• Journal of Korea Multimedia Society
• /
• v.20 no.12
• /
• pp.1951-1959
• /
• 2017

Due to the fact that 3D printing is applied to many areas of life, 3D printing models are often used illegally without any permission from the original providers. This paper presents a novel watermarking algorithm for the copyright protection and ownership identification for 3D printing based on the radius curvature of 3D triangle. 3D triangles are extracted and classified into groups based on radius curvature by the clustering algorithm, and then the mean radius curvature of each group will be computed for watermark embedding. The watermark data is embedded to the groups of 3D triangle by changing the mean radius curvature of each group. In each group, we select a 3D triangle which has the nearest radius curvature with the changed mean radius curvature. Finally, we change the vertices of the selected facet according to the changed radius curvature has been embedded watermark. In experiments, the distance error between the original 3D printing model and the watermarked 3D printing model is approximate zero, and the Bit Error Rate is also very low. From experimental results, we verify that the proposed algorithm is invisible and robustness with geometric attacks rotation, scaling and translation.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.193-194
• /
• 2007

In this paper we present work done by Kodak Graphic-Communications-Group and our partners demonstrating applications where laser direct imaging could replace photolithography in display manufacturing. Such applications range from direct manufacturing (e.g. LCD color-filters) to producing “masters” where manufacturing is done by traditional printing methods (e.g. flexography, Gravure-printing).

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.8
• /
• pp.737-742
• /
• 2014

This paper reports a customized silver ink and its inkjet printing process on a cellulose electro-active paper (EAPap). To synthesize a silver ink, silver nanoparticle is synthesized from silver nitrate, polyvinylpyrrolidone and ethylene glycol, followed by adding a viscosifier, hydroxyethyl-cellulose solution, and a surfactant, diethylene glycol. The silver ink is used in an inkjet printer (Fujifilm Dimatix DMP-2800 series) to print silver electrodes on cellulose EAPap. After printing, the electrodes are heat treated at $200^{\circ}C$. The sintered electrodes show that the thickness of the electrodes linearly increases as the number of printing layers increases. The electrical resistivity of the printed electrodes is $23.5{\mu}{\Omega}-cm$. This customized ink can be used in inkjet printer to print complex electrode patterns on cellulose EAPap to fabricate flexible smart actuators, flexible electronics and sensors.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.3
• /
• pp.41-48
• /
• 2012

Materials used for the inks in the printing industry is an important material following the paper. The composition of the ink is pigment and organic solvents. However, Ink is used in a variety of chemicals, they are classified as non-green. Therefore, rosin-modified phenolics manufactured by the reaction of phenol and formaldehyde can take the place of eco-phenol free resin and by experiment density, gloss, trapping, contrast and dot gain of printing has been studied as printability. The result of study can support that the properties of printing using eco-phenol free resin such as density, gloss, contrast and trapping is similar to existing ink. In the part of dot gain, the result is excellent. So we were thought to be able to improve some characteristics such as dispersion of black ink, that will be possible for the field applicability.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.4
• /
• pp.21-26
• /
• 2013

The effect of esterified starch as surface sizing agent for inkjet printing paper has been evaluated and compared with oxidized starch. Also the influence of various additives including cationic poly-DADMAC, stearic acrylic copolymer, calcium chloride, and GCC was examined. Results showed that starch ester gave higher ink density than oxidized starch. Addition of poly-DADMAC improved water fastness. In general, low molecular weight poly-DADMAC performed better than high molecular weight one, and it was attributed to the fact that it gave more uniform film forming characteristics in surface sizing. Use of styrene acrylic acid copolymer increased hydrophobicity of the paper surface, but it did not increase the ink density. Use of GCC and calcium chloride had only marginal effect on printing quality.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.28 no.2
• /
• pp.69-85
• /
• 2010

