• Restorative Dentistry and Endodontics
• /
• v.25 no.2
• /
• pp.225-234
• /
• 2000

The purpose of this study was to investigate the distribution and fluorescene intensity of vasoactive intestinal polypeptide(VIP) immunoreactive cells in rat trigeminal ganglion after inferior alveolar nerve axotomy. The animals were divided into normal and two experimental groups. The experimental animals were sacrificed at 14th and 28th day after inferior alveolar nerve axotomy. The trigeminal ganglion was removed and immersed in the 4% paraformaldehyde-0.2% picric acid in 0.1M phosphate buffer. Serial frozon sections about $16{\mu}m$ in thickness were cut with a cryostat. The immunofluorescence staining was performed. The rabbit anti-VIP(1 : 8,000) was used as primary antibody and fluorescene isothiocynate(FITC)-conjugated anti-rabbit IgG(1 : 80) as secondary antibody. The slides were observed under confocal laser scanning microscope. Three-dimensional images were constructed from 9 serial images(each $1{\mu}m$ in thickness) made by automatic optical sectioning. Unprocessed optical sections were obtained and stored on a optical disk. Color picture were printed by a video copy processor. The results were as follows; 1. The appearance of VIP immunoreactive cells in the mandibular part of trigeminal ganglion was 8.79${\pm}$1.99% in normal group and 39.16${\pm}$5.62% in 14 days, 16.25${\pm}$2.39% in 28 days after inferior alveolar nerve axotomy groups. 2. The relative fluorescence intensity of VIP immunoreactive cell bodies in the mandibular part of trigeminal ganglion was 134.40${\pm}$10.39 in normal group and 192.88${\pm}$14.06 in 14 days, 143.10${\pm}$5.02 in 28 days after nerve axotomy groups. Therefore, the relative fluorescence intensity of 14 days after nerve axotomy group was 43.3% higher than intensity of normal group. 3. In optical single section analysis of VIP immunoreactive cell bodies, white cell bodies(moderate fluorescence intensity) were the most abundant in normal and 28 days after nerve axotomy groups. Whereas, in 14 days after nerve axotomy group, red cell bodies(high fluorescence intensity) were the most abundant. 4. In optical serial section analysis of VIP immunoreactive cell bodies, red cell bodies(high fluorescence intensity) were observed in a part of the 9 sections of normal and 24 days after nerve axotomy groups. Whereas, red cell bodies were observed in all of the 9 sections of 14 days after nerve axotomy group. 5. The results indicates that number and fluorescence intensity of VIP immunoreactive cells were increased in the mandibular part of trigeminal ganglion following inferior alveolar nerve axotomy.

• Journal of Conservation Science
• /
• v.37 no.2
• /
• pp.167-178
• /
• 2021

For the preservation and efficient content sharing of 5 volumes (2,866 pages) of Yu Kil-Chun's book published in 1971, which provides an important collection of data for the study of modern Korean history during the late 19th century (enlightenment period of Joseon dynasty). The books were purchased and its preservation status investigated and documented electronically by scanning for permanent preservation of content and to determine the condition of preservation at the time of documentation. The degree of deterioration and damage, such as discoloration, hardening, breakage, and damage in these 50 years old modern printed books was quantified through image analysis and made attempts to visualize the damaged areas. It was observed that the degree of deterioration and damage depended on the material and the surface condition of the paper used, the degree of exposure to light, and the storage environment. The comparison of the preservation status at the time of the photographing (or scanning) and judgment as to whether or not the image under investigation was artificially modified was accomplished by comparing the electronically documented images of Seoyugyeonmun (西遊見聞) in Volume 1 of Yu Kil-Chun's works with images provided on other websites. Practical problems encountered while considering the effective preservation of electronically documented data and publicly sharing it, in the course of this study, with other academic researchers around the world were also summarized.

