• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1519-1521
• /
• 2007

In this work, a coplanar-type plasma flat fluorescent lamp having cross type of electrode was fabricated by screen printing and sealing technique. Cross type of electrode with a dielectric layer were screen-printed on a rear glass plate, and then fired at $550^{\circ}C$. Phosphor was printed on and fired at $450^{\circ}C$. Finally, the lamp was sealed by frit glass at $450^{\circ}C$. The lamp of cross electrode type was studied depending on the electrode gap and the thickness of dielectric layer.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1305-1307
• /
• 2007

We show that the electrical properties of organic thinfilm transistors(OTFTs) can be enhanced by controlling the morphology of interface between screen printed electrodes and gate dielectrics. Modified surface of the insulator layer($SiO_2$) affect on the interface energy of electrode on $SiO_2$ layer. Contact angle measurement and FT-IR spectrum shows that the interface is properly modified. OTFTs device with high efficiency has been realized through modification of interface layer.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.223-226
• /
• 2011

To design a drawing at construction sites or ship yards, generally, they exploit CAD program, such as AutoCAD. They also carry the printed drawings in the fields in order to refer the designs. However, the printed designs are easy to be damaged. In this paper, we propose the design of a management system for the CAD drawings on top of the smart operating systems of a smart device. The proposed system exploits the index file based on the Fixed GRID file in order to improve the display speed of the drawings.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.655-657
• /
• 2002

The carbon nanotube emitters for field emission displays were fabricated by screen printing techniques. The pastes for screen printing are composed of organic binders, carbon nanotubes, and some additive materials. Then the pastes were printed on Cr-coated/Ag-printed soda-lime glass substrates. From the I-V characteristics, the turn-on field of SWNT was lower than that of MWNT. The decrease in the mesh size of screen masks resulted in decreasing the turn-on field and increasing the electron emission current. When the carbon nanotubes were mixed with glass frit, glass frit appeared to contribute to the vertically aligning of carbon nanotubes on glass.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2001.06a
• /
• pp.149-152
• /
• 2001

The goals of this papper are not only to maximize of performance but also to reduce the response time for the real-time printed alphabets recognition system using the backpropagation algorithm in the artificial neural network. The Genesis board and MIL(Matrox Image Library) package were used to real-time acquisition, processing and display of images. Through this experiment proved the possibility of real-time recognition processing by comparing response times of the system and proposing the method to reduce of order of the output vectors.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.889-892
• /
• 2009

We have developed a practical printing technology for the gate electrode of organic thin film transistors(OTFTs) by combining screen-printing with wet-etching process using nano-silver ink as a conducting material. The screen-printed and wet-etched Ag electrode exhibited a minimum line width of ~5 um, the thickness of ~65 nm, and a resistivity of ${\sim}10^{-6}{\Omega}{\cdot}cm$, producing good geometrical and electrical characteristics for gate electrode. The OTFTs with the screen-printed and wet-etched Ag electrode produced the saturation mobility of $0.13cm^2$/Vs and current on/off ratio of $1.79{\times}10^6$, being comparable to those of OTFT with the thermally evaporated Al gate electrode.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.30 no.2
• /
• pp.23-33
• /
• 2012

With the development of many display technologies currently applied to them in the field of printed electronics, there have been many researches that high resolution printing for thin and uniform pattern. In this paper, printing ink flow properties in the reverse offset mechanism were simulated. The aim of this research is to expect the ink flow behavior between cliches to make fine pattern by a printing technique which is a reverse offset. The simulation results show that almost the same as the experiments and the flow behavior according to the ink film thickness and printing pressure changes could be expected.

• Transactions on Electrical and Electronic Materials
• /
• v.12 no.6
• /
• pp.267-270
• /
• 2011

In the process of inkjet-printed zinc tin oxide thin-film transistor, the effect of metallic interlayer underneath of source and drain electrode was investigated. The reason for the improved electrical properties with thin molybdenum oxide ($MoO_3$) layer was due to the chemically intermixed state of metallic interlayer, aluminum source and drain, and oxide semiconductor together. The atomic configuration of three Mo $3d_3$ and $3d_5$ doublets, three different Al 2p core levels, two Sn $3d_5$, and four different types of oxygen O 1s in the interfaces among those layers was confirmed by X-ray photospectroscopy.

• Journal of Satellite, Information and Communications
• /
• v.12 no.1
• /
• pp.54-57
• /
• 2017

In commercial facilities, it is very difficult in real to promote specific products among various products because various products are displayed and sold. Therefore, in order to promote information on most display products, there is a great tendency to rely on printed matter or salesperson. So, it is focused to display advertising or promotional video based on interactive user information by utilizing the diplay used in the store, and to implement technology considering energy saving. Also it is very utilized for a specific product sold or displayed at a commercial facility to be sent to manufacturer or advertiser who wants to promote specific products and content at customer contacts. In this study, we implemented that maximized advertisement effect through the advertisement video and combination of product using transparent display. we implemented User-oriented image display technology to provide an interactive service according to whether there is a user or not. Through this study, we proposed a new direction to maximize advertising/public relations effect in various commercial facilities.

• Journal of information and communication convergence engineering
• /
• v.18 no.3
• /
• pp.188-193
• /
• 2020

In this paper, we examine whether the 3D image experience through a light-field display device showed the difference in the arousal of the user compared with the 2D image experience. For our experiment, the Looking Glass^TM (LG) was used as a lightfield display device that provided 3D images, and 2D images were provided by digital and printed images. The subject's facial behavior during each media experience was recorded for analysis and the degree of arousal was measured by FaceReader^TM. As a result, the first image presented in the first order among the three kinds of images showed that there was a statistical difference in the degree of arousal between the three media. However, no significant differences were found between the three media in the other images. This may be because the arousal did not increase from the experience of the second image through the LG, owing to habituation. In conclusion, the 3D imaging experience may appear in the beginning, but does not continue.