• Journal of the Korean Society of Safety
• /
• v.25 no.6
• /
• pp.86-91
• /
• 2010

The purpose of this study is to analyze the damage patterns and metal structure of 3 phase mold transformers collected from places where accidents have occurred. Compared to an oil-immersed transformer, a mold transformer has the advantage of requiring a smaller installation area and can be kept clean, while its disadvantages include the fact that abnormal symptoms of an accident are difficult to discover and its repair is impossible. The capacity of the mold transformers collected from places where accidents have occurred was 200kVA with primary voltages being F23,900V, R22,900V, 21,900V, 20,900V, 19,900V, etc., as well as secondary voltages being 380V, 220V, etc. It was found from the analysis on the diffusion of combustion in the damaged mold transformers that fire occurred first inside the U-phase primary winding and that carbonization and heat were diffused to V-phase and W-phase in V-pattern. In addition, from the analysis on the cross-sectional structure of the metal of the melted high voltage winding using a metallurgical microscope, it was found that the boundary surface, voids, and columnar structure were formed when an interlayer short-circuit had occurred Therefore, even though it is not possible to find the cause for the occurrence of an interlayer short-circuit at the inner side of the primary winding, it is thought that, due to the thermal energy generated when the short-circuit occurred, the heat source was diffused to the upper side and outside, causing a secondary accident.

• Journal of Environmental Science International
• /
• v.19 no.1
• /
• pp.69-80
• /
• 2010

Today's fundamental purpose of environmental education is to fulfill people's desire of living in a pleasant environment and at the same time promoting individualistic and collective environmentally friendly behaviors. In order to achieve these purposes, it is very important that each person holds an environmentally friendly mind that constantly tries to preserve and protect the environment which should be acquired through experiencing the importance of the environment. In order to increases the sense of attachment of people and the natural environment, the direction of environmental education should carry out education on environment related knowledge and the condition of environment damage side by side. The direction of environmental education should consider the cultivating student's awareness for active participation on matters related to the environment and to change their behaviors towards the environment. This study has tested the effect of reflective writing activities about the environment on the environmental sensitivity and willingness to act of 5th grade primary school students. For the sole purpose of this study, 70 students out of 141 5th graders of M Primary School were divided as the experimental group, and another 71 students were divided as the control group. The experimental group participated in 10 activities in where they were asked to express their thoughts and feelings in writing regarding 10 environmental problems occurring near the M Primary School. The control group participated in 10 environmental education lectures focusing on the lecturer. The results were as following. First, the reflective writing activities about the environment were effective in the environmental sensitivity of primary school students. Second, the reflective writing activities about the environment can affect the environmental willingness to act of primary school students. Third, there was a statistically significant correlation between environmental sensitivity and environmental willingness to act.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.47 no.2
• /
• pp.99-105
• /
• 2021

This study was conducted to identify the efficacy related to skin barrier functions such as anti-inflammatory, anti-allergic, cornified envelope formation and the alleviation effect of keratinocyte damage caused by S. aureus using the callus extract, which was induced and extracted from the leaves of Gynostemma pentaphyllum in Ulleungdo Island. In order to confirm the anti-inflammatory effect of the G. pentaphyllum callus extract on the skin, the expression of inflammatory cytokines was investigated in primary epidermal keratinocytes (HEKa) activated with PAR-2 agonist, and the G. pentaphyllum callus extract showed IL-8, IL-25, and TSLP production inhibitory effect. β-Hexosaminidase assay using RBL-2H3 cells was performed to confirm the anti-allergic efficacy, and G. pentaphyllum callus extract showed the effect of inhibiting the release of β-hexosaminidase. In addition, G. pentaphyllum callus extract showed the cornified envelope formation effect in HaCaT cells, and through the co-culture experiment with HaCaT cells and S. aureus, it showed alleviation effect of keratinocyte damage caused by S. aureus. Therefore, G. pentaphyllum callus extract is considered to be a useful cosmetic material for improving skin barrier with anti-inflammatory, anti-allergic and alleviation effect of keratinocyte damage caused by S. aureus.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.6
• /
• pp.1274-1279
• /
• 2011

The purpose of this paper is to present the manufacturing defect and damage pattern of a 3 phase 22.9/3.3kV oil immersed transformer, as well as to present an objective basis for the prevention of a similar accident and to secure data for the settlement of PL related disputes. It was found that in order to prevent the occurrence of accidents to transformers, insulating oil analysis, thermal image measurement, and corona discharge diagnosis, etc., were performed by establishing relevant regulation. The result of analysis performed on the external appearance of a transformer to which an accident occurred, the internal insulation resistance and protection system, etc., showed that most of the analysis items were judged to be acceptable. However, it was found that the insulation characteristics between the primary winding and the enclosure, those between the ground and the secondary winding, and those between the primary and secondary windings were inappropriate due to an insulating oil leak caused by damage to the pressure relief valve. From the analysis of the acidity values measured over the past 5 years, it is thought that an increase in carbon dioxide (CO2) caused an increase in the temperature inside the transformer and the increase in the ethylene gas increased the possibility of ignition. Even though 17 years have passed since the transformer was installed, it was found that the system's design, manufacture, maintenance and management have been performed well and the insulating paper was in good condition, and that there was no trace of public access or vandalism. However, in the case of transformers to which accidents have occurred, a melted area between the upper and the intermediate bobbins of the W-phase secondary winding as well as between its intermediate and lower bobbins. It can be seen that a V-pattern was formed at the carbonized area of the transformer and that the depth of the carbonization is deeper at the upper side than the lower side. In addition, it was found that physical bending and deformation occurred inside the secondary winding due to non-uniform pressure while performing transformer winding work. Therefore, since it is obvious that the accident occurred due to a manufacturing defect (winding work defect), it is thought that the manufacturer of the transformer is responsible for the accident and that it is lawful for the manufacture to investigate and prove the concrete cause of the accident according to the Product Liability Law (PLL).