• Progress in Medical Physics
• /
• v.32 no.4
• /
• pp.99-106
• /
• 2021

Purpose: In this study, we aimed to manufacture a patient-specific gel phantom combining three-dimensional (3D) printing and polymer gel and evaluate the radiation dose and dose profile using gel dosimetry. Methods: The patient-specific head phantom was manufactured based on the patient's computed tomography (CT) scan data to create an anatomically replicated phantom; this was then produced using a ColorJet 3D printer. A 3D polymer gel dosimeter called RTgel-100 is contained inside the 3D printing head phantom, and irradiation was performed using a 6 MV LINAC (Varian Clinac) X-ray beam, a linear accelerator for treatment. The irradiated phantom was scanned using magnetic resonance imaging (Siemens) with a magnetic field of 3 Tesla (3T) of the Korea Institute of Nuclear Medicine, and then compared the irradiated head phantom with the dose calculated by the patient's treatment planning system (TPS). Results: The comparison between the Hounsfield unit (HU) values of the CT image of the patient and those of the phantom revealed that they were almost similar. The electron density value of the patient's bone and brain was 996±167 HU and 58±15 HU, respectively, and that of the head phantom bone and brain material was 986±25 HU and 45±17 HU, respectively. The comparison of the data of TPS and 3D gel revealed that the difference in gamma index was 2%/2 mm and the passing rate was within 95%. Conclusions: 3D printing allows us to manufacture variable density phantoms for patient-specific dosimetric quality assurance (DQA), develop a customized body phantom of the patient in the future, and perform a patient-specific dosimetry with film, ion chamber, gel, and so on.

• Korean Journal of Heritage: History & Science
• /
• v.56 no.2
• /
• pp.124-133
• /
• 2023

Preservation processing for two combat boots was executed through application of 3-dimensional digital technology and with use of preservation materials providing outstanding reversibility and stability. The aim of this was to establish a method to preserve the relics of fallen Korean War soldiers that had been excavated by the soldiers remains excavation corps of the Ministry of National Defense. It was possible to estimate the foot size of the soldiers who would have worn the combat boots via 3-dimensional digital scanning and modeling of the boots. In this process, the original form of the combat boots was restored through the use of 3D-printed structures. The original form was restored through a process of removing contaminants from the excavated relics and performing a conditioning treatment, and through use of an antique-color treatment after bonding and filling in the sections that had been ripped or deteriorated. Following the aforementioned preservation processes, it was possible to confirm that both of the combat boots had soles and top sections made of rubber, and portions of the top section and ankle section of the boots were made of synthetic rubber. As such, it was confirmed that these were similar to the Shoe Pac(M-1944, 12-inch) winter boots that had been manufactured for the purposes of waterproofing and/or protection against cold, and introduced in 1944. Such results confirmed that it is possible to discover the manufacturing techniques, materials, and uses of relics excavated through application of preservation processing, thereby illustrating the importance of the convergent research of scientific preservation processing and 3-dimensional digital technology.

• The Journal of Korean Academy of Prosthodontics
• /
• v.62 no.1
• /
• pp.6-19
• /
• 2024

With the advancement of Computer-Aided Design/Computer-Aided Manufacturing (CAD-CAM) technology, fabrication of dentures using this technology has gained popularity. As one of CAD-CAM technologies, digital complete denture system has been introduced, which fabricates complete dentures using subtractive manufacturing of monolithic block containing both the color of a denture base and an artificial tooth. In this case, two pairs of upper and lower dentures were fabricated for two patients. Two pairs of complete dentures were fabricated for a 74-year-old male and a 73-year-old female respectively by conventional denture fabrication method and digital method of milling. To obtain a digital complete denture, monolithic block (Ivotion, Ivoclar Vivadent, Schaan, Liechtenstein) was chosen for the materials to fabricate the digital complete dentures. An individual tray was designed using CAD software and manufactured by 3D printing technique. The final impression and interocclusal relationship were recorded using the fabricated individual tray. The final impression was scanned, and the complete denture design and try-in denture were 3D printed using CAD-CAM software. Subsequently, the monolithic block was milled, and the final dentures were fabricated and tried on patients. Previously mentioned two patient cases compared and analyzed stability, fit, speaking, mastication, aesthetics, and patient satisfaction of two pairs of dentures: one fabricated using CAD-CAM system and the other using traditional methods. This was performed to evaluate and report the findings from both denture-making approaches.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.52 no.3
• /
• pp.239-248
• /
• 2007

