• Transactions of the KSME C: Technology and Education
• /
• v.1 no.1
• /
• pp.21-26
• /
• 2013

In this paper, we introduced various 3D printing technology and it's application on tissue engineering and regenerative medicine. Using the 3D printing technology, Korea Institute of Machinery and Materials (KIMM) has developed 3D bio-printing system. Various 3D tissue engineered scaffolds have been fabricated by the 3D bio-printing system. Cell printing system has been also developed and it is the fundamental technology for organ regeneration in tissue engineering and regenerative medicine.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.10
• /
• pp.1146-1152
• /
• 2011

Ink transfer process is very important to determine quality of printed pattern, therefore its mechanism should be understood to control printing quality. Although there have been many attempts to understand ink transfer mechanism by numerical simulation and experimental studies, their model was too much simple to model realistic printing process and our understanding is not enough yet. In this paper we designed ink transfer visualization system to present flow visualization of ink transfer process for gravure offset printing. We considered rotational effect of blanket roll which is related with printing speed and used non-Newtonian fluid as working fluid such as Ag paste. For printing unit, cantilever-type blanket roll is used for convenient visualization of ink transfer. Serial images were captured continuously by using high-speed CMOS camera and long range microscope. We investigated the effects of various design parameters such as printing speed and pattern angle on the ink transfer process. We found more stretched ink filament for non-Newtonian fluid than Newtonian fluid. As increasing printing speed, length of stretched ink filament and height of break-up point are also increased. We also compared ink transfer process between CD and MD pattern and its relationship with ink transfer mechanism.

• Journal of the Korean Society for Library and Information Science
• /
• v.29
• /
• pp.345-382
• /
• 1995

The type printing of first Ch'ing dynasty term in China is worthy to be studied because the type printing during that period included metal type, wood type, and clay type as well as the development phase was similar to Chosun dynasty culturally and technologically. This paper studied typography during the first Ch'ing dynasty term, including Shunzhi(1662-1722), Yongaheng(1723-1735), Qianlong(1736-1795), Jiaqing(1796­1820) period. The main results of the study is as follows. 1. The main body of type printing was bookstore, lecture-hall, and individual as well as the royal court that is the central government. 2. The content of type edition covers classics, history, philosophy, and literary works. Specifically, even though Wuyingdienjuzhenban series is excluded, the content includs study of the classics, class of the history, class of the philosophy, literature works that include collection works and novel and government official bulletin. 3. The printing technique of bronze type was very popular In Beijing. Jiangsu, and Taiwan. It's scale and production technique was more elaborate than in Ming dynasty. 4. Wood type was very popular in Beijing, Jiangsu, Zhejiang, Anhui, Sichuan, and Fujian. In addition to wood type, chinese ware type was applied to book printing in Shandong. However, most of them were wood type and they were used after Qianlong period. 5. The production technique of type was skilled enough to present the fine view of a style of type. The typesetting technique was improved as much as woodblock printing. With regard to the making technology of Chinese ink, the light and darkness of chinese ink was not even sometimes. But, the technology was improved significantly when comparing with the failure experience of printing that chinese ink was not developed in early type invention. 6. In case that the book was printed in bookstore with the intention of profit and the number of book was large, the proofreading attitude was rough. However, overally, it was made correction carefully applying the various methods of proofreading. 7. The support of government made a great contribution in the area of all printing technology, including production, typesetting, and brushing of type.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.6
• /
• pp.53-60
• /
• 2018

In this paper, the effect of different 3D printing parameters including laminated angle and annealing temperature is observed their effect on FDM conductive 3D printing. In FDM 3D printing, a conductive filament is heated quickly, extruded, and then cooled rapidly. FDM 3D Print conductive filament is a poor heat conductor, it heats and cools unevenly causing the rapid heating and cooling to create internal stress. when the printed conductive specimens this internal stress can be increase electrical resistance and decrease electrical conductivity. Therefore, This experiment would like to use annealing to remove internal stress and increase electrical conductivity. The result of experiment when 3D printing conductive specimen be oven cooling of annealing temperature $120^{\circ}C$ electrical resistance appeared decrease than before annealing. So We have found that 3D printing annealing removes internal stresses and increases the electrical conductivity of printed specimens. These results are very useful for making conductive 3D printing electronic circuit, sensor ect...with electrical conductance suitable for the application.

• Journal of Conservation Science
• /
• v.37 no.3
• /
• pp.289-301
• /
• 2021

When investigating old, printed documents, determining whether a work is printed on a woodblock or using a movable metal type is crucial. It is because the history of printing in Korea and across the world relies on determining the relevant printing invention used and the time of use of the movable metal type. Deciphering details from woodblock and metal prints requires various kinds of information regarding the imprint and the work's printing background, such as information on the characters in the printed document, the outline of the pages, the type of ink used, the production period of the ink, and the production period of the Korean paper. Analyzing such information can generally reveal the production period and the methods used on the old document. However, as such information is not documented systematically, relying on the researcher's judgment based on their experience and perception becomes inevitable. This study conducted an experimental investigation of the printing characteristics of woodblock prints using a replicated woodblock of the Wanpanbon edition of the Shimcheongjeon. Subsequently, the various phenomena and characteristics appearing on the woodblock prints were documented for future reference to determine the printing method of old documents. Finally, woodblock novels without an imprint may be used as a reference to estimate the printing dates by determining the degree of wear on the woodblock.

