• 보존과학연구
• /
• 통권20호
• /
• pp.21-47
• /
• 1999

According to damage of papers by the chemical cause, papers become to acidify. Among the 3 kinds of method measuring the acidity of paper, one was nondestructive method measuring the surface of the paper by flat type electrode and the others were destructive methods measuring directly by cold water extract method and hot water extract method. In case of the cellulolytic cultural properties, the latter methods were not applied because those methods must bedissociated papers. To measure the paper acidity nondestructively, we investigated the correlation of the nondestructive method and the destructive methods. The conclusions are as follows. 1) In the relationship of the cold water extract method and the hot water extract method, It was indicated that the pH measured by the hot water extract method was high quality printing paper 0.08, rough printing paper 0.13, and Korean paper 0.29 higher than that by the cold water extract method.2) In the relationship of the cold water extract method and the surface measurement method, It showed that the pH value measured by the cold water extract method was high quality printing paper 1.86, rough printing paper 0.80,and Korean paper 0.58 higher than value that by the surface measurement.3) In the relationship of the hot water extract method and the surface measurement method, It showed that the pH value measured by the hot ABSTRACT water extract method was high quality printing paper 1.78, rough printing paper 0.66, and Korean paper 0.29 higher than that by the surface measurement. From the above-mentioned results, the pH value measured by the surface measurement was need to high about 1.78∼1.86 in high quality printing paper, 0.66-0.80 in rough printing paper, and 0.29∼0.58 in Korean paper and the surface measurement with flat type electrode was very available to measure the acidity of Korean papers actually.

• 보존과학연구
• /
• 통권20호
• /
• pp.49-64
• /
• 1999

According to damage of papers by the chemical cause, papers become to acidify. Among the 3 kinds of method measuring the acidity of paper, one was nondestructive method measuring the surface of the paper by flat type electrode and the others were destructive methods measuring directly by cold water extract method and hot water extract method. In case of the cellulolytic cultural properties, the latter methods were not applied because those methods must bedissociated papers. To measure the paper acidity nondestructively, we investigated the correlation of the nondestructive method and the destructive methods. The conclusions are as follows. 1) In the relationship of the cold water extract method and the hot water extract method, It was indicated that the pH measured by the hot water extract method was high quality printing paper 0.08, rough printing paper 0.13, and Korean paper 0.29 higher than that by the cold water extract method.2) In the relationship of the cold water extract method and the surface measurement method, It showed that the pH value measured by the cold water extract method was high quality printing paper 1.86, rough printing paper 0.80,and Korean paper 0.58 higher than value that by the surface measurement.3) In the relationship of the hot water extract method and the surface measurement method, It showed that the pH value measured by the hot ABSTRACT water extract method was high quality printing paper 1.78, rough printing paper 0.66, and Korean paper 0.29 higher than that by the surface measurement. From the above-mentioned results, the pH value measured by the surface measurement was need to high about 1.78∼1.86 in high quality printing paper, 0.66-0.80 in rough printing paper, and 0.29∼0.58 in Korean paper and the surface measurement with flat type electrode was very available to measure the acidity of Korean papers actually.

• 보존과학회지
• /
• 제37권3호
• /
• pp.289-301
• /
• 2021

고문헌 조사에서 목판 인쇄된 것인지 금속활자로 인쇄된 것인지를 판별해야 하는 경우가 있다. 우리나라는 물론이고 세계적으로 금속활자의 발명과 활용시기가 어떻게 판정되느냐에 따라 인쇄의 역사가 바뀔 수 있기 때문이다. 목판본과 금속활자본의 판정에는 다양한 정보가 활용되고 있으나 간기(刊記)를 비롯한 인쇄 배경에 관한 정보가 없는 경우에는 인쇄된 문서의 글자, 광곽, 먹의 종류, 먹의 제작시대, 한지의 제작시기 정보를 분석하여 고문서의 제작시기와 인출(印出)방법에 관한 판정을 하게 된다. 이러한 정보가 체계적으로 자료화되어 있지 않아 연구자의 경험과 감각에 의한 판단에 의지할 수밖에 없는 상황이다. 본 연구에서는 완판본(完板本) 심청전 복각 목판을 이용하여 목판본의 인출 특성을 실험적으로 조사하였다. 목판본 인출 시에 나타나는 다양한 현상과 특징을 자료화하여 고문헌의 인출방법을 판정하는 데 참고할 수 있도록 하였다. 간기가 없는 목판 고소설의 경우 목판의 마모정도에 따라서 인출시기의 전후관계 추정에도 참고자료로 활용할 수 있을 것이다.

• 한국의상디자인학회지
• /
• 제12권2호
• /
• pp.67-73
• /
• 2010

Whole process of textile printing is made by computer and it remarkably improves environment problem. This digital textile printing is becoming next step environment friendly textile printing method. But, still now range of textile possible for digital textile printing is limited, and also color analysis according to fiber types is not completed. The ink printed on the fabrics through DTP printer can be absorbed and fixed into textile without any blots by pre-treatment using suitable media solution for fabrics types. The chemical formulation of media solution used in the pre-treatment process varies according to the types of textiles and inks for DTP products. First, I studied reference books or articles about color analysis of digital textile printing. Second, I recorded pre-process, printing, post-process and coloring of silk, wool, nylon at same condition. After that, I analyzed $L^*\;a^*\;b^*$, Total K/S, ${\Delta}E$ and studied color intensity and coloring. According to this study, I suggested particular textile special for coloring and manual for affective coloring control. It showed that the performance of the digital printing on the Silk, Wool and Nylon blend fabrics treated by the media solution developed in this study was better than the one treated by the previous media solution for each single inks.

