• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.49 no.6
• /
• pp.299-306
• /
• 2000

The primary cause of air pollution by vehicles is imperfect combustion of fuel. One of the most usual causes of this imperfect combustion is the misfire in IC(Intenal Combustion) engine. Recently it is obligated for an ECU to monitor the emission level and warn the driver in case of exceeding specified emission standards. Therefore, in order to comply with this OBD-II regulations, car makers are investing a considerable amount into technology which would enable the detection of misfire and the particular cylinder in which misfire is taking place. So far, it has been able to detect misfire using engine speed, which can be obtained crank angle. However, such a method posed a problem in analyzing at high speed and in recognizing the misfire from the load impact at bumpy road. In this paper, misfire detection is made possible by simple arithmetic using WDFT, especially at high engine speed. In addition, the moving window method of a Walsh function is applied to determine the cylinders under misfire in case of multiple misfires. An actual experiment was conducted to prove that WDFT is applicable to effective in computation speed and to same result in misfire detection and cylinder determination at idle, part load and bumpy road conditions.

• Journal of Chest Surgery
• /
• v.10 no.1
• /
• pp.17-24
• /
• 1977

The present treatment of respiratory failure, using cuffed endotracheal and tracheostomy tube has produced, apparently with increasing frequency, three lesions which have serious ceminical manifestations such as tracheal stenosis, tracheomalasia, and localized tracheal erosion. Extensive resection and reconstruction of the trachea must be necessary because conservative treatment has generally failed in the fully developed stenotic lesion. of the mediastinal trachea following extensive resection is best accomplished by direct anastomosis of the patient`s own tracheobronchial tissue. Any replacement of the mediastinal trachea must be air tight and laterally rigid, and must heal dependably. A variety of materials has been used for substitution following circumferential excision of tracheal segments within the mediastinum. These attempts have often failed because of early leak or late stenosis. We have successfully performed circumferential resection and primary end-to-end anastomosis of the trachea for 4 cases of post-intubation tracheal stenosis located a few centimeter below the tracheostomy stoma in the period of 3 years between 1974 and 1976. The lesion in one patient was found in the upper trachea which was approached anteriorly through a cervicomediastinal incision with division of the upper sternum. Other three located in the lower half of the trachea were operated through a high transthoracic incision with appropriate hilar mobilization in addition to cervical flexion for the development of the cervical trachea into the mediastinum. There were no hospital death, but suture line granulations occurred in two patients were managed by bronchoscopic removal of granulations without difficulties.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.12
• /
• pp.1220-1225
• /
• 2010

This paper proposes a novel active noise control (ANC) approach that uses an IIR filter and neural network techniques to effectively reduce interior noise. We construct a multiple-channel IIR filter module which is a linearly augmented framework with a generic IIR model to generate a primary control signal. A three-layer perceptron neural network is employed for establishing a secondary-path model to represent air channels among noise fields. Since the IIR module and neural network are connected in series, the output of an IIR filter is transferred forward to the neural model to generate a final ANC signal. A gradient descent optimization based learning algorithm is analytically derived for the optimal selection of the ANC parameter vectors. Moreover, re-estimation of partial parameter vectors in the ANC system is proposed for online learning. Lastly, we present the results of a numerical study to test our ANC methodology with realistic interior noise measurement obtained from Korean railway trains.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.93-96
• /
• 2009

Advances in high speed flight technologies and engine efficiencies increase heat load on the aircraft. As the temperature of air flow is too high to cool the structure at hypersonic flight speeds, it is necessary to utilize the aircraft fuel as the primary coolant. By undergoing endothermic reaction, such as thermal decomposition or catalytic decomposition, aircraft fuels have heat sink potential. These fuels are called endothermic fuels. The endothermic reaction can be improved by catalysts, but limited by coke deposition. In this study the essential technologies of endothermic fuels are described, and intended to be used for basic research.

• International Journal of Concrete Structures and Materials
• /
• v.1 no.1
• /
• pp.29-36
• /
• 2007

The purpose of this paper is the assessment of the capacity of the reinforced concrete (RC) elements of an arch bridge when they are subjected to contact and near-contact explosive charges of various amounts, and the estimation of the critical charges for these components. The bridge considered is the Tenza Viaduct, a decommissioned structure south of Naples, Italy. Its primary elements, deck, piers and arches were analyzed. The evaluation was accomplished via numerical analyses that made possible to obtain the elements dynamic response when they are exposed to blast loading conditions. To evaluate the member's capacities, failure criteria for deck, piers and arches were proposed based on concrete damage parameters. Additionally, curves relating the explosive charge to the residual capacity and to damage level of the elements were also developed. The results of this work were taken into account to investigate the progressive collapse of the global structure.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.565-568
• /
• 2008

Because of low early compressive strength, the usage of fly ash is subject to restriction in comparison with blast-furnace slag powder. Therefore, high amount of fly ash is reclaimed in landfill in face of better economical efficiency and more production. In this paper, the primary aim is to determine to what the basic material characteristics of fly ash concrete is affected by activator, the second aim is to check a possibility of increase in fly ash application. This study show that compared with fly ash concrete using general admixture, fly ash concrete using activator have higher early compressive strength under similar slump, air content, loss. If additional study will inspect performance of activator in various factor, expansion of application of fly ash concrete using activator can be possible.

