• 한국농공학회논문집
• /
• 제48권2호
• /
• pp.69-76
• /
• 2006

Fallow paddy areas have been increased due to the import of cheap agricultural product, and the unbalance between farming cost and rice price since 1990. The increasing fallow paddy area needs to be protected from the devastation by weed breeding for the re-cultivation. In this study, two fallow paddy fields managed with different water depth were selected for monitoring and analysing of water quality, water balance and plant body change. The managed fallow paddy fields were more effective in water quality purification and plants growth control than non-managed fallow paddy fields. And the fallow paddy field managed with some degree of water depth was the most effective field in terms of weed control.

• 한국경영과학회지
• /
• 제26권1호
• /
• pp.71-85
• /
• 2001

This paper considers a cost model for a U-shaped manufacturing cell formation which incorporates a required number of machines and various material flows together under multi-part multi-cell environment. The model is required to satisfy both the specified operation sequence of each part and the total part demand volume, which are considered to derive material handling cost in U-shaped flow line cells. In the model several cost-incurring factors including set-up for batch change-over, processing time for operations of each part, and machine failures are also considered in association with processing load and capacity of each cell. Moreover, a heuristic for a good machine layout in each cell is newly proposed based on the material handling cost of each alternative sequence layout. These all are put together to present an efficient heuristic for the U-shaped independent-cell formation problem, numerical problems are solved to illustrate the algorithm.

• 한국기술혁신학회:학술대회논문집
• /
• 한국기술혁신학회 2010년도 춘계 학술대회 논문집
• /
• pp.3-14
• /
• 2010

Through time-series plots, we can see relatively stable trend of energy factor share and the decreasing trend of relative energy prices (to wages) in Korea. We can compromise these empirical facts with the following explanation: if elasticity of substitution between capital and energy is smaller than one(<1) in Korea, a change(decrease) in energy price can prevent income share of resources from rising in the process of economic growth. This is consistent with theoretical and empirical results that substitution between energy and capital is so difficult. From simple empirical analysis and limited information, we can carefully infer that, in the past in Korea, resource-specific innovation was performed widely. Finally, If we are to reduce the magnitude of "growth drag", we should decrease energy factor share. This can be accomplished by energy-augmenting technical progress in the case of elasticity of substitution less than 1 as in Korea.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1997년도 춘계학술대회
• /
• pp.461-464
• /
• 1997

The ECG monitoring system had play a significant roll in ICU, CCU and operating room. By alarming the change of ECG wave form and heart rate, staff can control emergency state. The improve of recent digital technology is able to develope low cost and high quality ECG monitoring system. In this paper, we develope new monitoring system with low price microprocessor and control system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 A
• /
• pp.609-610
• /
• 2006

As developing the information society, Lighting Emitted diode(LED) which is light source for illumination of next generation is attracted public attention. LED have many problem as narrow light view angle, high price, drift phenomenon of color coordinate, high heating problem for lower power, lower weight and small size. So, many researches have continued in a illumination as LED module type. in this problem, heating problem is very important and difficult and that is caused in decreasing phenomenon of brightness and drift phenomenon of color coordinate. so the problem of heating is urgent question for illumination of LED. In this paper, structural design of PCB changed as two type for solving the heating problem. also the properties of heating is analysed and optical properties is measured with heating image camera and spectrometer according to change in this design.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 D
• /
• pp.2241-2242
• /
• 2006

As developing the information society, Lighting Emitted diode(LED) which is light source for illumination of next generation is attracted public attention. LED have many problem as narrow light view angle, high price, drift phenomenon of color coordinate, high heating problem for lower power, lower weight and small size. So, many researches have continued in a illumination as LED module type. in this problem, heating problem is very important and difficult and that is caused in decreasing phenomenon of brightness and drift phenomenon of color coordinate. so the problem of heating is urgent question for illumination of LED. In this paper, structural design of PCB changed as two type for solving the heating problem. also the properties of heating is analysed and optical properties is measured with heating image camera and spectrometer according to change in this design.

• 펄프종이기술
• /
• 제36권3호
• /
• pp.1-8
• /
• 2004

It is very difficult to compare directly the research results of enzymatic process in pulp and paper industry because commercial enzymes have diversity in its property. The chemical and biological properties of commercial enzymes were Investigated to help comparison of various commercial enzymes each other. In most case, the solid content of liquid enzymes was about 20%. The higher protein content in enzyme product does not mean the higher enzyme activity. Enzymes for paper process should selected by basis of enzyme activity, not by price of enzyme products. The chemical composition of fiber was not so much change with enzyme treatment. The enzymatic hydrolysis of fiber might negligible in paper process.

• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 1997년도 춘계학술대회논문집
• /
• pp.183-189
• /
• 1997

In order to help develop more comfortable seat cover fabrics, this study primarily surveyed the actual using conditions and the consumers' opinions of the seat cover fabrics. The results of this study were as follows: 1) The colors of seat cover fabric were mostly achromatic. Regarding comsumers' satisfaction on the colors of seat cover fabric, comsumers in their 20's were less satisfied than other age groups. Most unsatisfied consumers prefered bright colors. 2) On the materials of seat cover fabric, synthethic leather and woven were most widely used. Real leather was most prefered due to its luxury and tactile sensation. Woven was secondarily prefered due to its price and tactile sensation. About fourty percent of consumers covered the seat with other cover fabrics because of soil and other reasons. It will be useful if they could choose and change the seat cover fabircs with different materials and colors. 3) When consumers used the seat cover fabrics, the problems that they indicated were not durability and colorfastness but low breathablity during sweating, static electricity, soil, firmness, and cool sensation at the first contact.

• 한국해양공학회지
• /
• 제13권3B호
• /
• pp.116-126
• /
• 1999

The purpose of this study is to analyze the economic aspect of sea transportation system between Inchon and Youngjong island in which Inchon international airport is being constructed. Total demand of sea transportation arising from in the airport and Yongyu Muwi leisure complex was estimated. To select optimum transportation route, environmental conditions in and around Inchon harbour and Youngjong island including the change of water depth by tide current, fog, rain, wind adn typhoon, ets., were investigated. The preliminary consideration on ships (size, velocity, transport capacity, price), routes, operational modes, terminals and berthing facilities were carried out. The transportation cost per passenger by sea transportation system was estimated to compare with that of land transportation system. It was found that sea transportation system proposed is competitive to the transportation system.

• 한국건축시공학회지
• /
• 제12권6호
• /
• pp.682-700
• /
• 2012

Over the last several years, Korea has increasingly adopted design-build for public construction projects. There is a much greater awareness of the need to change to a system based on 'Value for Money', which is high on the government's agenda. A whole life performance bid evaluation model is proposed to aid decision makers in the selection of a design-builder. This is based on the integration of a framework using an analytic hierarchy process, as the bid awarding system is being changed from one based on the lowest price to one based on best value over the life-cycle. Key criteria such as whole life cost, service life planning and design quality are important through the key stages of the evaluation process. The model uses a systematic and holistic approach, which enables the public sector client to make better decisions in design-builder selection, which will deliver whole life benefits based on long-term cost-effectiveness.