• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.646-651
• /
• 2001

The present study is an experimental work of the sonic/supersonic air ejector-diffuser system. The pressure-time dependence in the secondary chamber of this ejector system is measured to investigate the steady operation of the ejector system. Six different primary nozzles of two sonic nozzles, two supersonic nozzles, petal nozzle, and lobed nozzle are employed to drive the ejector system at the conditions of different operating pressure ratios. Static pressures on the ejector-diffuser walls are to analyze the complicated flows occurring inside the system. The volume of the secondary chamber is changed to investigate the effect on the steady operation. the results obtained show that the volume of the secondary chamber does not affect the steady operation of the ejector-diffuser system but the time-dependent pressure in the secondary chamber is a strong function of the volume of the secondary chamber.

• Structural Engineering and Mechanics
• /
• v.50 no.2
• /
• pp.151-161
• /
• 2014

In this paper, fuel tank of the locomotive ER 24 has been studied. Firstly the behavior of fuel and air during the braking time has been investigated by using a two-phase model. Then, the distribution of pressure on the surface of baffles caused by sloshing has been extracted. Also, the fuel tank has been modeled and analyzed using Finite Element Method (FEM) considering loading conditions suggested by the DIN EN 12663 standard and real boundary conditions. In each loading condition, high stressed areas have been identified. By comparing the distribution of pressure caused by sloshing phenomena and suggested loading conditions, optimization of the tank has been taken into consideration. Moreover, internal baffles have been investigated and by modifying their geometric properties, search of the design space has been done to reach the optimal tank. Then, in order to reduce the mass and manufacturing cost of the fuel tank, Non-dominated Sorting Genetic Algorithm (NSGA-II) and Artificial Neural Networks (ANNs) have been employed. It is shown that compared to the primary design, the optimized fuel tank not only provides the safety conditions, but also reduces mass and manufacturing cost by %39 and %73, respectively.

• International Journal of Internet, Broadcasting and Communication
• /
• v.10 no.1
• /
• pp.1-10
• /
• 2018

In cognitive radio (CR), secondary users (SUs) are able to sense the absence of primary users (PUs) in the spectrum. Then, SUs use this information to opportunistically access the licensed spectrum in the PUs' absence. In this paper, we present an implementation of real-time video transmission with spectrum-sensing between two points using GNU Radio and a National Instruments 2900 Universal Software Radio Peripheral (USRP). In our project, spectrum-sensing is implemented at both transmitter and receiver. The transmitter senses the channel, and if the channel is free, a video signal (which could be a real-time signal from a video file) will be modulated and processed by GNU Radio and transmitted using a USRP. A USRP receiver also senses the channel, but in contrast, if the channel is busy, the signal is demodulated to reproduce the transmitted video signal. This project brings in several challenges, like spectrum-sensing in the devices' environment, and packets getting lost or corrupted over the air.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.1343-1347
• /
• 2009

In order to comply with the global energy crisis and environment problem, it is necessary to research and develop the energy utilization technology with the reduction of the primary energy usage. Although the increasing rate of energy consumption started to attenuate, the entire consumption of energy as well as $CO_2$ emission rate tends to increase steadily along with an economic growth in Korea. The energy demand in Korea increases by annual 3.7% during the period from 2000 to 2006. And it is expected that we should take a charge of the greenhouse gas reduction obligation by the Climatic Change Convention(Kyoto Protocol) during the 2nd pledge period($2013{\sim}2017$). According to the IEA report in 2005, the emission amount of carbon dioxide is the 10th place in the world, and the increasing rate is 4.7% annually. Considering the economic scale of Korea, the degradation of energy usage is inevitable when the greenhouse gas reduction obligation come into effect. Therefore, effective energy usage is a very important issue to minimize baneful influence on industrial and economic activities.

• Textile Coloration and Finishing
• /
• v.11 no.2
• /
• pp.27-37
• /
• 1999

Polypropylene(PP) films were treated with plasma glow discharge to produce peroxy radicals on the surfaces. The peroxy radicals formed on the PP film surfaces were subsequently used for the graft polymerization of acrylic acid and acrylamide in an aqueous solution by heating, respectively. Introduction of acrylic acid and acrylamide on the PP film could be confirmed by the observation of carbonyl and primary amine absorptions based on carboxylic acid and amide, respectively. And introduction of functional group could be confirmed by weight analysis and ESCA. The water contact angle(90$^{\circ}$) of PP film was constant, irrespective of elapsed time, while plasma-treated and functional monomer-grafted PP films were slowly increased with elapsed time, showing the rearrangement of surface polar groups in air condition. The water contact angle$(90^\circ)$ of PP film was decreased by the plasma treatment$(56^\circ)$ and further decreased by the grafting of acrylic acid$(34^\circ)$ and acrylamide$(37^\circ)$, indicating increased hydrophilicity of the modified surfaces. The water contact angle of plasma-treated PP film increased a little as time elapsing. The half-life periods of surface voltage on acrylic acid-(31sec) and acrylamide-grafted PP(42sec) were significantly decreased when compared to those on PP(950sec) and plasma-treated PP film(241sec). In the experiments using acid, basic and disperse dyes, absorbance and $\Delta{E}$ values of functional monomer-grafted PP films were significantly increased than that of oxygen plasma-treated one.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.12 no.2
• /
• pp.83-94
• /
• 2009