• KIEAE Journal
• /
• v.11 no.1
• /
• pp.39-45
• /
• 2011

The concepts of interior design work have set forward an aesthetic and functional proposition to be answered by those who design spaces. The available range of suitable materials for interior use appears to be almost inexhaustible in this day and age. Now a day, relatively new fields of study on environmental-friendly interior examine humans'innate affinity for health and explore its implications for architecture and the built environment. A growing field of research suggests that spaces' relationship to aesthetics and environment can either help or hinder their occupants' health and wellness, productivity, and even their creativity. This paper presents several examples of already built apartment houses in practice, and discusses the demand of users of the spaces for health and sustainable environment, deepening the relationship between newly-constructed spaces and the remodeled ones. The considerations to some new and contemporary materials from the aspect of healthy indoor architecture design are presented in this paper. Designers need to rethink the conventional and high-tech interior environment in apartment houses with respect to perceived air quality, material emissions, and odors. The future of interior design is oriented on light shapeable materials which are able to create a unique memorable atmosphere. The primary assignment in accepting recent materials and proceedings is our responsibility to creating proposals, that are mainly safe, hygienic and environmentally proper.

• Journal of Ecology and Environment
• /
• v.35 no.3
• /
• pp.157-166
• /
• 2012

Many models intending to explain the latitudinal gradient of increasing species diversity from the poles to the equator are presented, which are a formalisation of the species-energy hypothesis. The model predictions are consistent with patterns of increasing species number with increasing mean air or water temperatures for plants and animals. An increase in species richness is also correlated with net primary production or the Normalised Difference Vegetation Index. This implies that increased availability of resources favours increased diversity capacity. The explanatory variables included in the biodiversity prediction models represent measures of water, energy, water-energy, habitat, history/evolution and biological responses. Water variables tend to be the best predictors when the geographic scope of the data is restricted to tropical and subtropical areas, whereas water-energy variables dominate when colder areas are included. In major models, about 20-35% of species in the various global regions (European, Africa, etc.) will disappear from each grid cell by 2050 and >50% could be vulnerable or threatened by 2080. This study provides good explanations for predictive models and future changes in biodiversity depending on various scenarios.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2003.10a
• /
• pp.1-2
• /
• 2003

While aromatic polyimides and polyamides have found widespread use as high performance polymers, the present work addressed the need for organosoluble materials through the use of a hyperbranching scheme. The $AB_2$ monomers were prepared. The $AB_2$ monomers were then polymerized via aromatic fluoride-displacement and Yamazaki reactions to afford the corresponding hydroxyl-terminated hyperbranched polyimides (HT-PAEKI) and amine-terminated hyperbranched polyamides, respectively. HT-FAEKI was then functionalized with allyl and propargyl bromides as well as epichlorohydrin to afford allyl-terminated AT-PAEKI, propargyl-terminated PT-PAEKI, and epoxy (glycidyl)-terminated ET-PAEKI, in that order. All hyperbranched poly(ether-ketone-imide)s were soluble in common organic solvents. AT-PAEKI was blended with a bisphenol-A-based bismaleimide (BFA-BMI) in various weight ratios. Thermal, rheological, and mechanical properties of these blend systems were evaluated. Two characteristic hyperbranched polyamides, which the one has para-electron donating groups to the surface amine groups and the other has para-electron withdrawing groups to the surface amine groups, were selected to compare BMI curing behaviors. The electron rich polymer displayed ordinary Michael addition type exothermic reaction, while electron deficient polymer did display unusual curing behaviors. Based on analytical data, the later system provided the strong evidences to support room temperature curing of BMI by reactive intermediates instead of reactive primary amine groups on the macromolecule surface.

• Molecular & Cellular Toxicology
• /
• v.2 no.4
• /
• pp.229-235
• /
• 2006

Volatile organic compounds (VOCs) are a major component of urban air pollution. It is documented that low exposure levels of VOCs induce alterations in immune reactivity resulting in a subsequent higher risk for the development of allergic reactivity and asthma. Despite these facts, there are few reports on the affected primary target and the underlying effective causal mechanisms. So in this study, to better understand the risk of BTX (benzene, toluene and o-xylene) which are the major VOCs and to identify novel biomarkers on immune response to these VOCs exposure in human T lymphocytes, we performed the toxicogenomic study by analyzing of gene expression profiles using 35 k human oligo-microarray. BTX generated specific gene expression patterns in Jurkat cell line. By clustering analysis, we identified some genes as potential markers on immuno-modulating effects of BTX. Four genes of these, HLA-DOA, ITGB2, HMGA2 and 5TAT4 were the most significantly affected by BTX exposure. Thus, this study suggests that these differentially expressed immune genes may play an important role in the pathogenesis on BTX exposure and have significant potential as novel biomarkers of exposure, susceptibility and response to BTC.