• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.11a
• /
• pp.769-772
• /
• 2006

The effects of high temperature on strength, elastic modulus and strain at peak stress of concrete were experimentally investigated. The type of test was the stressed test that a preload was applied to the specimen prior to heating and the load was sustained during the heating period. In this study, the level of preload was 25% of compressive strength at room temperature. All tests were conducted at various temperatures(20,100, 200, 300, 400, 500, 600 and $700^{\circ}C$) for concretes made with W/B ratios 46% and 32%. Test results showed that on the whole, the relative values of strength and elastic modulus, and the real strain value at peak stress were not influenced by the W/B ratio.

• Journal of the Korean GEO-environmental Society
• /
• v.14 no.10
• /
• pp.17-27
• /
• 2013

This paper explores stress release induced by unloading in dry sand. A series of model tests were carried out to measure stresses developed in testing sand during loading and those released during unloading for different boundary conditions. It was found that stress in the sand increased linearly with applied load. At the onset of unloading, almost no stress release was observed. Significant stress release took place when the shear stress in the sand induced by unloading exceeded the frictional resistance and caused movement of sand particles. The initiation and the magnitude of stress release depend on the stress condition prior to unloading, the decrease of external load, and also the frictional resistance in sand. A new conceptual stress-release model was next developed based on the model test results by considering the fundamental frictional behavior of granular materials.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.871-875
• /
• 2001

Evaluation of the contribution of each pass-by noise source to the overall pass-by noise is an important issue for reduction of pass-by noise. A lead-wrapping test for analyzing pass-by noise of motorcycle is used to identify the principal noise sources of the pass-by noise in this study. Lead-wrapping test is employed and the contribution analysis is carried out. Based on the contribution analysis of each pass by noise source from the action of the prior tests, the design modifications of intake/exhaust systems were performed for reducing the pass-by noise. Finally, the pass-by noise test based on ISO362 was carried out to verify the noise reduction.

• International Journal of Reliability and Applications
• /
• v.14 no.2
• /
• pp.79-96
• /
• 2013

Exponential distribution plays a key role in engineering reliability and its applications. The exponential failure model has been studied for years. This article introduces two new preliminary test estimators for the reliability function (R(t)) in complete and censored samples from the exponential model with the use of a prior estimation (${\theta}_0$) of the mean (${\theta}$). The proposed preliminary test estimators are studied and compared numerically with the existing estimators. Computer-intensive calculations for bias and relative efficiency show that for, different values of levels of significance and for varying constants involved in the proposed estimators, the proposed estimators are far better than classical and existing estimators.

• Journal of Advanced Research in Ocean Engineering
• /
• v.2 no.1
• /
• pp.28-39
• /
• 2016

This paper provides theoretical and experimental results to verify the crashworthiness of FH32 high-strength steel for arctic marine structures against ice impact. Assuming that side-shell structures of the Korean arctic research vessel, ARAON, with ice-notation PL10, collide with sheet ice, one-third-scale test specimens with a single transverse frame are manufactured. Impact-bending tests were conducted using a rigid steel striker that mimics sheet ice. Drop height was calculated by considering the speed at which sheet ice is rammed. Prior to impact-bending tests, tensile coupon tests were conducted at various temperatures. The impact-bending tests were carried out using test specimens fully fixed to the inside bottom frame of a cold chamber. The drop-weight velocity and test specimen deformation speed were measured using a high-speed camera and digital image correlation analysis (DICA). Numerical simulations were carried out under the same conditions as the impact-bending tests. The simulation results were in agreement with the test results, and strain rate was a key factor for the accuracy of numerical simulations.

• Journal of Korean language education
• /
• v.25 no.1
• /
• pp.115-144
• /
• 2014

The purpose of this paper is to compare the two different instruction methods for Korean learners of academic purposes in learning request expression. Participants were divided into two groups, explicit and implicit group. Both groups viewed several scenes from the drama that involved native speakers interacting in different situations. The instructional treatment for the explicit group included metapragmatic information while the treatment for the implicit group did not. On the other hand, the treatment for the implicit group followed implicit techniques, which were repetition of the video presentation and a script reading activity. This study was made up of a pre-test, a post-test, and a delayed-test. The pre-test was conducted prior to the instructional treatment. The post-test was administered a day after the last instruction and the delayed-test was conducted five weeks after the treatments. Two types of tests, speaking and writing, were used in this study to examine subjects' knowledge of Korean request. The result of this research reveals that implicit treatment was more effective than explicit treatment in Korean learners' request acquisition. This results might have been due to the operationalization of the implicit condition in this study. Implicit instruction may help language learners make rules by themselves through tasks.

• Journal of the Korean Statistical Society
• /
• v.12 no.1
• /
• pp.1-9
• /
• 1983

A stress-strength model is formulated for s out of k system of identical components. We consider the estimation of system reliability from survival count data from a Bayesian viewpoint. We assume a quadratic loss and a Dirichlet prior distribution. It is shown that a Bayes sequential procedure can be established. The Bayes estimator is compared with the UMVUE obtained by Bhattacharyya and with an estimator based on Mann-Whitney statistic.

• Journal of Korean Society for Quality Management
• /
• v.25 no.1
• /
• pp.44-55
• /
• 1997

In order to determine procedures for a, pp.opriate model selection of technological growth curves, numerous time series that were representative of growth behavior were collected according to data characteristics. Three different growth curve models were fitted onto data sets in an attempt to determine which growth curve models achieved the best forecasts for types of growth data. The analysis of the results gives rise to an a, pp.oach for selecting a, pp.opriate growth curve models for a given set of data, prior to fitting the models, based on the characteristics of the goodness of fit test.

• Journal of the Korean Data and Information Science Society
• /
• v.16 no.4
• /
• pp.861-870
• /
• 2005

The Bayesian model selection procedures for the shape parameter of gamma distribution are proposed in order to test that the failure rate of gamma distribution is constant, increasing or decreasing. The encompassing intrinsic Bayes factor by Beger and Pericchi (1996) based on Jeffreys prior for shape parameter is used to investigate the usefulness of the proposed Bayesian model selection procedures via both real data and pseudo data.

• Journal of the Korean institute of surface engineering
• /
• v.30 no.5
• /
• pp.347-354
• /
• 1997

Composite plating is a method of co-depositing fine particles of metallic, non-metallic compound or polymers in the plated layer to improve material properties such as were-resistance, lubrication, or corrosion resistance. Graded Ni-Sic composite coating were produced in this research. Prior to produce Graded Ni-SiC composite coatings, effects of particle size, particle content, pH of electrolyte, temperature, current density, stirring rate on the amount of SiC deposited in the Ni layer were investigated. By manipulating current density and plating time properties of these coating were evaluated by micro-indentation hardness test.