• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.1
• /
• pp.177-184
• /
• 2023

In this paper, based on Arduino, a vehicle is installed at the bottom of the 3D printer so that Arduino controls the vehicle that can expand the moving space. A stepping motor was mounted on the front wheel of the vehicle and precisely controlled using a motor driver. As a result, when moving 5cm, 25cm, and 50cm, the mean value of error rate was 0.6%, 0.04%, and 0.02%, respectively, to enable accurate distance control.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.14 no.2
• /
• pp.1-20
• /
• 1996

we describes a method for realizing the color conversion from the tristimulus (X, Y, Z) values to the print ink signals (C, M, Y) by using neural networks. The realized nonlinear color conversion system consists of two hidden layers those have seventeen nodes. We determined the C, M, Y values of the input control signals to compensate the printer nonlinearity of real systems. Experimental results showed that the described method is useful and valid to realized the nonlinear color conversion.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2020.11a
• /
• pp.609-612
• /
• 2020

보급형 FFF 3D프린터에서 발생되는 문제점인 화재의 위험, 사용자의 불편성, 장시간의 프린팅 시간으로 인한 문제등을 해결하기 위하여 보급형 FFF 방식의 3D프린터에 많이 사용되는 ATmega ARM 기반 칩셋의 보드를 분석하여 시리얼 통신을 이용한 원격 프로그램을 구성하여 보급형 FFF 3D프린터에서 발생되는 문제점을 해결하고자 하였다.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.1809-1810
• /
• 2006

Existing a high-speed printer register controller have used a foreign country goods of the high price. It established the plan to be and progressed to progress research. It find out about former time's a register control system's action. and determined the processor to DSP. It studied the algorithm to consider various situations. It completed finally a simulator board of a register controller of the high capacity.

• IE interfaces
• /
• v.24 no.3
• /
• pp.258-266
• /
• 2011

In this paper, we deal with a problem improving the productivity of a discrete production line for filling a printer cartridge with toner. We develop a new technology for controlling the weight of toner which must be filled in a cartridge and reform the current line based on our new control technology to result in more than 35% improvement of productivity as well as the control accuracy. In detail, first, we find a bottleneck process, the toner-filling process which gives the current production cycle times. Second, we divide the processing time of the bottleneck into several work elements and find the rotation time of an AC servomotor to be further reduced. Third, in order to reduce the rotation time, we develop a mathematical control-time model for determining the rotation time. Finally, we reform the current line partially as required by the change of the new control method.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.255-259
• /
• 1996

This paper describes a system for measurement and control of a gas flow. In order to measure the flux of gas and control a vavle according to flux, this system was developed. This system is implemented on the personal computer and its environment is developed tool called TMS. This system includes a main program and Tele-Metering Unit for transmitting correcting flow value based on temperature and pressure in flow computer and AD converter for transmitting instantaneous flow rate, temperature and pressure as interface part of personal computer. This system was made by Visual C++ program. Using this system, inspected data for the recognition of transmitting flow value are generated on the screen, file and printer. The activity, reliability of this system was verified on Daegu-Citygas that aids the system for the acquisition of inspected data by realtime application.

• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.3
• /
• pp.373-376
• /
• 2021

Tested the flexural strength and maximum load of two types of dental 3 D printed temporary tooth materials of the DLP method. The average flexural strength was 206.98 MPa in the test group and 139.77 MPa in the control group. The average flexural strength of the experimental group was 67.21 MPa higher than that of the control group. In the maximum load experiment, an average of 44.16N in the experimental group and 37.31N in the control group were measured. The average value of 6.85N was higher in the experimental group, and the durability of the artificial tooth restoration was improved.

• Journal of Energy Engineering
• /
• v.29 no.1
• /
• pp.75-84
• /
• 2020

This study investigates a simple, yet effective and affordable, manufacturing method to increase the electrical efficiency by triboelectric generator (TEG) applying 3D printers. In this study, we propose the newly manufacturing method for producing a macroscale surface patterning. Overall experiments were conducted in designed test-bed chamber system which can control the magnitude and frequency of the frictional force and the relative humidity. Furthermore, we can demonstrate the voltage enhancement of macroscale surface patterns about 1.6-fold. The peak voltage producing by TEG was as high as 18 V. In comparison with conventional process that employ micro- and nanoscale patterns, the proposed process by 3D printer is faster and more suitable for mass production.

• Journal of Platform Technology
• /
• v.8 no.1
• /
• pp.24-32
• /
• 2020

This paper designed and manufactured a chip mounter based on 3D printer technology that can be used for educational research or sample production to disseminate chip mounter, a core technology of SMT line. A stepper motor with open loop control is used for low cost drive design. The shortcomings of the motor's vibration and disassembly caused by the use of the step motor were compensated by the Micro-Step control method. In the chip mounter experiment, the gerber file was generated on the small chip mounter, printed at the actual size, and the solder cream was printed on the HASL-treated PCB in the same manner as the sample board fabrication. As a result of the experiment, unlike the 2012 micro components, parts such as SOIC and TQFP that require correction are twice as long as the component mounting time, but it can be confirmed that they are mounted relatively accurately. In addition, as a result of repeatedly measuring the error of the initial position 10 times, it was confirmed that a relatively small error of about 0.110mm occurs.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.36 no.4
• /
• pp.254-261
• /
• 2020

Purpose: The purpose of this study was to assess the marginal and internal fit of interim crowns fabricated by two different manufacturing method (subtractive manufacturing technology and additive manufacturing technology). Materials and Methods: Forty study models were fabricated with plasters by making an impression of a master model of the maxillary right first molar for ceramic crown. On each study model, interim crowns (n = 40) were fabricated using three types of 3D printers (Meg-printer 2; Megagen, Zenith U; Dentis, and Zenith D; Dentis) and one type milling machine (imes-icore 450i; imes-icore GmbH). The internal of the interim crowns were filled with silicon and fitted to the study model. Internal scan data was obtained using an intraoral scanner. The fit of interim crowns were evaluated in the margin, absolute margin, axial, cusp, and occlusal area by using the superimposition of 3D scan data (Geomagic control X; 3D Systems). The Kruskal-wallis test, Mann-Whitney U test and Bonferroni correction method were used to compare the results among groups (α = 0.05). Results: There was no significant difference in the absolute marginal discrepancy of the temporary crown manufactured by three 3D printers and one milling machine (P = 0.812). There was a significant difference between the milling machine and the 3D printer in the axial and occlusal area (P < 0.001). The temporary crown with the milling machine showed smaller axial gap and higher occlusal gap than 3D printer. Conclusion: Since the marginal fit of the temporary crown produced by three types of 3D printers were all with in clinically acceptable range (< 120 ㎛), it can be sufficiently used for the fabrication of the temporary crown.