Although high nutritional values and continuous identification of important functional substances of soybean [Glycine max (L.) Merrill.] promote consumption of soybean products worldwide, informations on quality of brand soybean is not enough for consumers. Total of 100 brand soybeans [32 for soypaste and source, 45 black testa (lage), and 17 black testa (small) or medicinal soybean and beansprout soybean] were collected at supermarkets and several external quality factors were analyzed. Brand soybeans were marked with the environmental friendly and intimating words along with soybean (white or yellow), black soybean (black-, frost-, late frost-, green or inner-green-), medicinal soybean and beansprout soybean. Among 100 brand soybeans 30% was 1 kg package and 59% was 500 g package, difference between printed and actual weights of 70% brand soybeans was ${\pm}1%$ and weights of 2/3 of brand soybeans were higher than printed weight. Range of 100 seed weights of soypaste and source, black testa (large) and black testa (small) and beansprout soybeans were $23.7{\sim}47.8g$, $21.9{\sim}44.5g$ and $9.5{\sim}15.0g$, respectively. Although ranges of 100 seed weights of soypaste and source and black testa (large) soybeans were similar, 63% of soypaste and source were less than 29 g, while 78% of black testa (large) soybeans were higher than 30 g. Although average and highest percentages of seeds separated with 6.7 mm sieve were similar with 87.4% and 99.9% for soypaste and source soybean and 86.5% and 99.5% for black testa (large) soybean, respectively, the lowest percentages were 70.7% for soypaste and source soybean and 14.4% for black testa (large) soybean. When 100 seed weight was greater than 35 g, 90% of seeds were remained on 6.7 mm sieve. On the other hand 100 g weight and percentage of seeds remained on 6.7 mm sieve showed significantly positive correlations [r=0.7488** for soypaste and source soybean and r=0.7874** for black testa (large) soybean when 100 seed weight was $20{\sim}30g$. Based on hilum color and/or appearance, 76% of brand soybeans collected (more than 90% in yellow testa soybeans) were found to be mixed more than 10% with other cultivars or landraces. Foreign materials such as sand, piece of clothe, wood piece, dead insects, other soybeans were found in 20% of brand soybeans. Average test weight of brand soybeans was 762g $L^{-1}$ with a range of $645{\sim}820g\;L^{-1}$. Soybeans from local markets were as good as brand soybeans in 100 seed weight, uniformity of seeds, weight of foreign materials and test weight.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.1
• /
• pp.25-31
• /
• 2001

The purpose of this study was to investigate the distribution and fluorescence intensity of vasoactive intestinal polypeptide immunoreactive (VIP-IR) cells in rat trigeminal ganglion following pulp extirpation of rat mandibular molar. The animals were divided into control group(n=6) and experimental group(n=6). The experimental animals were sacrificed at 14 days after pulp extirpation. The trigeminal ganglion was removed and immersed in the 4% paraformaldehyde in 0.1M phosphate buffer. Serial frozen sections about $20{\mu}m$ in thickness were cut with a cryostat. The immunofluorescence staining was performed. The rabbit anti-VIP(1 : 8,000) was used as primary antibody and fluorescene isothiocynate(FITC) conjugated anti-rabbit IgG(1 : 80) as secondary antibody. The slides were observed under confocal laser scanning microscope (CLSM). Unprocessed optical sections were obtained and stored on a optical disk. Color pictures were printed by a video copy processor. The results were as follows; 1. The positive ratio of VIP-IR cells in mandibular part of trigeminal ganglion were 7.40% in control group and 28.42% in experimental group(14 days after pulp extirpation). 2. The relative fluorescence intensity of VIP-IR cells in mandibular part of trigeminal ganglion were 87.78 in control group and 138.65 in experimental group. The relative fluorescence intensity of experimental group was 58% higher than that of control group. 3. In optical serial section analysis of VIP-IR cells of experimental group, most of the 9 sections showed high fluorescence intensity. At high magnification, axons of the experimental group displayed greater VIP-IR than in the control group, and the positive cells were mainly of medium size. The result indicate that number and fluorescence intensity of VIP-IR cells were increased in the mandibular part of trigeminal ganglion following pulp extirpation of mandibular molar, and it suggests that VIP could play a role in processing of nociception.

