• Journal of the Korean Graphic Arts Communication Society
• /
• v.21 no.2
• /
• pp.11-20
• /
• 2003

In Flexo printing machine, it's operated with combination of blanket cylinder and cylinder. The blanket cylinder has some number of grooves to attach the blanket on surface. In case of operating the printing machine, it has generate mechanical noise when the two cylinders encounter with the grooves. So, in this study, we developed a mechanical noise control algorithm of printing in servo control system. Then we have reduced the mechanical noise with control of servo actuator.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.38 no.1 s.113
• /
• pp.27-33
• /
• 2006

Newsprint is quantitatively the most important printing paper. The demands for its printability are continuously increasing. It is well known that the relationship between the physically tested paper properties and newspaper printability is unsatisfactory. In order to improve the printing quality of Korean newsprint, the printability coefficients such as maximum ink requirement(Ymax), print through were investigated. Kinds of newspapers and black printing ink were tested by IGT printability tester. Experiment condition of IGT printability tester was 14 steps between $0.2{\sim}2.8g/m^2$ of ink requirement, printing pressure was 200 N and printing velocity was 1 m/sec. The properties of newspaper samples (basis weight, bulk density, roughness, smoothness, porosity, i. e.) were examined in accordance with KS and TAPPI standard testing methods. The result of this study are respected for usefulness printing quality management of Korean newsprint.

• Textile Coloration and Finishing
• /
• v.19 no.4
• /
• pp.1-9
• /
• 2007

In recent years, the application of digital textile printing has increased. The benefits of using this method include the ease of sampling and the production of printed textiles. However, the production process of digital textile printing differs from that of conventional printing. For successful digital textile printing by ink-jet technology, the pretreatment of fabrics is very important in order to overcome the following problems. Low viscosity ink can spread easily on the textile surface leading to poor resolution. As a result, the combination of ink and pretreatment chemicals is still impractical and consequently most fabrics used in digital textile printing will require a pre treated coating in order to prevent the ink colours from bleeding on the fabric. Research presented in this paper shows some preliminary attempts to establish the relationship between the pre treatment and the digital textile printing quality. Various cotton fabrics were treated with pre treatment agents including ingredients like thickener, alkali and humectant, and then ink spread effect and colour yield of printed fabrics by reactive ink were analysed by using an optical microscope and K/S value. The results show that digital textile printing quality on cotton fabrics can be optimized with appropriate pre treatments.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.21 no.1
• /
• pp.59-70
• /
• 2003

Digital technology is recognised as a generalized technology in the media industry, therefore there is an opinion which shows that the markets for its old media will be replaced by new media. However, some researchers have confirmed that the printed media which has a long historical background will be continuously selected by the audiences. As going through the historical background of the printed media, it has been challenged by the freshly created media. And traditional printed media does not disappear as the challenge of new media. As the challenge of new media, the printed media will show the new future of the printed media itself and its market as well by the transformations through the acceptance and merging the new technologies.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.428-430
• /
• 2009

We fabricated flexible OTFT-backplanes with combining printing technique and conventional photolithography process for the electrophoretic display(EPD). The active area size of backplane was 6" in diagonal direction and consisted of $192{\times}150$ pixels, containing 1 OTFT employed bottom contact structure and 1 capacitance in each pixel.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.28 no.1
• /
• pp.43-50
• /
• 2010

The 200mesh screen was tensioned and fixed on a frame. When applied tension to 5N and 10N per unit area, a side length of opening of the screen was 163.223${\mu}m$ and 168.224${\mu}m$, respective. But side length not tensioned was 158.879${\mu}m$. We knew that a side length of opening of the screen rarely changes with tension applied to the screen. The appearances that a side length of opening of the screen expand little are due to a decreasing diameter of thread by means of tension. In a thickness measurement of screen, While the high density mesh screen that had a lot of knots that crossed a line of latitude and longitude per unit area appeared a higher numerical value, the low density mesh screen that had a few knots appeared a low numerical value.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.29 no.3
• /
• pp.125-132
• /
• 2011

Is very simple in tension work of screen mesh for effective printing if worker uses screen mesh of player who desire at screen print process. General method is methods that use mesh of player who want on screen frame as screen plate because tensioned. The single layer screen plate was made from one sheet screen mesh and the double layer screen plate was made from two sheets screen mesh overlapped. The thickness of sensitive emulsion applied to double layer screen plate is more thicker than two time s of thickness of emulsion applied to single layer screen plate. It seems that the sensitive emulsion inserted between an upper layer and a lower layer of double layer screen mesh.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.25 no.2
• /
• pp.59-67
• /
• 2007

The working environment of DTP tends to increase from Macintosh to MS Windows in Korea because of being developed exclusively cross-platformed applications. Base of this change is not related to spread of using PDF. Recently, it's cause of falling into dilemma in Prepress. It's due that operators in Prepress don't have correctly understanding about differences and features between Postscript and PDF. This paper tried to search a way to solve problems via changing circumstance in operating Postscript and PDF.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.25 no.1
• /
• pp.81-94
• /
• 2007

Recently, the trend in the printing industry includes shorter run lengths and with fast turnaround times. As new markets have made it possible to produce small quantities of high-quality color products at affordable price, the general commercial printing meets the customer's diverse demand by using spot color besides process four colors. Especially, by using spot color for printing the enterprise's logo or specific color, we can see the effect of printing is getting better. With the combination of the right software, ink, media, and device can be treated as a digital proofer for spot color printing, providing significant time and cost savings compared to conventional procedures. The objective of this study is to investigate the quality of spot color proofs printed by ink-jet and dye sublimation proofer using ICC-based color management system. An Epson Stylus Color 3000 ink-jet proofer combined with Best Color Proof XXL RIP was tested for glossy and matte paper. 3M Rainbow dye sublimation proofer was examined using 3M Rainbow controller ver. 4.1 RIP on the manufacturer recommended proofing paper. ICC profiles were generated for each device using ECI 2002 visual target and evaluated for the accuracy of process 4 color reproduction. The test charts consisting of Pantone color 1140 was selected to test the quality of spot color reproduction.

• The Journal of the Korea Contents Association
• /
• v.16 no.10
• /
• pp.656-663
• /
• 2016

The study focused on the printed sheet music delivering the classical music contents in the view of the media. Media scholar Marshall Mcluhan declared that the media is not just simple tool of delivery but is the main subject affecting the human perception and the content itself. The music media, sheet music invented by the development of the printing technique allowed the massive production and it generalized the classical music contents. However, the editing, the mandatory process for sheet music, created the editors who are standardizing and visualizing the music contents and until today, the sheet music delivers the editor's interpretation rather than the composer's. To prove this notion, the study will compare the manuscript and sheet music of Unaccompanied Violin Sonata no. 3 'Fugue' by J. S Bach and will discuss about the compatibility of the sheet music as the music media now.