• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.4
• /
• pp.520-527
• /
• 2010

The kill probability of a missile depends on guidance error, warhead performance, and etc. In this paper, we analyzed the kill probability of anti-tank missile in a new approach. Under the condition that the missile hit the target, we studied the effect of angle of attack and impact angle. High impact angle increase the probability that the missile hits the upper armour which is relatively weaker, while high angle of attack at the impact instant decreases the effectiveness of the jet induced by the warhead. We proposed a way to increase the capability of penetration by analyzing the interrelation between impact angle and angle of attack.

• ETRI Journal
• /
• v.39 no.5
• /
• pp.695-706
• /
• 2017

This paper presents a caching algorithm that offers better reconstructed data quality to the requesters than a probabilistic caching scheme while maintaining comparable network performance. It decides whether an incoming data packet must be cached based on the dynamic caching probability, which is adjusted according to the priorities of content carried by the data packet, the uncertainty of content popularities, and the records of cache events in the router. The adaptation of caching probability depends on the priorities of content, the multiplication factor adaptation, and the addition factor adaptation. The multiplication factor adaptation is computed from an instantaneous cache-hit ratio, whereas the addition factor adaptation relies on a multiplication factor, popularities of requested contents, a cache-hit ratio, and a cache-miss ratio. We evaluate the performance of the caching algorithm by comparing it with previous caching schemes in network simulation. The simulation results indicate that our proposed caching algorithm surpasses previous schemes in terms of data quality and is comparable in terms of network performance.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.2
• /
• pp.21-30
• /
• 2007

A practical method to design the input shaping which generates control command is proposed in this paper, We suggest an experimental technique considering human operator's target tracking error to improve aiming accuracy which significantly affects hit probability. It is known that stabilization performance is one of the most important factors for ground combat vehicle system. In particular, stabilization error of the manual target tracking system mounted on moving vehicle directly affects hit probability. To reduce this error, we applied input command shaping method using preprocessing filtering and functional curve fitting. First of all, we construct the human operator model to consider effects of human operator on our system. Input shaping curve is divided into several regions to get rid of the above problems and to improve the system performance. At example design part, we chose three steps of functional command curve and determine the parameters of the function by the proposed design method. In order to verify the proposed design method, we carried out the experiments with real plant of a fighting vehicle.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.328-334
• /
• 2020

At the recent practice test of the Remote Controlled Munition system (for practice), nine out of 125 samples were generated. Although 7.2 % misfires occurred, the acceptance test met the defense standards. Minimizing the probability of broken fuses is essential to reducing the number of samples and improving the AQL according to the process quality. In addition, it is necessary to increase military training and ensure user safety. In the case of practical grenades, hit-type detonators are applied. Unlike the normal design, which takes a hit by strikers, a different design of a hit by pressure from a pressure generator was used. This study analyzed the detonator surface through computational fluid dynamics. The results showed that the probability of functional weakness and retraction increased with increasing slope of the detonator surface. To overcome this, design changes were made to improve the fuse crimping process and increase the detonator holder seat. A performance test with the same number of samples from the whole quantity was operated. The probability of broken fuses was 0 %. Therefore, the reliability and performance of the ammunition can be improved and is expected to contribute to the drawing and process design when developing similar ammunition.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.5
• /
• pp.2379-2397
• /
• 2017

Content distribution technology, which routes content to the cache servers, is considered as an effective method to reduce the response time of the user requests. However, due to the exponential increases of content traffic, traditional content routing methods suffer from high delay and consequent inefficient delivery. In this paper, a content selection policy is proposed, which combines the histories of cache hit and cache hit rate to collaboratively determine the content popularity. Specifically, the CGM policy promotes the probability of possible superior paths considering the storage cost and transmission cost of content network. Then, the content routing table is updated with the proportion of the distribution on the paths. Extensive simulation results show that our proposed scheme improves the content routing and outperforms existing routing schemes in terms of Internet traffic and access latency.

• Journal of Ocean Engineering and Technology
• /
• v.28 no.1
• /
• pp.69-76
• /
• 2014

Survivability assessments and vulnerability reductions are required in warship design. A warship's survivability is assessed by its susceptibility, vulnerability, and recoverability. In this paper, an integrated survivability assessment for a warship subjected to multiple hits is introduced. The methodology aims at integrating a survivability assessment into an early stage of warship design. The hull surface is idealized using typical geometries for RCS (Radar Cross Section) detection probability and susceptibility. The Vulnerability is evaluated by using the shot-line. The recoverability is estimated using a survival time analysis. This enables the variation of survivability to be assessed. Several parameters may be varied to determine their effects on the survivability. The susceptibility is assessed by the probability of detecting the radar cross section of the subject and the probability of being hit based on a probability density function. The vulnerability is assessed by the kill probability based on the vulnerable area of critical components, according to the component's layout and redundancy. Recoverability is assessed by the recovery time for damaged critical components.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.794-798
• /
• 1990

To improve gun hit probability and to correct miss distance between target and bullet. It assumes that a radar tracks both the targets and bullets fired by a gun system. This papers describes an adaptive algorithm developed for processing the large number of radar measurements. The gun-order computation is enhanced by feedback from the ballistic estimator.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.04a
• /
• pp.73-78
• /
• 2003

Ultrasonic measurement is one of important technologies in the lift-time maintenance of nuclear poler plant. Ultrasonic inspection system is consisted of the operator, equipment and procedure. The reliability of ultrasonic inspection system is affected by its ability. The performance demonstration round robin was conducted to quantify the capability of ultrasonic inspection for in-service. The small number of teams who employed procedures that met or exceeded ASME Sec. XI Code requirements detected the piping of nuclear power plant with various cracks to evaluate the capability of detection and sizing. In this paper, the statistical reliability assessment of ultrasonic nondestructive inspection data using Monte Carlo simulation is presented. The results of the probability of detection (POD) analysis using Monte Carlo simulation are compared to these of logistic probability model. In these results, Monte Carlo simulation was found to be very useful to the reliability assessment f3r the small hit/miss data sets.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.12 no.4
• /
• pp.71-79
• /
• 2016

This study proposes a performance model of a shared bus multi-processor system and analyzes the effect of input/output types on system performance and overload of shared resources. This system performance model reflects the memory reference time in relation to the effect of input/output types on shared resources and the input/output processing time in relation to the input/output processor, disk buffer, and device standby places. In addition, it demonstrates the contribution of input/output types to system performance for comprehensive analysis of system performance. As the concept of workload in the probability theory and the presented model are utilized, the result of operating and analyzing the model in various conditions of processor capability, cache miss ratio, page fault ratio, disk buffer hit ratio (input/output processor and controller), memory access time, and input/output block size. A simulation is conducted to verify the analysis result.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.6
• /
• pp.611-615
• /
• 2015

Anti-aircraft gun system is used for low-level air defense system and has more than twin guns with high firing rate in order to maximize the capability of defense. Gun's vibration and bullet's variance has a critical effect on accuracy and hit probability of weapon system such as anti-aircraft gun system with high firing rate. Typical mechanism to reduce the amount of vibration and shock during gun-fire process is very important design factor. In this paper, the suspension characteristics of the vehicle are studied for the improvement of isolating performance of gun firing system with high firing rate. Gun fire test for the vehicle is conducted and computational models using Recurdyn and Adams are created based on test results. Through this study, results of computational analysis are compared with the real test results, which includes type, location and quantity of suspension and gun mechanism are selected for anti-aircraft gun. From the result of this study, we could make basic design and consider the proper component of the system such as suspension and gun spring.