• 한국의상디자인학회지
• /
• 제19권2호
• /
• pp.39-48
• /
• 2017

Transfer printing is a method to combine printing and dyeing technology by the use of sublimation. It is an environmentally-friendly printing method that saves costs, reduces the production processes by the omission of the washing process, and saves time by maintaining quality. Due to the development of transfer printing, a high value added printing technology is available now but color fastness to sublimation of the printing products is still low since there are few dyes that have an affinity to the fabrics and the application technology is still inadequate. Specially, in case of high concentration black dyes, eco-label type black dyes, which is a substitution for general dispersal dyes, have been developed while general dispersal black dyes are still used, creating issues such as color differences on the surface and back side of the fabrics and contamination by friction after transfer printing. There are also some restricted substances such as allergens. To address these issues, high concentration black dyes and application technology that are environmentally-friendly and that have over 16 K/S through the use of single dyes with excellent color fastness, fixation ability, and similar melting temperature were developed for this study.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.83-84
• /
• 2018

3D printing technology can be applied to various industries, and is trapped by major technologies that change existing manufacturing processes. 3D printing materials must satisfy designability, economy and productivity, and building materials are required to have strength and economy secured technology. 3D printing technology of construction field can be divided into structural materials and internal and external materials, and is mainly done by extruding and adapting. Particularly when it is applied as an exterior materials, it is mainly applied to an unstructured exterior materials and high accuracy is required. The exterior materials can be used as a cement composite materials, it is suitable also for a lamination type, and the role of a cement base bonding material is important. In this research, we developed a cementitious base binder applicable as a 3D printing exterior materials, confirmed density and strength characteristics for application as an exterior materials, a flame retardancy test for improving the fire resistance of buildings and confirmed its possibility.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 춘계 학술논문 발표대회
• /
• pp.116-117
• /
• 2019

3D printing technology can be applied to various industries, and is trapped by major technologies that change existing manufacturing processes. 3D printing materials must satisfy designability, economy and productivity, and building materials are required to have strength and economy secured technology. 3D printing technology of construction field can be divided into structural materials and internal and external materials, and is mainly done by extruding and adapting. Particularly when it is applied as an exterior materials, it is mainly applied to an unstructured exterior materials and high accuracy is required. The exterior materials can be used as a cement composite materials, it is suitable also for a lamination type, and the role of a cement base composite material is important. In this research, we developed a cementitious base binder applicable as a 3D printing exterior materials, confirmed high temperature strength characteristics for application as an exterior materials of buildings and confirmed its possibility.

• 한국기계가공학회지
• /
• 제20권2호
• /
• pp.38-44
• /
• 2021

To cater to the transition from single-color to multicolor/multi-material printing, this paper proposes a cartridge-replacing type multi-nozzle Fused Depositon Modeling(FDM) three-dimensional (3D) printer. In the test printing run, tool change failure/wobble/layer shift occurred. It was confirmed that improper support was the cause of this tool change failure. As a solution, spline and electromagnetic cartridges were designed. Wobble was caused by machine vibration and the motor stepping out. To minimize wobble, an additional Z-axis was installed, and the four-point bed leveling method was used instead of the three-point bed leveling method. The occurrence of layer shift was ascribed to the eccentricity of the Z-axis lead screw. Therefore, slit coupler was replaced with an Oldham type. In addition to the mechanical supplementation, the control environment was integrated to prevent accidents and signal errors due to wire connections. Before the final test printing run, a rectifier circuit was added to the motor to secure precise control stability. The final test printing run confirmed that the wobble/layer shift phenomenon was minimized, and the maximum error between layers was reduced to 0.05.

• 공학교육연구
• /
• 제24권3호
• /
• pp.42-49
• /
• 2021

This paper deals with the development and application of a 3D printing education program implemented to cultivate creative fusion-type talents required by the 4th Industrial Revolution. Specifically, the entire process developed by applying the ADDIE program development model, from 3D modeling to post-processing of printed materials, was performed individually and for each team for about 200 second-year college students for two weeks. Through this program, students develop the basic ability to apply 3D printing to the learning curriculum, the ability to solve problems through cooperative interactions between team members, and convergence thinking ability by collaborating within the team by students from various major fields. They are proved by analyzing an education satisfaction survey conducted after application of the program. In conclusion, the program of this paper presents a methodology for effective 3D printing education in universities.

• 한국인쇄학회지
• /
• 제22권2호
• /
• pp.199-211
• /
• 2004

The drying speed of gravure ink are very fast because of evaporation drying type. The gravure ink are fitly selected variety resin and solvent for a wide range printing are adopted. Moreover, after-manufacture handling is necessary to various purposes. Though composition of gravure ink are same those of another printing ink, the viscosity of it are vary low compare with another printing inks. As property of variety printed matters, improvement of performance of printing layer and suitable after-manufacture handling, the more research of gravure ink are to be continue for development of printing technology. Generally, the gravure ink are made up resin, pigment, solvent and additive. Especially solvent are fitly selected for solution of resin, viscosity, and drying speed. Furthermore, it tis care of bad smell of remaining resin, poison and danger of fire of it. Because of the prevention of air pollution as restriction deflation of solvent, custody of dangerous object and improvement of work environment as labor safety hygiene and fire-low, the environment restriction of printing business become strict. This study has purpose of development of gravure ink of involved 30% below of alcohol is used for PVC film printing.