• Proceedings of the KIEE Conference
• /
• 2003.11a
• /
• pp.137-139
• /
• 2003

Micro-Sources arc emerging as a providing environmentally friendly and reliable and effective solution. Micro-Source converter DC voltage of prime mover to AC voltage using voltage source inverter for interjecting with AC grid system. This paper studies optimal series inductance size for interjecting with AC grid system.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.25 no.10
• /
• pp.555-561
• /
• 2013

The effects of applying the micro CHP system to the domestic sector in Korea were investigated using annual cooling and heating demand data. Four prime movers, micro gas turbine, PEMFC, gas engine and Stirling engine, were compared for three operational modes. Two way buy-back was assumed for both electricity and heat. The Stirling engine gave the lowest $CO_2$ emission per energy for 300kWh monthly electricity production. However, PEMFC became more effective when considering PURPA criteria. PEMFC generated the least greenhouse gas with higher electrical efficiency for cooling. The Stirling engine, however, became competitive for heating with higher total efficiency.

• Physical Therapy Rehabilitation Science
• /
• v.4 no.1
• /
• pp.44-48
• /
• 2015

Objective: The purpose of this study was to investigate the relationship between anticipatory postural adjustment (APA), single task, dual tasks and physical performances. The trunk muscles of APA consist of bilateral erector spinae (ES) and bilateral internal oblique (IO) adnominal muscles, during rapid stepping with the affected or unaffected leg in a sitting posture. Design: Cross-sectional study. Methods: In patients with chronic stroke, electrodes of surface electromyography (EMG) were attached on the bilateral erector spinae (ES), bilateral internal oblique adnominal (IO), and bilateral rectus femoris (RF) muscles. RF acts as the prime mover. The stroke patients performed hip flexion until $20^{\circ}$ as fast as possible at each leg in a sitting posture according to a visual cue. The visual cue unexpectedly appeared on monitor in front of the stroke patient. The single task was the Timed Up and Go (TUG) test. The dual tasks were the TUGconitive, which increased cognitive capacity, and the TUGmanual task, which had an external focus. Results: All EMG data showed earlier onset latency before the prime mover. In affected leg raising, the onset time of unaffected ES muscle of the stroke patients was correlated with the single and dual tasks (p<0.05). In unaffected leg raising, the onset time of the affected IO muscle was related to all the tasks (p<0.05). Gait speed showed a relationship with the unaffected ES muscle only. Conclusions: The trunk muscles of the bilateral ES and bilateral IO play an important role in APA. The single and dual tasks using TUG test were correlated with the APA s of ES and IO muscles. Dual task by the TUG test is a good measuring tool for reflecting the real life in patients with chronic stroke.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.10a
• /
• pp.248-253
• /
• 2009

The propulsion system which apply the diesel engine with reduction gear as prime mover, generally installs the elastic coupling between engine and intermediate shaft, This coupling can isolate the vibratory torque excited by diesel engine, or the excess transient torque and moment occurring by external impact. So, diesel engine and reduction gear can safely operate by elastic coupling. Unfortunately, the elastic coupling for skimmer vessel was repeatedly broken by unknown vibration during the sea trial In this paper, the authors are searching for the possibilities and causes of the elastic coupling failure, via the global vibration measurement and the past incident investigation.

• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.5
• /
• pp.1065-1075
• /
• 2001

It is common knowledge amongst electrical and marine engineers that short-circuit in electrical system may cause large mechanical torque on generator and prime mover However, it is not so widely known that the faulty synchronizing of generators may cause even higher torques than that of short-circuit. In this study, the transient phenomena related to the parallel running of synchronous generators are analyzed and the exact computer simulation method is proposed. In result, maximum transient torque and current take place in case of $120^{\circ}$ voltage angle difference between Master and Slave and that may develop higher torque than the short-circuit according to a condition of synchronizing. When synchronizing in power system using only two generators higher torque and current occur Master, but using multimachine system those occur to Slave. The short-circuit of marine generator does not happen frequently but faulty synchronizing sometimes takes place, therefore, it is necessary for designers to consider these phenomena.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.12
• /
• pp.99-108
• /
• 1999

A four-degree-of-freedom non-linear model with time varying mesh stiffness has been developed for the dynamic analysis of spur gear trains. The model includes a spur gear pair, two shafts, two inertias representing load and prime mover. In the model, developed several factors such as time varying mesh stiffness and damping, separation of teeth, teeth collision, various gear errors and profile modifications have been considered. Two computer programs are developed to calculate stiffness of a gear pair and transmission error and the dynamic analysis of modeled system using time integration method. Dynamic tooth and mesh forces, dynamic factors are calculated. Numerical examples have been given, which shows the time varying mesh stiffness ha a significant effect upon the dynamic tooth force and torsional vibrations.

• Journal of Korean Institute of Industrial Engineers
• /
• v.19 no.3
• /
• pp.3-10
• /
• 1993

The main propulsion system may be the most complicated of the shipboard systems. Many factors such as fuel economy, weight, space, first cost, reliability, vibration and noise must be considered when selecting the prime mover of the main propulsion system for ships. An expert system is a computer program that represents and reasons with knowledge of some specialist subject with a view to solving problems or giving advice. Recently, it is being developed increasingly with wider applications in many industries. This paper describes development of knowledge-based system for main engine selection of ships using general purpose expert system development tool, Nexpert Object. Developed system is consist of ship performance estimation module such as resistance and propulsion, data base for main engine, knowledge base for main engine selection in Nexpert Object and graphic user interface.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.11a
• /
• pp.290-296
• /
• 2006

Control algorithms and implementation issues for a wind turbine simulator are presented for realistic emulation of variable wind characteristics using a lab-scale motor and generator set. When the average wind speed nd turbulence level is given, the torque reference of prime mover is decided through various blocks, such as random wind speed generator, blade characteristic curves, and tower effect compensation. The variable nature of wind can be implemented and tested by not only the computer simulation but also the hardware-in-loop-simulator (HILS). Some application examples of HILS include the development and test of turbine control software for more efficient and stable operation. Feasibility of the proposed simulator has verified by computer simulations and experiment.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.4B no.2
• /
• pp.59-64
• /
• 2004

Study of an accurate and robust braking control method is required as a technical improvement to the servo system. In particular, the braker exhibiting constant braking performance under speed variation conditions of the prime mover needs to be investigated. In this paper, the braking torque of the eddy current braker between the electromagnet stator and rotating disk is analyzed. The torque-speed characteristics and accurate disk construction are represented. From the computer simulation results, it was found that eddy current braking torque is linear or approximately constant over the desired speed range depending on the rotor material, disk construction, pole number and pole displacement of the stator. These relations are confirmed by experimental results.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.90-95
• /
• 2008

Medium and high speed marine diesel engines have been widely used as prime mover in small car ferries and fishing vessels with reduction gear. These propulsion shafting system should be installed and matched the elastic coupling between engine and reduction gear to isolate the vibratory torque. In this paper, the elastic dynamic characteristics of coupling with rubber type circular segments is confirmed by the theoretical analysis using the FEM and the hydraulic exciting test at shop. And its adaptation is investigated in the torsional vibration test in factory shop.