• 기술혁신연구
• /
• 제13권1호
• /
• pp.25-54
• /
• 2005

In this study, priority setting model of new promising IT industries which will be the growth engines for the Korean IT industry, was established. Based on the AHP model, priority setting of IT new promising IT industries was conducted. Firstly, the selection cases of the new promising IT industries and major priority setting methodologies including the AHP methodology, were analyzed. The AHP model was selected as the most feasible methodology for priority setting of the new IT industries, among the various priority setting methodologies. Secondly, in setting up the AHP model for prioritization of the new promising If industries, a 'goal' was established to be priority setting of the new promising IT industries, and an 'alternatives' to be 18 new promising IT industries. Then a logical and a systematic assessment criteria including 5 main criteria('Technological Innovation', 'Market Ability', 'SPin-off Effect', 'Public Benefit', 'Strategic Importance') and 14 sub-criteria, were developed for priority setting of the 18 new promising industries. Finally, with the AHP model, the substantial analysis was made to set up priority of the 18 new promising IT industries. The substantial analysis showed the following priority setting results and implications for the 18 new promising IT industries.

• 한국정보처리학회논문지
• /
• 제3권4호
• /
• pp.803-816
• /
• 1996

본 논문에서는 기존의 알고리즘들이 트랜잭션에 부여하였던 우선순의를 특정 데이 타 항목에 부여하여 접근하는 트랜잭션중 가장 높은 우선순의 트랜잭션을 먼저 수행토 록 함으로써 교착상태(deadlock)를 쉽게 예방할 수 있는 점에 착안하여 데이타 항목에 우선순위를 부여하는 데이타 우선순위에 기초한 잠금 프로토콜 (DPLP:Data-Priority Based Locking Protocol)을 제안하고, 이 알고리즘의 성능을 실시간 데이타베이스 시스템에서 기존 잠금 프로토콜의 성능과 비교분석하였다. 비교 기준으로는 트랜잭션 도착 시간차(IAT:inter arrival time) 에 따른 트랜잭션의 성공 비율(success ratio), 평균 지연(average-lateness),충돌 비율(conflict-ratio), 재시작 비율(restart-ratio) 을 채택하였다. 성능 비교의 결과는 본 논문에서 제안하는 데이타 우선순위에 기초한 잠금 프로토콜이 기존의 잠금 프로토콜들보다 우수한 성능을 보임을 확인하였다.

• 한국정보통신학회논문지
• /
• 제17권3호
• /
• pp.755-761
• /
• 2013

무선 센서 네트워크에서 다중접근제어(Medium Access Control: MAC) 프로토콜은 센서 노드들이 필요할 때만 on 상태에 머물게 함으로 에너지를 효율적으로 사용하도록 하게한다. 본 논문에서는 에너지 수확 무선 센서 네트워크에서 우선순위에 기반을 둔 에너지 효율적인 MAC 프로토콜(EEPB-MAC)을 제안한다. 제안된 EEPB-MAC은 기존의 IEEE 802.15.4의 비콘 프레임에 우선순위 비트, 전송 노드 주소, NAV 값을 가지는 필드를 추가하여 이를 통하여 우선순위 데이터 전송을 지원한다. 데이터 전송을 원하는 전송자로부터 비콘 프레임을 수신한 수신 노드는 수신된 비콘 프레임의 우선순위 비트에 기반으로 데이터를 전송할 전송자를 선택한다. 데이터의 특성에 따라 우선순위 전송을 지원할 뿐 만 아니라, 수신 노드의 잔여 에너지 레벨에 따라 전송 주기를 조절하는 등 데이터 전송에 참여하는 노드에서의 에너지 소모를 줄인다. EEPB-MAC 프로토콜은 기존에 제안된 다른 프로토콜에 비해 우선순위가 높은 데이터에 대한 전송지연을 줄이며, 각 노드에서의 에너지 소모를 개선시켰다.

