• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.910-913
• /
• 2009

This paper examines attaching speed, detaching speed and contact time which affected in the ink transfer ratio and presents the best conditions for fabrication process of electrodes with Ag-ink using microcontact printing method. In conclusion, it shows the best printing characteristic by two conditions. One of condition is the attaching speed have to within less than 1mm/s and the detaching speed is high velocity as 1000mm/s and the contact time is taken about the minimum time when inking process. Another condition is the attaching speed have to within more than 100mm/s and the detaching speed have to within less than 1mm/s and the contact time is longer than 30second when the printing process. As using these condition and the stamp sized 5cm${\times}$5cm, it was possible for printing equally until $30{\mu}m$ of width. The printed thickness of a electrode was about 300 to 500 nm, the surface roughness was about dozens nm under 50 nm.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.142-144
• /
• 2009

We demonstrated narrow and good aspect-ratio inkjet-printed silver lines with multi-time over-printing methods. By using this strategy, narrow silver lines were obtained with 200 nm thickness and their width and gap between printed lines of uniform narrow silver lines were 30 ${\mu}m$ and 17 ${\mu}m$, respectively. It also had good conductivity, sheet resistacne of 0.36 ${\Omega}/{\square}$ and specific resistance of $8{\mu}{\Omega}{\cdot}cm$. In current stress test, narrow silver line with 30 ${\mu}m$ width was able to a current flow up to 50 mA (2.1A/$cm^2$). Using surface treatment on poly-arylate substrate with $UVO_3$, we obtained clean-edge narrow line without any edge waviness.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2014년도 추계학술대회 논문집
• /
• pp.16-16
• /
• 2014

본 논문에서는 polymer 기판 위에 direct inkjet patterning을 효율적으로 수행하기 위하여 기판 표면의 chemical bonding과 morphology를 in-line system 적용이 가능한 near atmospheric pressure plasma (N-APP)를 이용 하여 기판을 modifying 시켰다. modified substrate 위에 inkjet printing을 이용하여 metal interconnection을 하였다. 그 결과 기존 기판에서의 line width 보다 얇은 선폭을 획득 하였고 adhesion이 향상 되었다.

• 대한기계학회논문집B
• /
• 제37권9호
• /
• pp.873-877
• /
• 2013

잉크젯 기술은 가정용 프린터에서부터 제조 도구로 확대 되었다. 최근 인쇄전자 분야에서 고해상도 인쇄가 요구되고 있다. 기존의 잉크젯 인쇄 패터닝 방식을 향상 시키기 위해 전기수력학잉크젯 기술이 최근 주목을 받고 있는데 노즐 직경보다 작은 방울을 토출할 수 있고 넓은 점도 범위와 재료를 사용할 수 있기 때문이다. 본 논문에서는 미세 패터닝을 위한 EHD 프린팅 시스템이다. 요구 적출형 프린팅에 의해 다양한 패턴을 인쇄하고 벡터와 레스터 프린팅 알고리즘을 개발하였다. 내경이 $8{\mu}m$ 인 노즐을 이용하여 $7{\mu}m$ 이하의 미세 전도성 선폭을 EHD 방식을 통해 만들 수 있다.

• 한국생산제조학회지
• /
• 제25권3호
• /
• pp.217-223
• /
• 2016

In this research, a continuous roll-to-roll screen printing system was developed using a flat screen. It has a newly devised sliding mechanism of screen printing module, which can be controlled accurately in sync with a moving web, driven by a roll-to-roll tension control and web-guiding system. In addition, the real-time precision alignment module that consists of a vision camera and an $X-Y-{\theta}$ alignment stage was implemented. With this developed system, the feasibility of continuous printing with minimum pattern width below $60{\mu}m$ was verified, and an overlay of ${\pm}60{\mu}m$ between the laser-patterned reference mark and the printed mark on a 300-mm-wide film was achieved.