• Korean journal of applied entomology
• /
• v.55 no.4
• /
• pp.483-487
• /
• 2016

The damage of citrus fruits caused by Scirtothrips dorsalis Hood has being increased in Jeju, Korea. The seasonal abundance of S. dorsalis and its injury symptoms in citrus orchards have been studied since the endemic outbreak in Jeju, but studies for the occurrence pattern of S. dorsalis in citrus orchards influenced by adjacent primary hosts have not been fully conducted yet. We selected kiwi- and mango-citrus adjacent orchards to study the migration pattern of S. dorsalis toward to citrus orchards. Yellow-colored sticky traps were used for monitoring the seasonal abundance of S. dorsalis and their migration pattern in two orchards. In citrus orchards, also, we placed sticky traps at 0, 5, 10, 15 and 20 m apart from the border of kiwi orchard, and 0, 7 and 20 m apart from the border of mango orchard. The seasonal occurrence pattern of S. dorsalis caught on sticky traps were similar between two adjacent orchards. However, the abundances in kiwi or mango orchard was much higher than those of citrus. Also, it was found that densities, distribution and damage of S. dorsalis in citrus orchards depend highly on the distance from the border of kiwi and mango orchards. This result suggested that the primary hosts such as kiwi and mango plants influence the occurrence of S. dorsalis in adjacent citrus orchards. And this information may provide a basic direction for establishing the management strategy of S. dorsalis in citrus orchards.

• The Plant Pathology Journal
• /
• v.18 no.4
• /
• pp.210-215
• /
• 2002

Four field experiments were carried out from 1998 to 1999 and from 1999 to 2000 growing seasons of potato to investigate the relationship between leafminers and Alternaria alternata. The experiments established differential susceptibility among potato varieties to alternaria leaf necrosis, relationship between leafminer infestation and the level of necrosis, use of insecticides to reduce leafminer and leaf necrosis damages, and use of polyester fleece to eliminate leafminer and eventually reduce leaf necrosis. Results of the study indicate that control of leafminer is of primary importance because this will automatically lead to control of the damage caused by A. alternata.

• Asian-Australasian Journal of Animal Sciences
• /
• v.11 no.4
• /
• pp.434-440
• /
• 1998

Seven hybrid lines of Leucaena leucocephala $\times$ L. diversifolia and two control lines of L. leucocephala were compared for their adaptation to acid-soils and tolerance to damage by the psyllid, Heteropsyla cubana, at four locations over two years in Peninsular Malaysia. Primary data on leaf composition and in vitro digestibility (nutrition variables) and secondary data on plant height, stem girth and psyllid damage (agronomy variables) were the measures of performance. Cluster solutions of the nine lines were different within locations, between locations and between years for nutrition and agronomy variables. Controls and hybrids did not cluster separately. Principal component scores of the nine lines gave rank orders which were different by location and by year. No performance trend could be detected between hybrids and controls. The conclusion is that nutritional and agronomic characteristics in Leucaena are independent, soil composition and weather did not consistently affect performance, and evidence is inconclusive as to the benefits of interspecific crossing with L. diversifolia.

• Tribology and Lubricants
• /
• v.15 no.3
• /
• pp.272-277
• /
• 1999

The objective of this investigation is to examine the influence of the micro catheters, which mimic the intravascular micro active endoscopes, on local pressure changes and flow rate in an arterial branch model similar to the femoral artery of human. The effects of branch to main lumen flow rate ratios and the locations of a catheter tip were found to be significant on the local pressure changes. Relatively large pressure drops and an increase in shear stress due to the obstruction effects may induce an endothelial cell damage and a change in arterial wall permeability, which have been reported to be the primary cause of the initiation of the atherosclerosis and other major vascular diseases.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.05a
• /
• pp.245-249
• /
• 2001

This paper is concerned with numerical analyses for bulk forming of a single crystal milli-product, whose typical size ranges from a few hundreds ${\mu}m$ to a few mm. The numerical formulation invoked in this paper combines the crystal plasticity theory considering texture development and the ductile damage mechanics for growth of micro voids, since orientation development and growth of micro voids become the primary factors for bulk forming of milli-size products. As applications, milli-extrusion of a single crystal round bar and milli-rolling of a single crystal plate are simulated and the results are discussed in detail.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.6
• /
• pp.16-23
• /
• 2013

It is important that proving ground damage is correlated with target customer usage. This paper describes the test mode for durability test of active suspension control system for proving ground correlation and optimization. Acceleration, strain, wheel force and other types of data are collected on a vehicle as it traverses different proving ground surfaces. The primary objective of the analysis is to determine which mixture of proving ground surfaces offers the best representation of customer usage while minimizing the total test time. And durability testing offers the best way to assess the capability of a product to reach its reliability target. The test should be representative of the real environmental load and replicate the same customer usage.