• 마이크로전자및패키징학회지
• /
• 제22권4호
• /
• pp.57-63
• /
• 2015

내산화 특성을 가지는 저가격 도전성 필러 소재로의 적용을 위해 Ag 코팅 Cu 플레이크의 제조를 수행하면서 Cu 플레이크 표면의 산화층 제거를 위한 암모니아수 기반 전처리 용액의 적용법에 따른 영향을 분석해 보았다. 1회 전처리법 적용 시 전처리 시간이 2분을 초과하면서 플레이크 표면에서 홀 형태의 결함들이 생성되었으며, 유지시간에 비례하면서 그 개수와 크기가 점차 증가하였다. 또한 2분간의 전처리 후 Ag 도금 용액을 투입한 결과 도금 반응 중에 결함 발생이 다시 진행되어 플레이크 입자의 손상을 막을 수 없었다. 이에 비해 2분간의 1차 전처리 후 전처리 용액을 제거하고 저농도의 전처리 용액을 투입하여 2차 전처리를 실시하면서 Ag 도금 용액을 투입한 공정법에서는 상기 결함의 발생 빈도를 크게 줄일 수 있었다. 그 결과 1회 전처리법으로 제조된 15 wt% Ag 코팅 Cu 시료의 경우 약 $166^{\circ}C$의 온도부터 산화가 시작되었지만, 2회 전처리법으로 제조된 시료는 약 $224^{\circ}C$에서 산화가 시작되어 월등히 향상된 내산화 특성을 나타내었다.

• 한국표면공학회지
• /
• 제48권5호
• /
• pp.194-198
• /
• 2015

A blade-abrading method was newly developed for the preparation of clean Mg alloy surface and reported for the first time in detail in this paper. The blade-abrading method includes abrading of the Mg alloy surface with a sharp blade or knife to remove the surface oxide and contaminants on the skin of Mg alloys mechanically, thereby providing very clean surface of Mg alloys. The clean surface prepared by the blade-abrading method in the air was found to be covered with thin and dense air-formed oxide films. Based on the experimental results obtained in this work, it is concluded that the newly developed blade-abrading technique is a very simple and useful pretreatment method which can provide clean and well-defined surface for the following surface treatments.

• Current Optics and Photonics
• /
• 제5권3호
• /
• pp.322-328
• /
• 2021

In this paper, a pretreatment method for a matrix in convex optimization is proposed to optimize the spectral reconstruction process of a disordered dispersion spectrometer. Unlike the reconstruction process of traditional spectrometers using Fourier transforms, the reconstruction process of disordered dispersion spectrometers involves solving a large-scale matrix equation. However, since the matrices in the matrix equation are obtained through measurement, they contain uncertainties due to out of band signals, background noise, rounding errors, temperature variations and so on. It is difficult to solve such a matrix equation by using ordinary nonstationary iterative methods, owing to instability problems. Although the smoothing Tikhonov regularization approach has the ability to approximatively solve the matrix equation and reconstruct most simple spectral shapes, it still suffers the limitations of reconstructing complex and irregular spectral shapes that are commonly used to distinguish different elements of detected targets with mixed substances by characteristic spectral peaks. Therefore, we propose a special pretreatment method for a matrix in convex optimization, which has been proved to be useful for reducing the condition number of matrices in the equation. In comparison with the reconstructed spectra gotten by the previous ordinary iterative method, the spectra obtained by the pretreatment method show obvious accuracy.

• Near Infrared Analysis
• /
• 제2권1호
• /
• pp.29-36
• /
• 2001

This review paper outlines modern pretreatment methods used in NIR spectroscopy. The pretreatment methods can be divided into four categories. One method in is noise reduction. Smoothing is a representative method for the noise reduction. Another is baseline correction. The second derivative and multiplicative scatter correction (MSC) are most frequently employed for baseline correction. The third is centering and normalization and the last is resolution enhancement. Difference spectra, mean centering and second derivative are used in NIR spectroscopy as resolution enhancement methods. In this paper advantages and drawbacks of pretreatment methods currently used in NIR spectroscopy are discussed with many examples of NIR spectra.

• Bulletin of the Korean Chemical Society
• /
• 제28권1호
• /
• pp.59-62
• /
• 2007

A quantitative analysis method of halogen elements in volatile organohalogen compounds was established by the Wickbold combustion pretreatment in an enclosed system and ion chromatography. The sample pretreatment parameters of Wickbold combustion were experimentally optimized, and using the determined optimal pretreatment parameters, the reproducibility was estimated by ion chromatography. As a comparison for real samples, NIST certified reference materials (CRMs) were analyzed for the recovery efficiency and reproducibility.

• 한국연초학회지
• /
• 제30권1호
• /
• pp.25-32
• /
• 2008

In this study, we compared three different pretreatment methods, such as block digestion, microwave digestion and solvent injection, coupled with Octopole Reaction System(ORS)-ICP-MS was used for the quantification of heavy metals in mainstream smoke of 2R4F reference cigarette, and then evaluated those efficiencies in the recovery, repeatability and reproducibility. In all methods, volatile heavy metals, As, showed the highest CV value, and Cd showed the lowest one. However, the solvent injection method showed the most stable recovery rate and CV value of 2.36 %. This method showed also advantages in time-consuming and compatibility with ICP-MS system. This results demonstrate that solvent injection method can be recommended as a superior pretreatment procedure to be able to reduce contaminants and spectral interference as well as loss of the elements interested.

