• Title/Summary/Keyword: Primary hole

Search Result 102, Processing Time 0.023 seconds

A Study of Residual Stress Measurement in the Weld of Nuclear Materials (원전재료 모재 및 용접부 잔류응력측정 연구)

  • Lee, Kyoung-Soo;Lee, Jeong-Keun;Lee, Seong-Ho;Park, Jae-Hak
    • Transactions of the Korean Society of Pressure Vessels and Piping
    • /
    • v.7 no.1
    • /
    • pp.9-16
    • /
    • 2011
  • Primary water stress corrosion cracking (PWSCC) has been found in the weld region of the nuclear power plant. Welding can produce tensile residual stress. Tensile residual stress contributes to the initiation and growth of PWSCC. It is important to estimate weld residual stress accurately to predict or prevent the initiation and growth of PWSCC. This paper shows the results of finite element analysis and measurement experiment for weld residual stress. For the study, four kinds of specimen were fabricated with the materials used in the nuclear power plant. Residual stresses were measured by four kinds of methods of hole drilling, x-ray diffraction, instrumented indentation and sectioning. Through the study, numerical analysis and measurement results were compared and the characteristics of each measurement technique were observed.

An Experimental Study on Flow Characteristics in Volute of Centrifugal Turbomachinery (원심형 터보기계의 볼류트네의 유동특성에 관한 실험적 연구)

  • Jeon, Kyung-Joon;Joo, Won-Gu
    • Proceedings of the KSME Conference
    • /
    • 2001.06e
    • /
    • pp.801-806
    • /
    • 2001
  • The objective of present study is to find the interaction between volute and impeller of the centrifugal turbomachinery with rectangular cross-sectional volute. Flow measurement were taken in shrouded impeller with 12 backward type blades by using a five-hole pressure probe. The measurements are carried out in 7 flow rate, respectively. Primary function of a centrifugal turbo machinery volute is to serve the flow from the impeller and diffuser to pipe system. For the off-design conditions, Influence of pressure distortion was shown by these measurements. As a result, It has caused the decrease of total efficiency of centrifugal turbomachinery. We have also taken data to design volute by these measurements.

  • PDF

BLACK HOLE-IGM FEEDBACK, AND LINKS TO IGM FIELDS AND CR'S

  • KRONBER PHILIPP P.
    • Journal of The Korean Astronomical Society
    • /
    • v.37 no.5
    • /
    • pp.501-507
    • /
    • 2004
  • The uniquely large dimensions of Giant radio galaxies (GRGs) make it possible to probe for stringent limits on total energy content, Faraday rotation, Alfven speeds, particle transport and radiation loss times. All of these quantities are more stringently limited or specified for GRG's than in more 'normal' FRII radio sources. I discuss how both global and detailed analyses of GRG's lead to constraints on the CR electron acceleration mechanisms in GRG's and by extension in all FRII radio sources. The properties of GRG's appear to rule out large scale Fermi-type shock acceleration. The plasma parameters in these systems set up conditions that are favorable for magnetic reconnection, or some other very efficient process of conversion of magnetic to particle energy. We conclude that whatever mechanism operates in GRG's is probably the primary extragalactic CR acceleration mechanism in the Universe.

Evaluation of Structural Integrity for HANARO Capsule Structure by Vibration Test and Analysis (진동시험 및 해석을 통한 하나로 캡슐 구조물의 구조건전성 평가)

  • 이영신;강연환;최명환;신도섭
    • Journal of KSNVE
    • /
    • v.10 no.2
    • /
    • pp.261-268
    • /
    • 2000
  • The instrumented capsule is subjected to flow-induced vibration(FIV) due to the flow of the primary coolant and then the structural integrity of the capsule during irradiation in the HANARO reactor is an issue of major concern. For this purpose the acceleration was measured by four accelerometers attached to the protection tube of the capsule mainbody and the displacement of test holes was calcultated using commercial finite element program ANSYS to evaluate the structural interference with the neighboring flow tubes under the reactor operating condition. The calculated displacements of test holes in the reactor in-core were found to be lower than the values of allowable design criteria.

  • PDF

Elementary Students' Perceptions of Earth Systems and Environmental Issues

  • Lee, Hyon-Yong;Fortner, Rosanne W.
    • Journal of the Korean earth science society
    • /
    • v.27 no.7
    • /
    • pp.705-714
    • /
    • 2006
  • The purpose of this study was to explore the elementary students' perceptions of Earth systems and environmental issues. A survey was conducted to determine the students' perceptions on the following aveas: (1) the concepts of certainty and tangibility, (2) self-reported knowledge level, (3) perceived danger level of selected eight Earth systems and environmental issues, and (4) their primary information source on these issues. Results indicated that ozone hole, acid rain, El $Ni\widetilde{n}o$, and global warming were identified by the students as uncertain and intangible issues. Perceived certainty and perceived tangibility were highly positively correlated with self-reported knowledge compared to other relationships. The results also showed that learning from school was the most frequent information source for environmental issues. The second most frequently used source of information was television among several mass media sources. It is hoped that this study contributes to understanding the elementary school students' perceptions toward the selected Earth systems and environmental issues.

