• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.10
• /
• pp.1261-1268
• /
• 2019

In this paper, we present the analysis of a novel monopole antenna with a reflector. The proposed monopole antenna is printed on a TRF-45 substrate, and the reflector, which is positioned near the base of the antenna, is printed on the FR-4 substrate. Positioning the reflector near the base of the antenna was found to suppress current radiation toward the back of the monopole antenna. Comparative analysis of the proposed monopole antenna and a conventional monopole antenna without a reflector revealed that the bandwidths of the antenna with and without a reflector were 2.65 GHz and 2.88 GHz, respectively. Additionally, the antenna without a reflector was observed to have a bi-directional radiation pattern in the E-plane, and an omni-directional radiation pattern in the H-plane. However, only the antenna with a reflector was found to suppress back radiation, and provide non-uniform directional radiation in the E-plane and H-plane.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2001.11a
• /
• pp.136-139
• /
• 2001

In this paper, we propese a novel wide band printed monopole antenna called the staircase bow-tie monopole antenna (SBMA). We apply an extraordinarr method for an impedance matching to conventional bow-tie monopoles. So we get the SBMA with a very wide band. Our antenna is smaller than a quarter wavelength in size but provides a 2:1 VSWR bandwidth of about 77.8%. An antenna gain and a radiation pattern are about 1.7dBi and omni-directional at 1.7 GHz, respeotively.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.619-622
• /
• 2006

A printed Tee-type monopole antenna loaded by a pair of L-type slots is studied. The effects of position, width, and length of loaded slots on frequency bandwidth of the antenna are examined. As an examples, a compact dual band monopole antenna is designed for the ISM band $[2.4\sim2.48GHz,\;5.15\sim5.35GHz,\;and\;5.725\sim5.85GHz]$ use and the characteristics of the constructed antenna are studied experimentally.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.8
• /
• pp.125-130
• /
• 2004

Various antennas have been developed to be used for UWB systems, However, Simultaneously meet omni-directional and low-VSWR requirements, essential for some applications such as UWB channel sounding. In this paper, we propose a novel wide band printed elliptic monopole antenna for UWB(Ultra wide Band). Wideband planar monopole disc antenna have been recently studied. The proposed antenna can cover m frequencies from 3.5GHz to 12GHz. it is determined from 10dB return loss. Antenna radiation pattern is omnidirectional at 3.5GHz - 10GHz. The antenna consists of the printed elliptical monopole disc with microstrip-line feed. Elliptic disc of antenna and ground height operate important to matching. The proposed antenna easy to construct UWB system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.11
• /
• pp.1233-1239
• /
• 2008

In this paper we proposed a novel broadband printed monopole antenna for PCS/IMT-2000/WLAN terminals by widening current flow To compensate narrow bandwidth characteristics which is one of disadvantages of general printed monopole antenna, we add the patch of diamond shape and induce the current in various directions for acquiring broadband characteristics. And frequency characteristics is optimized with Various design parameters. The bandwidth of the realized antenna is $1.66{\sim}3.04\;GHz$(58.72 %) below the return loss of -10 dB which contain the required band-width of PCS/IMT-2000/WLAN band.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.12
• /
• pp.1391-1401
• /
• 2007

This paper proposed a novel broadband printed monopole antenna for PCS/IMT-2000/WLAN terminals. Frequency characteristics are optimized with various design parameters. Two Z-shaped patchs were utilized in order to improve the characteristics of a printed monopole antenna which usually has a narrow bandwidth. The bandwidth of the realized antenna is $1.590{\sim}2.614$ GHz(48.43 %) below the return loss of -10 dB which contain the required bandwidth of PCS/IMT-2000/WLAN band. The simulated and measured values of 1 g and 10 g averaged peak SAR on human head caused by the proposed antenna on folder-type phone were analyzed and discussed. As a result, the measured 1 g peak SAR value is 0.794 W/kg and 10 g peak SAR value is 0.368 W/kg at 1.8 GHz. The results are smaller than the reference SAR limit values that are respectively 1.6 W/kg and 2 W/kg on 1 g and 10 g averaged SAR values.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.6
• /
• pp.625-630
• /
• 2011

In this paper, spiral meander monopole printed antenna for dual band operation in GPS(1.57~1.577 GHz) and WiBro(2.3~2.4 GHz), WLAN(2.4~2.48 GHz) is proposed. Spiral(positive coupling) mounted end of monopole(small current) and meander mounted fed of monopole(big current) for reduce frequency ratio. Bandwidth(-10 dB) of the antenna is measured 130 MHz(1.49~1.62 GHz) in basic resonance frequency and 330 MHz(2.29~2.62 GHz) in harmonic resonance frequency($3{\lambda}_H/4$). The peak antenna gains are measured 2.86 dBi in GPS(1.57 GHz), and 3.49 dBi in WiBro(2.35 GHz), and 3.71 dBi in WLAN(2.44 GHz).

• Journal of Advanced Navigation Technology
• /
• v.15 no.2
• /
• pp.189-196
• /
• 2011

In order to subsitute for the normal mode helical wire antenna, bent monopole antenna combined with a helical structure is proposed as a kind of printed antenna. The antenna which can be operated at 418MHz has been simulated and designed by use of a commercial EM simulator Microwave Studio(MWS). It has been observed that the proposed antenna has good agreements between simulated results and measured results such as the return loss and the radiation pattern. The proposed antenna has been applied practically to the wireless remote controller operationg at 418MHz. It has been observed that the use of the proposed antenna result in similar antenna performance from view point of radiation power when compared with the use of the previous normal mode helical antenna.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.5 no.2
• /
• pp.123-127
• /
• 2004

A printed folded-monopole antenna for portable wireless applications is presented. The proposed design is based on the folded quarter-wave antennas, which have a conductor plate having two arms. A prototype antenna is fabricated according to the simulation result. The obtained antenna can perform in 2.4GHz band and be adopted for laptop applications. All the measurements are performed in the actual test fixture.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.339-340
• /
• 2008

This paper presents a novel design of the printed hyperpolar-transformed Sierpinski Carpet (HSC) antenna. By hyperpolar transforming the Sierpinski carpet geometry, from isotropic scaling symmetry to equiangular scaling symmetry, we get improved performance rather than that of the general Sierpinski Carpet antenna. The design parameter and performance of the proposed monopole antenna are investigated by simulation. And we showed that proposed HSC geometry gives more freedom for wideband antenna design such as flare angle, (angular)scale factor.