• 분석과학
• /
• 제16권6호
• /
• pp.509-512
• /
• 2003

Pretreatment method for the determination of total arsenic in seafood sample was studied. NIST SRM 1566a oyster tissue ($14.0{\pm}1.2mg\;As/kg$) as a standard arsenic compound in order to establish the decomposition method. We confirmed that the best way for pretreatment of seafoods to analyze total arsenic content precisely was $HNO_3-H_2SO_4-HCIO_4$ method by comparison of two methods which are dry ashing and wet ashing methods.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제27권4호
• /
• pp.63-74
• /
• 2022

In analyzing heavy metals in soil samples, the standard protocol established by Korean Minstry of Environment (KSTM) requires two different pretreatments (A and B) based on soil particle size. Soil particles < 0.15 mm in diameter after sieving are directly processed into acid extraction (method A). However, if the quantity of soil particles < 0.15 mm are not enough, grinding of the particles within 0.15 mm ~ 2 mm is required (method B). Grinding is often needed for some field samples, especially for the soil samples retrieved from soil washing process that contain relatively large-sized soil grains. In this study, two soil samples with different particle size distribution were prepared and analyzed for heavy metals concentrations using two different pretreatment to investigate the effect of grinding. The results showed that heavy metal concentrations tend to increase with the increase of the fraction of small-sized particles. In comparison of the two pretreatments, pretreatment A yielded higher heavy metal concentration than pretreatment B, indicating significant influence of grinding on analytical results. This results suggest that the analytical values of heavy metals in soil samples obtained by KSTM should be taken with caution and carefully reviewed.

• Restorative Dentistry and Endodontics
• /
• 제17권2호
• /
• pp.355-364
• /
• 1992

This is a study on the effect of the dentinal pretreatment method to the bond strength between dentin and glass ionomer cement. In this study, 196 human molar teeth with sound crown were used. The dentin surfaces of these teeth were exposed with wet trimmer and polished with # 800 Emory paper and teeth were divided into 7 groups according to the pretreatment agent and method. Each group has 4 subroups of the kinds of glass ionomers. The shear bond strength were measured by Instron Universal Testing machine model 1122. The data of the evaluations were then subjected to statistical analysis using one way ANOVA and the result were as follows : 1. In Durelon liquid 20 sec scrubbing & Vitrebond filling subgroup, shear bond strength was highest with measurements of 72.41(kg/$cm^2$) and in no pretreatment & Shofu lining cement filling subgroup, lowest with measurements of 4.77(kg/$cm^2$). 2. In no pretreatment group, statistical significant differences were found between the subgroups of G-C lining cement and Shofu lining cement. 3. In Ketac conditioner 20 sec scrubbing group, Vitrebond were bonded stronger than others, and in Ketac conditioner 10 sec passive contact group, it has the significant difference with other glass ionomers except G-C lining cement. 4. The subgroup og G-C dentin conditioner 20 sec scrubbing & G-C lining cement filling was bonded to dentin stronger than the subgroup of no pretreatment & Shofu lining cement. In G-C dentin conditioner groups, both of 10 sec passive contact and 20 sec scrubbing, Vitrebond has highest bond strength among the subgroups. 5. The subgroup of Durelon liquid 10 sec passive contact & G-C lining cement filling was bonded to dentin stronger than the subgroup of no pretreatment & Shofu lining cement. Also in both Durelon liquid groups, Vitrebond were bonded to dentin with the highest strength among the subgroups.

• 공업화학
• /
• 제21권1호
• /
• pp.24-28
• /
• 2010

이산화탄소의 광물고정화는 자연계의 풍화 작용을 모사한 것으로 매우 안정한 반응이지만 반응 속도가 매우 느리다. 이러한 반응 속도 증가를 위하여 광물의 전처리가 필요하다. 본 연구에서는 이산화탄소 광물고정화 속도 증가를 위한 두 가지의 전처리 방법을 소개하고 고정화 효율 증가를 확인하였다. 열적전처리는 $630^{\circ}C$에서 행해지는데, 이는 이산화탄소가 고정화되는 것을 방해하는 사문석 분자 내의 -OH기의 제거한다. FT-IR 피크를 통해 -OH기가 제거되는 것을 확인할 수 있다. 화학적전처리는 사문석 내의 주요 광물고정화 성분인 마그네슘 성분을 $75^{\circ}C$의 추출 온도에서 황산을 이용하여 추출해내는 것이다. 황산의 수소이온이 사문석 내의 결합을 약화시켜 마그네슘이 추출되도록 한다. 이는 ICP-AES와 XRF를 통하여 추출량을 확인하였다. 전처리가 끝난 사문석을 이용하여 이산화탄소 광물고정화 반응을 진행시 열적전처리의 경우 43%의 이산화탄소 고정화 효율을 나타내는데, 전처리를 하지 않았을 때 27%의 효율에 비하여 증가하였음을 확인하였다. 하지만 이 경우 많은 에너지가 소비된다는 단점이 있다. 화학적 전처리의 경우 열적전처리에 비해 45 atm, $25^{\circ}C$라는 비교적 온화한 조건에서 진행되는데, 이산화탄소 고정화 효율도 전처리 전인 24%에서 42%까지 상승하는 것을 확인할 수 있다.