• Hwankyungkyoyuk
• /
• v.7 no.1
• /
• pp.46-87
• /
• 1994

Our country has been consuming a huge amount of energy in the course of industrialization and its demand is expected to increase enormously in the future. However, the deposits of energy resources are so limited that the settlement of energy problem comes up the essential subject. To solve the energy problem, it is requested that new resources to gain energy stably should be developed and also energy should be economized and used effectively. The effective use of energy and an the wisdom of economy in energy are requested to everybody and these things should be habitualized from very young age through education. Nevertheless, almost every school in our country hasn’t been concerned about energy education. Even though they have a concern, they are very short of the energy education materials and the quality of the materials is not so good. Therefore it is very meaningful to the settlement of energy problem of the country to make the students who will lead our country to make the students who will lead our country in the future realize the seriousness of energy problem and to provide them the necessary knowledge and methods to solve this problem so that they practice those things in everyday life. Having these necessities, this research, supported by The Korea Energy Management Corporation(KEMCO), was performed for 8 months from April 17, 1994 to December 17, 1994. Many peoples participated in this study such as 30 staffs of researchers and authors, 5 staffs of photographers and illustrators, and 3 VCR program producers developing an energy education material set for middle school students that includes a printed material for student, a diskette for computer simulation, a teacher's guidebook, VCR material and its guidebook. The following main development direction was established : First, the material for student should be consisted of units that let students know the seriousness of energy problem. Second, the focus should be put on the necessary method and practice to economize energy actually in real life based on the basic knowledge learned in elementary school. Third, material for student should be consisted of modules to be student activity-oriented teaching-learning rather than lecture-oriented one. The activity, to maximize student's interests, should be presented in various forms such as experiments, investigation, play, data interpretation, computer simulation, visits, expression and appreciation, etc. To develop the energy education materials for middle school students, a research plan was made first. After literature review about domestic and foreign energy education materials, several research trips home and abroad, and discussion meetings, the basic theory of energy education such as the principle, objective, contents, teaching-learning method, and evaluation method was established. Material for student was developed through the following procedures : The activities in the existing energy education materials were analysed and were divided into four categories related to energy using places of home, school, community, and country, and which were again divided into three categories related to time of past, present, and future, Considering these division, nine modules which are structure units of material for student were chosen, Each module comprises 2-4 activities. Totally 31 activities were designed in this way. The syllabi were made out for each activity and writing was asked for to experts related to each activity after several discussions and revision. To complement the draft, another several discussions and revision were also made on it and then pictures and illustrations were asked for. All these procedures complete the material for student, titled ; Energy Inquiry of Middle School Students', which totals 129 pages and is all in color. As the manuscript of material for student was fixed, writing for teacher's guidebook was asked for to the same writers. The draft of teacher's guidebook was also complemented through the several concentrated works and discussions. Teacher's guidebook focused on the teaching-learning principle and methods of energy education and on the concrete instruction cases for effective instruction of material for student. It is organized with two parts : the one is 'general outline' which introduces theoretical contents and the other is 'details' which are practically helpful to teaching-learning. It is totally 131 pages including both 'general outline' and 'details'. The VCR material and its guidebook consist of contents that cultivate the good attitude trying to economize energy and raise student's interests with a purpose of strong motivation to recognize the necessity of economy and practice it. After establishing development direction of VCR material through discussion meetings and research trips, its script was made by relevant experts. Then the script was also reviewed two times. The drafted VCR material made by a video material developing expert was examined and modified by previews twice. After completion of VCR material, the VCR guidebook was made. All these procedures led to the development of VCR material which runs 20 minutes in VHS type. The VCR guidebook shows a production purpose of the program, structure of contents, evaluation methods, and contents of the program in detail to give help to instructors when they use this VCR material, When these energy education materials are used, it is desirable that the VCR material should be presented first to induce student's motive, and then material for student is introduced Since the material for student is composed of activity-oriented modules and each module is independent one another in general, and each activity is, too. the necessary module or activity can be chosen and utilized in any order according to school or class conditions. This energy education materials will contribute to the development of student's ability to solve energy problem in everyday life and teacher's ability to teach the fundamental knowledge and method in solving energy problem.