Currently, environmental contaminants that can cause Aromatic types of hydrocarbons, less than 1% made of Aromatic Free kind of used products, soybean oil products with linseed oil with the products, rice products using a wide range of environmentally ecological ink since 2000 is released quickly. All materials used in printed material, if the green is the best way to print the composite materials in industrial applications, because each process on the print quality and productivity, there can be many differences in this experiment because it accounts for a large proportion in the print general ink in the ink section and the International color standards(ISO2846-1:2006) certified ecological ink were compared. Therefore, in this paper has the ink released from the same company, each common general ink and ecological ink in the same condition which results were focused on whether the emerging international color standard(ISO 2846-1:2006) recognized for environmentally ecological ink printed color reproduction of the actual offset(color reproduction) how conformity to ISO 12647-2 standard color on the basis of the offset would check Color Reproduction. Based on the results of the experiments of this study, given the ecological ink coated paper, uncoated paper both color difference and the gamut of the ISO 12647-2 standard is suitable for ecological ink, the ink's color gamut reproduction, even more than existing international standards, there is no confirmed that the correct color reproduction possible. Using environmentally ecological ink industries is expected to respond to environmental policy.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.26 no.2
• /
• pp.1-13
• /
• 2008

Printed mottle of coated paper is one of the most common phenomenon and the most difficult problem in offset printing. Offset printing is processed mainly processed by the attractive properties between water and oil, so all inks for off-printing must work with dampening solution(water). It may cause the emulsion on the printing nip from the printing pressure. This study aimed to investigate the effect of emulsified inks on print mottle from emulsified cyan ink by force with each different IP A contents. We measured the print mottle by densitometer and image analysis method. The emulsified inks also give effect to now properties of inks and it caused more ink transfer rate, however, it caused low density of inks. Moreover the emulsified inks were spreaded to around of dots and cause the thinning density on the non-printing area like print mottle. The results showed that the emulsified inks also cause scumming on the printing result with little mistake of adjusting dampening solution and mostly decreasing dot reproduction. So we could find out the obvious effect of emulsified inks to print mottle.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.34 no.1
• /
• pp.7-11
• /
• 2002

The print quality of a ink jet printer is generally affected by three major components of the printing process: printer, ink formulation, and paper. The result of this study indicated that the surface sized paper with oxidized starch and cationic starch differed ink jet print quality in terms of ink spread and black optical density of the print image. Paper properties, like air permeability and siting degree, which may influence the ink jet printing were also measured. It was found that black print quality was controlled by starch level and ionic charge on the paper surface. Cationic surface sizing starch improved black ink jet print quality.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.6
• /
• pp.142-148
• /
• 2015

3D printing technology is a promising technique for fabricating complex 3D architectures based on the CAD/CAM system, and it has been extensively investigated to manufacture structures in the fields of mechanical engineering, space technology, automobiles, and biomedical and electrical applications. Recent advances in the 3D printing of soft structures have received attention for the application of the construction of flexible sensors of soft robotics or the recreation of tissue/organ-specific microenvironments. In this review paper, we would like to focus on delivering state-of-the-art fabrication of soft structures with 3D printing technology and its various applications.

• Textile Coloration and Finishing
• /
• v.18 no.5 s.90
• /
• pp.61-71
• /
• 2006

This paper addresses the factors hindering the image quality of lines in inkjet printed on polyester fabric as printing media. Lines were printed onto different types of polyester fabrics in warp and filling directions. Line image quality including line width, edge blurriness, and edge raggedness was assessed. The effect of capillary wicking on line image quality of printed spun polyester fabric is discussed. The factors on the image quality include printing position(top of the yam or between the yarn), printing direction(warp or filling), yarn structures(filament or spun), thread size(yam or fiber), finishing, and ink properties(evaporation rate). More than 30% differences in image quality results were observed by changing the printing location on the spun polyester fabric. The best results of the image quality were obtained with the printed plain and spun polyester fabrics. The fiber sizes may affect capillary size; therefore, the image quality can be dissimilar. Types of finishing materials and inks greatly improve the line image quality on spun polyester fabrics.