Environmental pollution becomes a serious problem in urban areas. Moreover, densely constructed strictures can be problematic to cities due to the rising temperature they cause as well as the increasing accumulation of air pollutants they generate by interrupting airflow. In order to improve residential amenity, it is necessary to improve the thermal environment by preserving wind corridors. To do so requires consideration to important aspects such as building arrangement, scale, vegetation, and land cover, which all have an effect on wind corridors. In this study, a typical arrangement-complex, which is the primary form of housing in Korea, was selected as a case ENVI-met. As a result of empirical analysis, the optimal apartment-complex arrangement that is most suitable for mitigating urban heat-islands phenomenon was determined, The outcome of this study can be utilized as a planning technique for apartment-complex construction in consideration to type of buildings, scale of buildings, and land cover.

• Korean Journal of Organic Agriculture
• /
• v.17 no.2
• /
• pp.253-264
• /
• 2009

This study was conducted to establish agricultural practices to control diseases and insects for chemical pesticide-free cultivation of leafy vegetables. Two diseases, gray mold(Botrytis cinerea) and soft rot(Erwinia carotovora), on lettuce were reduced by controlling temperature and humidity using air-circulation fan. The aphidophagous lady beetle(Harmonia axyridis) and primary parasitoids(Aphidius colemani) showed activity to control aphids density on Chinese cabbage. Co-application of cooking oil and yolk mixture (COY) and BT(Bacillus thuringiensis) decreased diseases including soft rot(Erwinia carotovora), downy mildew(Peronospora brassicae Gaumann), and powdery mildew(Eryslphe polygoni), and insects such as diamondback moth(Plutella xylostella) and beet armyworm(Spodoptera exigua Hubner). Neem extract treatment reduced downy mildew(Peronospora destructor) on Welsh onion.

• 한국전산유체공학회:학술대회논문집
• /
• 1996.05a
• /
• pp.85-92
• /
• 1996

Numerical simulations are made for the three-dimensional flow around a wing in ground effect craft haying the complex geometry. A numerical tool is developed for the primary design of hull and wing shape of practical Wing-In-Ground effect(WIG) stop. The finite-difference method is utilized to descretize the governing equations and pressure field is obtained by using Marker-And-Cell(MAC) method. The air and water flows are simultaneously simulated in the time-marching solution procedure for the Navier-Stokes equation. The porosity technique and the density function are devised for the implementation of the three-dimensional body-boundary and the free-surface conditions, respectively. In this paper, a craft is modeled simply by three blocks containing a wing mounted on a main body horizontally, with the endplate. The numerical calculations of a WIG advancing in a calm water are performed and the WIG-generated wave profiles are also obtained. In the final paper, details of the numerical methods employed for the present study and calculated results are discussed.

• Journal of computational fluids engineering
• /
• v.17 no.3
• /
• pp.33-38
• /
• 2012

The droplet ejection behavior from drop-on-demand printhead are investigated numerically for Newtonian and shear-thinning fluid. The numerical simulation is performed using a volume-of-fluid model. In this study, we compare the printable range in terms of Z number and pinch-off time for Newtonian and shear-thinning fluids. The printability range are found to be 1.08 $$\leq_-$$ Z $$\leq_-$$ 12.9 for Newtonian fluid and 0.8 $$\leq_-$$ Z $$\leq_-$$ 12.9 for shear-thinning fluid. However, air entrainment is observed during merging of primary and satellite droplet within the printability range. The pinch-off time of the shear-thinning fluid is apparently shorter compared to the corresponding Newtonian fluid due to shear-thinning effects and the differences in the pinch-off time is enlarged significantly when the capillary number is larger than 0.5.

• Journal of Advanced Marine Engineering and Technology
• /
• v.21 no.4
• /
• pp.437-442
• /
• 1997

An experimental study was carried out in a channel cavity with square heat surface by visual¬ization equipment with Mach - Zehnder interferometer and laser apparatus. The image processing system consists of one commercial image board slit into a personal computer and 2-dimensional sheet light by Argon-Ion Laser with cylindrical lens and flow picture recording system. Instant simultaneous velocity vectors at whole field were measured by 2-D PIV system which adopted two¬frame grey-level cross correlation algorithm. Heat source was uniform heat flux(o.4W/cm$^2$, , O.8W/cm$^2$, 1.2W/cm$^2$). Obtained result showed various flow patterns such as kinetic energy distribution. Severe unsteady flow fluctuation within the cavity are remarkable and sheared mixing layer phenomena are also found at the region where inlet flow is collided with the counter-clockwise rotating main primary vortex. Photographs of Mach ~ Zehnder are also compared in terms of constant heat flux.