Numerical Simulation for Model Gas Turbine Combustor (모형 가스터빈 연소기의 수치해석적 연구)

  • 김태한;최병륜
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.18 no.7
    • /
    • pp.1789-1798
    • /
    • 1994
  • This paper aimed for numerical simulation of complicated gas turbine combustor with swirler. For the convenience of numerical analysis, fuel nozzle and air linear hole areas of secondary and dilution zone, which are issued to jet stream, were simplified to equivalent areas of annular type. In other to solve these problems, imaginary source terms which are corresponded to supplied fuel amount were added to those of governing equation. Chemical equilibrium model of infinite reaction rate and $k-{\epsilon}-g$ model with the consideration of density fluctuation were applied. As the result, swirl intensity contributed to mixing of supplied fuel and air, and to speed up the flame velocity than no swirl condition. Temperature profiles were higher than experimental results at the upstream and lower at the downstream, but total energy balance was accomplished. As these properties showed the similar trend qualitatively, simplified simulation method was worth to apply to complicated combustor for predicting combustion characteristics.

Visual Quality Optimization for Privacy Protection Bar-based Secure Image Display Technique

  • Park, Sanghyun;Kang, Sang-ug
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • v.11 no.7
    • /
    • pp.3664-3677
    • /
    • 2017
  • Abrupt scene changes generally incur the afterimage effect. So, the unblocked image portion is still viewed by human eyes just after it is blocked by some pattern. Yovo's secure display method utilized this phenomenon and it is systematically analyzed using computational afterimage modeling by replacing the complex afterimage effect via simple low-pass filtering. With this approach, realistic images perceived by the human eye can be computationally generated at every single moment, especially reflecting the afterimage effect. The generated images are compared with the original images to determine the factors that affect the image quality of the secure display method. The simulation results demonstrate that the ratio of the unblocked portion to the blocked portion of an image and the playback rate are two primary factors related to the recognized image quality. We also found that the two factors are still effective for generalized secure display techniques.

A Study on the Prediction of Fatigue Crack Initiation Life of Hole Expansion Plate (홀 확장 판재의 피로균열 발생수명 예측에 관한 연구)

  • 이동석;이준현
    • Journal of the Korean Society for Precision Engineering
    • /
    • v.20 no.2
    • /
    • pp.129-135
    • /
    • 2003
  • The fatigue life of a structure can be enhanced by improving the mechanical and metallurgical aspects to strengthen the material around regions of high stress. Coldworking of holes in structures is one of the mechanical methods of strengthening material. The material for this research is A12024-T351 which is used for the primary member or aircraft. Specimens were tested under constant amplitude loading and residual stresses measured by X-ray diffraction technique. Fatigue crack initiation life was evaluated by a strain-life equation which was considered initial residual stress and residual stress relaxation exponent as a function of the strain amplitude. The predictions on fatigue crack initiation life were compared with experimental results. A wide range of discrepancies between them was found.

Characteristics of flow-induced vibration for inner assembly of in-pile test section (노내시험부 내부집합체에 대한 유체유발진동특성)

  • Lee, Han-Hee;Lee, Jong-Min;Lee, Chung-Young
    • Proceedings of the Korean Society for Noise and Vibration Engineering Conference
    • /
    • 2006.05a
    • /
    • pp.250-253
    • /
    • 2006
  • The in-pile Section (IPS) is subjected to flow-induced vibration(FIV) due to the flow of the primary coolant and then the structural integrity. The in-pile Section (IPS) of 3-pin Fuel Test Loop(FTL) shall be installed in the vortical hole call IR1 of HANARO reactor core. In order to verify the velocity and displacement both the inside region of IPS at the annular region of IPS, the vibration was measured by varing the flow rate on both regions. The displacements of fuel assembly in the in-pile Section (IPS) were found to be lower than the values of allowable design criteria.

  • PDF

EVALUATION OF CONSERVATIVE TREATMENT BETWEEN AMALGAM FILLING AND STAINLESS STEEL CROWN IN PRIMARY TEETH. (乳齒(유치)에 있어서 Stainless steel crown Amalgam과 充塡(충전)과의 비교연구(比較硏究))

  • Woo, Won-Sup
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.4 no.1
    • /
    • pp.35-38
    • /
    • 1977
  • The study was performed to evaluate effects of Conservative treatment between amalgam filling and stainless steel crown. The selected subjects for this study was 350 children who have amalgam filling or stainless steel crown. The obtained results are as followings. 1. In amalgam filling teeth, 120 teeth (60.0%) showed marginal leakage, 57 teeth (28.5%) showed fracture of filling material and 28 teeth (14.0%) teeth showed periapical lesion. 2. In crowned teeth, 6 teeth (3.0%) showed hole on the surface of crown, 29 teeth (14.5%) showed avulsion of crown and 10 teeth (5.0%) showed periapical lesion. 3. After 12 months from examining date, 69 teeth (34.5%) showed sound condition in amalgam filling teeth and 155 teeth (75.2%) showed sound condition in crowned teeth.

  • PDF