• Journal of Plant Biotechnology
• /
• v.39 no.3
• /
• pp.140-145
• /
• 2012

The flowering locus T (FT) gene, of which expression will be controlled at high temperature by heat shock promoter (it printed as to HSproFT), was introduced into spray-type chrysanthemum (Dendranthema grandiflorum (Ramat.) Kitamura) 2 cultivars ('Pink PangPang' and 'Pink Pride' by co-cultivation with Agrobacterium tumefaciens strain C58C1 harboring pCAMBIA2300 containing the HSproFT gene. After leaf segments of the 2 cultivars were infected with the A. tumafaciens with C58C1 as explants, shoots were regenerated from the explants cultured on the $1^{st}$ selection medium (MS basal salts + 1.0 mg/L BA, 0.5 mg/L IAA + 10 mg/L kanamycin + 0.7% plant agar, pH 5.8). The shoots were transferred into the $2^{nd}$ selection medium (MS basal salts + 1.0 mg/L BA, 0.5 mg/L IAA + 20 mg/L kanamycin + 0.7% plant agar, pH 5.8). One hundred seventeen plantlets from 'Pink PangPang' and 5 ones from 'Pink Pride' were confirmed as transformants by PCR analysis. Twenty six of the transformants and non-transformants were acclimatized and established well in a green house. Eights of 26 transgenic lines showed flower bud 1.7~10 days earlier than nontransgenic plants, and 24 of them flowered 1~6 days earlier than non- transgenic plants. The shape and color of flower of all HSproFT-transgenic lines were not different with those of non- transgenic plants.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2000.06a
• /
• pp.16-23
• /
• 2000

The increasing functional needs of top-quality printing papers and packaging paperboards, and especially the rapid developments in electronic printing processes and various computer printers during past few years, set new targets and requirements for modern paper quality. Most of these paper grades of today have relatively high filler content, are moderately or heavily calendered , and have many coating layers for the best appearance and performance. In practice, this means that many of the traditional quality assurance methods, mostly designed to measure papers made of pure. native pulp only, can not reliably (or at all) be used to analyze or rank the quality of modern papers. Hence, introduction of new measurement techniques is necessary to assure and further develop the paper quality today and in the future. Paper formation , i.e. small scale (millimeter scale) variation of basis weight, is the most important quality parameter of paper-making due to its influence on practically all the other quality properties of paper. The ideal paper would be completely uniform so that the basis weight of each small point (area) measured would be the same. In practice, of course, this is not possible because there always exists relatively large local variations in paper. However, these small scale basis weight variations are the major reason for many other quality problems, including calender blacking uneven coating result, uneven printing result, etc. The traditionally used visual inspection or optical measurement of the paper does not give us a reliable understanding of the material variations in the paper because in modern paper making process the optical behavior of paper is strongly affected by using e.g. fillers, dye or coating colors. Futhermore, the opacity (optical density) of the paper is changed at different process stages like wet pressing and calendering. The greatest advantage of using beta transmission method to measure paper formation is that it can be very reliably calibrated to measure true basis weight variation of all kinds of paper and board, independently on sample basis weight or paper grade. This gives us the possibility to measure, compare and judge papers made of different raw materials, different color, or even to measure heavily calendered, coated or printed papers. Scientific research of paper physics has shown that the orientation of the top layer (paper surface) fibers of the sheet paly the key role in paper curling and cockling , causing the typical practical problems (paper jam) with modern fax and copy machines, electronic printing , etc. On the other hand, the fiber orientation at the surface and middle layer of the sheet controls the bending stiffness of paperboard . Therefore, a reliable measurement of paper surface fiber orientation gives us a magnificent tool to investigate and predict paper curling and coclking tendency, and provides the necessary information to finetune, the manufacturing process for optimum quality. many papers, especially heavily calendered and coated grades, do resist liquid and gas penetration very much, bing beyond the measurement range of the traditional instruments or resulting invonveniently long measuring time per sample . The increased surface hardness and use of filler minerals and mechanical pulp make a reliable, nonleaking sample contact to the measurement head a challenge of its own. Paper surface coating causes, as expected, a layer which has completely different permeability characteristics compared to the other layer of the sheet. The latest developments in sensor technologies have made it possible to reliably measure gas flow in well controlled conditions, allowing us to investigate the gas penetration of open structures, such as cigarette paper, tissue or sack paper, and in the low permeability range analyze even fully greaseproof papers, silicon papers, heavily coated papers and boards or even detect defects in barrier coatings ! Even nitrogen or helium may be used as the gas, giving us completely new possibilities to rank the products or to find correlation to critical process or converting parameters. All the modern paper machines include many on-line measuring instruments which are used to give the necessary information for automatic process control systems. hence, the reliability of this information obtained from different sensors is vital for good optimizing and process stability. If any of these on-line sensors do not operate perfectly ass planned (having even small measurement error or malfunction ), the process control will set the machine to operate away from the optimum , resulting loss of profit or eventual problems in quality or runnability. To assure optimum operation of the paper machines, a novel quality assurance policy for the on-line measurements has been developed, including control procedures utilizing traceable, accredited standards for the best reliability and performance.