• 한국생산제조학회지
• /
• 제19권6호
• /
• pp.867-874
• /
• 2010

RFID printing technology has emerged recently as an important tool for leading future IT. Therefore, many manufacturers concerning on low cost and mass production of the related products pay close attention to the printing technology. In order to realize printed electronics, the technologies for fine line-width/gap printing and registration are essential work. This study proposes a precise Roll to Roll control system that is capable of tilting two posts. Two controllable tilting posts can adjust film position at traverse direction for the precision registration. A mathematical model for representing the geometric features of each posts in Roll to Roll printing system is established first. Then an operating program is built to implement the system and to control film movement. For experimental test, a hard ware system is fabricated which is consisted of two AC servo motors, two posts tilting mechanisms, several guide rolls, and so on. The test results show the proposed system can control the film position precisely at transverse direction.

• 한국레이저가공학회지
• /
• 제15권4호
• /
• pp.12-15
• /
• 2012

On behalf of the existing semiconductor process, the electronic devices to low-cost mass production to mass print the way, the research for development of roll-to-roll printing process is actively underway. This study was performed in about the research on the manufacturing technology of the printing roll used in the printing process of electronic devices. The indirect laser imprinting technology was used to create printable roll, and after coating copper on the surface of steel and thereon after coating polymer, after removing the polymer on the surface of roll, the printable roll was made. The laser system and roll feeder system were constructed and control program was developed. We has found the optimal conditions to perform laser patterning experiments using a system developed and We can make the minimum line width of 18 ${\mu}m$.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2011년도 춘계학술발표대회 논문집
• /
• pp.116-120
• /
• 2011

In this paper, we studied the optimization of the screen pringting method for crystalline silicon solar cell fabrication. The 156 * 156 mm2 p-type silicon wafers with $200{\mu}m$ thickness and $0.5-3{\Omega}cm$ resistivity were used after texturing, doping, and passivation. Screen printing method is a common way to make the c-Si solar cell with low-cost and high-efficiency. We studied the optimized condition for screen printing with crystalline silicon solar cell as changing the printing direction (finger line or bus bar), finger width, and mesh angle. As a result, the screen printing with finger line direction showed higher finger height and better conversion efficiency, compared with one with bus bar direction. The experiments with various finger widths and mesh angles were also carried out. The characteristics of solar cells was obtained by measuring light current-voltage, optical microscope and electroluminescence.

• 한국정밀공학회지
• /
• 제31권6호
• /
• pp.497-504
• /
• 2014

The digital signage display is actively researched as the next generation of large FPD. To commercialize those digital signage display, the manufacturing cost must be downed with printing method instead of conventional photolithography. Here, we demonstrate a reverse offset printed TFT electrodes for the digital signage display. For the fabricated source/drain and gate electrode, we used Ag ink, silicone blanket, Clich$\acute{e}$ and reverse offset printer. We printed uniform TFT electrode patterns with narrow line width(10 ${\mu}m$ range) and thin thickness(nm range). In the end the printing source/drain and gate electrode are successfully achieved by optimization of experimental conditions such as Clich$\acute{e}$ surface treatment, ink coating process, delay time, off/set process and curing temperature. Also, we checked that the printing align accuracy was within 5 ${\mu}m$.

• 산업경영시스템학회지
• /
• 제45권3호
• /
• pp.66-77
• /
• 2022

Digitization and automation technologies have rapidly maximized productivity and efficiency in all industries over the past few decades. Construction automation technology has either stagnated over the same period or has not kept pace with overall economic productivity. According to the research studies up to now, the output of concrete structures using coarse aggregates (8mm or more) is very limited due to the limitations of equipment and materials. In this study, information on the development process of 3DCP equipment that can print concrete structures with the printing width (100 mm or more) and printing thickness (30 mm or more) using a 3DCP material mixed with coarse aggregate (8 mm or more) is provided. To verify the performance of the developed 3DCP equipment, experimental data are provided on output variables, the number of layers, and the inter-layer printing time interval. The evaluation and verification data of various mechanical properties (compressive and splitting tensile strength) of printed materials using coarse aggregates are provided.