shocks. Then, nonlinear time history analysis is implemented on the finite element (FE) model of a RC girder bridge at the site of interest, to investigate structural responses under different earthquake sequences, and to develop predictive model for cumulative damage computation, in which, a scalar seismic intensity measure (IM) is adopted and its performance in damage prediction is discussed by an experimental column. Furthermore, a mathematic model is established to calculate occurrence probability of earthquakes with various number of shocks, based on PSHA and homogenous Poisson random process, and a modified cumulative damage indicator is proposed, accounting for probabilistic occurrence of various earthquake scenarios. At end, the applicability of the proposed methodology to main shock and aftershock scenarios is validated, and characteristics of damage accumulation under different multiple earthquake scenarios are discussed.

• 환경영향평가
• /
• 제15권6호
• /
• pp.373-383
• /
• 2006

The spatial mapping of risk is very useful data in planning for disaster preparedness. This research presents a methodology for making the landslide life risk map in the Boeun area which had considerable landslide damage following heavy rain in August, 1998. We have developed a three-stage procedure in spatial data analysis not only to estimate the probability of the occurrence of the natural hazardous events but also to evaluate the uncertainty of the estimators of that probability. The three-stage procedure consists of: (i)construction of a hazard prediction map of "future" hazardous events; (ii) validation of prediction results and estimation of the probability of occurrence for each predicted hazard level; and (iii) generation of risk maps with the introduction of human life factors representing assumed or established vulnerability levels by combining the prediction map in the first stage and the estimated probabilities in the second stage with human life data. The significance of the landslide susceptibility map was evaluated by computing a prediction rate curve. It is used that the Bayesian prediction model and the case study results (the landslide susceptibility map and prediction rate curve) can be prepared for prevention of future landslide life risk map. Data from the Bayesian model-based landslide susceptibility map and prediction ratio curves were used together with human rife data to draft future landslide life risk maps. Results reveal that individual pixels had low risks, but the total risk death toll was estimated at 3.14 people. In particular, the dangerous areas involving an estimated 1/100 people were shown to have the highest risk among all research-target areas. Three people were killed in this area when landslides occurred in 1998. Thus, this risk map can deliver factual damage situation prediction to policy decision-makers, and subsequently can be used as useful data in preventing disasters. In particular, drafting of maps on landslide risk in various steps will enable one to forecast the occurrence of disasters.

• Earthquakes and Structures
• /
• 제24권4호
• /
• pp.303-316
• /
• 2023

Rapid post-earthquake damage estimation of subway stations is particularly necessary to improve short-term crisis management and safety measures of urban subway systems after a destructive earthquake. The conventional Performance-Based Earthquake Engineering (PBEE) framework with constant earthquake occurrence rate is invalid to estimate the aftershock risk because of the time-varying rate of aftershocks and the uncertainty of mainshock-damaged state before the occurrence of aftershocks. This study presents a time-varying probabilistic seismic risk assessment framework for underground structures considering mainshock and aftershock hazards. A discrete non-omogeneous Markov process is adopted to quantify the time-varying nature of aftershock hazard and the uncertainties of structural damage states following mainshock. The time-varying seismic risk of a typical rectangular frame subway station is assessed under mainshock-only (MS) hazard and mainshock-aftershock (MSAS) hazard. The results show that the probabilities of exceeding same limit states over the service life under MSAS hazard are larger than the values under MS hazard. For the same probability of exceedance, the higher response demands are found when aftershocks are considered. As the severity of damage state for the station structure increases, the difference of the probability of exceedance increases when aftershocks are considered. PSDR=1.0% is used as the collapse prevention performance criteria for the subway station is reasonable for both the MS hazard and MSAS hazard. However, if the effect of aftershock hazard is neglected, it can significantly underestimate the response demands and the uncertainties of potential damage states for the subway station over the service life.

• 한국가스학회지
• /
• 제23권2호
• /
• pp.9-16
• /
• 2019

울산, 여주 등 산업단지의 고압매설배관에서 발생할 수 있는 굴착공사 등 타 공사로 인한 중대사고의 발생빈도를 도시가스 매설 배관과 비교하여 FTA에 의해 기초사상(Basic event)을 도출하여 제시한다. 또한 굴착빈도, 순찰주기 등 배관손상 영향 인자를 관찰 및 분석하고, 이들 인자의 중요도와 민감도를 Risk 비교분석을 통해 구해봄으로써 고압가스매설배관의 안전성 향상에 기여한다.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2002년도 추계 학술발표회 논문집
• /
• pp.330-337
• /
• 2002

The objective of the earthquake resistant design of structures is to satisfy on the one side the minimization of damage requirement under earthquakes with high probability of occurrence during the design life and on the other side the no collapse requirement under the design seismic event with low probability of occurrence. The two requirements are satisfied with the minimum strength of substructure as well as the ductile failure mechanism presented in the codes. In this study seismic performance is evaluated with two bridges which have steel box superstructures and T type, II type piers as substructures. In order to satisfy the two requirements redesign of both substructures and steel bearings are carried out.

• 국제학술발표논문집
• /
• The 9th International Conference on Construction Engineering and Project Management
• /
• pp.213-221
• /
• 2022

Defects are the risk factors in the construction process of buildings. They cause damage, delaying the construction duration. They especially cause adverse effects on the top-down construction method. This study analyzed the degree of construction delay induced by each work type, focusing on defects in the top-down method. Then, we derived construction delay induction coefficient from different work types in order by using the severity of construction delay per defect and the occurrence probability of defect; this assessment model measures the impact of defects on construction delay for each work type. Furthermore, by comparing each work type based on the defect frequency and the construction delay induction coefficient, we found work types that need to be administered attentively. We identified that plastering work was easy to overlook, requiring caution in defect management. This study provides an efficient defect management system suitable for the buildings that are built using the top-down construction method.