• Clean Technology
• /
• v.26 no.2
• /
• pp.109-115
• /
• 2020

Over the last 3 years, the global food 3D printing market has grown at an average annual rate of 31.5% and has shown an industry size that reached about U$ 9.46 billion. Food 3D printing technology has the advantage of being utilizable in diverse ranges because it enables free design of existing foods so that foods can be produced according to individuals' tastes and purposes. Many countries around the world are producing food 3D printers to release trial products such as foods employing the advantages of food 3D printing. They are also attempting to apply food 3D printing in various fields such as combat rations, space rations, restaurants, liquid foods, foods for the elderly, diets for patients, and baby foods. Whereas the 3D printing market, which has a high growth potential and is expected to continue to expand in size, is highly likely to become a blue ocean, not only is food 3D printing technology small in South Korea, but also the overall ratio of 3D printing utilization and the scale of the relevant industry are small. This is attributable to the fact that South Korea has problems such as insufficient institutionalization compared to developed countries and delays in the development of standardized domestic materials. Therefore, this paper is intended to inform the necessity of food 3D printing and describe food 3D printing technology and food 3D materials in order to obtain the additional effect of vitalizing the South Korean food 3D printing market.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.28 no.1
• /
• pp.51-63
• /
• 2010

Ink-jet is part of the non impact printing that shooting the ink drop from the nozzle to paper. It is very silence and express good color. There are two types of printing that continuous and drop on demand. But drop on demand process is becoming the mainstream. these days, LCD, PDP is passed more than semiconductor industry. And we expect organic EL, FED as a next display. But product equipment, main component and technology have a gap between an advanced country and us nevertheless physical development. Expecially, previous process part is depended on imports. Ink-jet printing technology that there isn't complicated photo lithography process is attracted, so ink-jet printing resolution is more embossed. But there were not many of ink-jet resolution thesis but ink-jet head or nozzle. Because, to out of the ink from the nozzle is unseeable and hard to experiment. Therefore this thesis was experimented and simulated how can ink-jet printer improved resolution by flow-3d simulation package program.

• Journal of Korean Institute of Industrial Engineers
• /
• v.41 no.3
• /
• pp.253-258
• /
• 2015

The 3D printing is any of various processes for making a three dimensional object of almost any shape from a 3D model. Recently, a rapidly expanding hobbyist and home-use market has become established with the inauguration of the open-source RepRap and Fab@Home projects. However, this causes problems regarding copyright protection and usage of illegal 3D data. In this paper, we developed a 3D printing open-market system, which guarantees copyright protection using the remote 3D printing without direct distribution of 3D design data. Because most of the home-use 3D printers are FFF (Fused Filament Fabrication) based on NC code system, open-market system uses FFF 3D printers. Also, open-market system inspects the uploaded 3D model data, so the system can prevent distribution of illegal model data such as weapons, etc.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.57-60
• /
• 2009

The conductive coating method was used for a various industrial fields. For example, Sputtering process is using to a coat of ITO layer in LCD or OLED panel manufacture process and fabricate a base layer of substrate of an electric printing device. However, conventional coating process (beam sputtering, spin coating etc.) has a problems in the industrial manufacturing process. These processes have a very high cost and critical manufacturing environment as a vacuum process. Recently, many researchers were proposed a various printing process instead of conventional coating process. In this paper, we propose an ESD printing process in ITO coating layer and apply to fabricate a conductive coating film. Ours transparent electrode had a surface resistance of about $66{\Omega}/{\square}$ and transparent of 74% in the wavelength of 500nm. This transparent electrode manufacturing process will be applied to Roll-to-Roll process. In addition, we developed roll printing process system for the next generation flexible solar cell.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.3
• /
• pp.21-26
• /
• 2015

Many 3D printing technologies are being used in various industries, and their demands for well-educated engineers are increasing. Moreover, novel technologies are being developed to overcome the limits of existing 3D printing technologies. In this regard, adequate education and a related curriculum especially in the Mechanical Engineering field, which is the basis of the industry, is essential. In this paper, the development of the 3D printing curriculum and its assessment in Mechanical Engineering education are proposed. The education program consisted of lectures and practice. It consisted of major 3D printing technologies, such as SLA, FDM, SLS, LOM, and Polyjet. Moreover, post-processing, room temperature vulcanizing (RTV), and coloring were also taught. The effectiveness of the proposed education program was assessed by the questionnaire survey, and the results were analyzed. Areas of improvement were deduced from the survey results.