• ETRI Journal
• /
• 제39권4호
• /
• pp.558-569
• /
• 2017

In this study, a non-preemptive M/G/1 queueing model of a spectrum handoff scheme for cognitive wireless networks is proposed. Because spectrum handoff gives secondary users an opportunity to carry on their transmissions, it is crucially important to determine the actions of primary users. In our queueing model, prioritized data traffic is utilized to meet the requirements of the secondary users. These users' packets are categorized into three different priority classes: urgent, real-time, and non-real time. Urgent data packets have the highest priority, while non-real time data packets have the lowest priority. Riverbed (OPNET) Modeler simulation software was used to simulate both reactive and proactive decision spectrum handoff schemes. The simulation results were consistent with the analytical results obtained under different load and traffic conditions. This study also revealed that the cumulative number of handoffs can be drastically decreased by exploiting priority classes and utilizing a decent spectrum handoff strategy, such as a reactive or proactive decision-based strategy.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.3-4
• /
• 2006

Fast IP address lookup in routers is essential to achieve packet forwarding in wire-speed. The longest prefix matching for IP address lookup is more complex than exact matching because of its dual dimensions, length and value. By thoroughly studying the current proposals for IP address lookup, we find out that the binary search could be a low-cost solution while providing high performance. Most of the existing binary search algorithms based on trie have simple data structures which can be easily implemented, but they have some problems because of empty internal nodes. The proposed algorithm is based on trie structure, but empty internal nodes are replaced by priority prefixes. The best-matching-prefix search in the proposed algorithm is more efficiently performed since search can be finished earlier when input is matched with a priority prefix. The performance evaluation results show that the constructed priority-trie has very good performance in the lookup speed and the scalability.

• 전기학회논문지
• /
• 제64권10호
• /
• pp.1493-1500
• /
• 2015

For efficient and economical train operation in low-density railway line, on-board oriented train control system, which reduces expensive wayside equipment, is being developed. In this paper, we discuss a tram signal priority strategy which enables efficient and safe train operation when the developing system is applied to train-tram railway environment. Based on the well-known transit signal priority strategies, we develop a tram signal priority algorithm and conduct simulations by using model-based systems engineering (MBSE) tool. Various considerations such as operation procedure, linkage to existing road traffic system, applicability with respect to crossroad types, and so on, are also dealt with.

• 한국통신학회논문지
• /
• 제30권9A호
• /
• pp.762-771
• /
• 2005

In this paper, an efficient Adaptive quality-of-service (QoS) traffic control scheme with priority scheduling is proposed for the multimedia traffic transmission over wireless access networks. The objective of the proposed adaptive QoS control (AQC) scheme is to realize end-to-end QoS, to be scalable without the excess signaling process, and to adapt dynamically to the network traffic state according to traffic flow characteristics. Here, the reservation scheme can be used over the wireless access network in order to get the per-flow guarantees necessary for implementation of some kinds of multimedia applications. The AQC model is based on both differentiated service model with different lier hop behaviors and priority scheduling one. It consists of several various routers, access points, and bandwidth broker and adopts the IEEE 802.1 le wireless radio technique for wireless access interface. The AQC scheme includes queue management and packet scheduler to transmit class-based packets with different per hop behaviors (PHBs). Simulation results demonstrate effectiveness of the proposed AQC scheme.

• Journal of Computing Science and Engineering
• /
• 제9권2호
• /
• pp.108-117
• /
• 2015

Interrupt handling is generally separated from process scheduling. This can lead to a scheduling anomaly and priority inversion. The processor can interrupt a higher priority process that is currently executing, in order to handle a network packet reception interruption on behalf of its intended lower priority receiver process. We propose a new network interrupt handling scheme that combines interrupt handling with process scheduling and the priority of the process. The proposed scheme employs techniques to identify the intended receiver process of an incoming packet at an earlier phase. We implement a prototype system of the proposed scheme on Linux 2.6, and our experiment results show that the prototype system supports the predictable real-time behavior of higher priority processes even when excessive traffic is sent to lower priority processes.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2009년도 동계학술발표회 논문집
• /
• pp.307-308
• /
• 2009

To reduce delay for high priority packets in the ring-based EPON, the EPON packet classifier groups services as their priorities and frames for services are dynamically framed as their priorities. Since dynamic framing for a packet priority dynamically changes assignment spaces in the maximum framing packet size as network traffics, it makes services with high priority to improve quality of services with relative low threshold time for transmitting.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전력기술부문
• /
• pp.463-465
• /
• 2003

This paper adopts the methods of dynamic programming based on priority and the objective function is to maximize the amount of priority. The Purpose of this work is to schedule the direct load control with approciate constrints. To demonstrate the effectiveness of the study, sample data is used about 54 load. And the results of sample are described in this.