• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.5
• /
• pp.526-529
• /
• 2004

The nematic liquid crysta](NLC) aligning capabilities using a-C:H thin film deposited at the three kinds of rf bias condition were investigated. A high pretilt angle of NLC on low substrate rf bias applied a-C:H thin films was observed and the low pretilt angle of the NLC on high substrate rf bias applied a-C:H thin films was observed. Consequently, the high NLC pretilt angle and the good aligning capabilities of LC alignment by the IB alignment method on the a-C:H thin film deposited at 1 W rf bias condition can be achieved. It is considered that pretilt angle of the NLC may be attributed to substrate rf bias condition and IB energy time. Therefore, LC alignment is affected by topographical structure forming strong IB energy.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.4
• /
• pp.341-344
• /
• 2001

We synthesized a photo-crosslinkable polymide (polymide (PI)-chalcone-biphenyl (BP)) based polymer and control of pretilt angle for a nematic liquid crystal (NLC) using two kinds of the photodimerization methods by polarized UV exposure the photopolymer surfaces was studied. Pretilt angle of the NLCs using a conventional photodimerization method could be varied between 0$^{\circ}$ and 3$^{\circ}$, by controlling the condition of UV exposure. Pretilt angle of the NLCs using the conventional photodimerization method was higher than a in-situ photodimerization method.

• Transactions on Electrical and Electronic Materials
• /
• v.7 no.6
• /
• pp.297-300
• /
• 2006

The response surface modeling of the pretilt angle control using ion-beam (IB) alignment on nitrogen doped diamond-like carbon (NDLC) thin film layer is investigated. This modeling is used to analyze the variation of the pretilt angle under various process conditions. IB exposure angle and IB exposure time are considered as input factors. The analysis of variance technique is settled to analyze the statistical significance, and effect plots are also investigated to examine the relationships between the process parameters and the response. The model can allow us to reliably predict the pretilt angle with respect to the varying process conditions.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.336-339
• /
• 2000

Effects of liquid crystal (LC) alignment using an in-situ photo-alignment method by linearly polarized UV exposure during imidization of polyirnide (PI) on the two kinds of PI surfaces with side chain were investigated. The generated pretilt angle in nematic (N) LC using an in-situ photo-alignment method was smaller than that of a conventional photo-alignment method for short UV exposure time. Also, the pretilt angle of the NLC using an in-situ photo-alignment method increases with increasing UV exposure time on the two kinds of the PI surfaces. Finally, the pretilt angle of NLC can be improved by annealing treatment.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.11
• /
• pp.950-953
• /
• 2000

Aligning capabilities of nematic liquid crystal(NLC) using an in-situ photo-alignment method with obliquely polarized UV exposure on a polyimide (PI) surface for homeotropic alignment were studied. The high angle for NLC can be measured by obliquely UV exposure of 30°on the PI surface for 10∼20 min. The pretilt angle of NLC generated using the in-situ photo-alignment was higher than that of a conventional photo-alignment method. Finally, we suggest that the control of pretilt angle in NLC with obliquely polarized UV exposure during imidization of the polymer for homeotropic alignment is promising method to generate high pretilt angle.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.350-353
• /
• 2001

Aligning capabilities for nematic liquid crystal (NLC) using a in-situ photodimerization method on various Photo-crosslinkable polyimide (PI) based Polymer and blending photopolymer surfaces were studied. High pretilt angle of the NLC can be measured by obliquely polarized UV exposure on a photo-crosslinkable polyimide based polymer surface containing biphenyl (BP), decal (de), and cholesterol (chol) group, respectively. However, the low pretilt angle of the NLC was measured by obliquely polarized UV exposure on the blending photopolymer (PI and cinnamate materials) surfaces. Consequently, the pretilt angle of the NLC generated on the photo-crosslinkable polyimide based polymer surfaces using the in-situ photodimerization method was higher than that of the blending photopolymers.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.12
• /
• pp.1110-1114
• /
• 2003

We have investigated the generation of pretilt angle for a nematic liquid crystal (NLC) alignment with rubbing alignment method on polyimide surfaces using thin plastic substrates. It was found that monodomain alignment of NLC is obtained with rubbing alignment method on polyimide surfaces using thin plastic substrates. The NLC pretilt angles generated are about 3$^{\circ}$ by the rubbing alignment method on thin plastic substrates, However, the pretilt angle are at about 1.7$^{\circ}$ lower on the glass substrate than on thin plastic substrate. We obtain that AFM (atomic force microscope) image of rubbed PI surface with polymer film has formed the micro-groove structure at the low curring temperature (120$^{\circ}C$). However, no grooves are obtained on the glass substrate at the same temperature. It is considered that this alignment may be attributed to roughness of micro-groove substrate. The tilt angle increases with increasing baking temperature for making polyimide layer using glass substrate. It was concluded that the pretilt angle in the polyimide surface is attributable to the increasing of imidization rato.

• Proceedings of the KIEE Conference
• /
• 1998.07d
• /
• pp.1391-1394
• /
• 1998

In this paper, we investigated the generation of pretilt for nematic liquid crystal (NLC) in a cell with linearly polarized ultraviolet (UV) light irradiation on polyimide (PI) surface. The pretilt angle of the NLC increases with increasing the incident angle in the cells with S-wave polarized UV light irradiation on PI surface. It is considered that the pretilt angle of the NLC increased due to decreasing the UV light intencity. We suggest that the pretilt angle of the NLC is attributed to asymmetry triangular of the polymer surface with S-wave polarized UV light irradiation on PI surface. Also, we consider that the asymmetry triangular of the Polymer not formed with P-wave polarized UV light irradiation on PI surface. Therefore, the pretilt angle of the NLC is attributed to asymmetry triangular of the polymer surface with UV light irradiation on PI surface.

• Transactions on Electrical and Electronic Materials
• /
• v.4 no.1
• /
• pp.21-23
• /
• 2003

The washing effects on pretilt angle generation in a nematic liquid crystal (NLC), 4-n-pentyl-4'-cyanobiphenyl (5CB) on a rubbed polyimide (PI) surface with trifluoromethyl moiety have been successfully studied. The pretilt angle of 5CB is increased by the washing process on the rubbed PI surface. The surface tension on the rubbed PI surface increases with the rubbing strength RS and then saturated above RS: 150 mm. The pretilt angle of 5CB for all washing processes on the rubbed PI surface decreases with the surface tension. We have found that the pretilt angle of 5CB on the rubbed PI surface may be attributed van der walls (VDW) dispersion interaction between the LC molecules and the polymer surfaces having trifluoromethyl moieties.

• Transactions on Electrical and Electronic Materials
• /
• v.6 no.3
• /
• pp.106-109
• /
• 2005

We have investigated the generation of pretilt angle for a nematic liquid crystal (NLC) alignment with in-situ photoalignment method on polyimide (PI) surfaces using polymer films. Especially, we studied in-situ photoalignment changing heating temperature from $50^{\circ}C\;to\;120^{\circ}C$ on the polymer film. The LC aligning capabilities and pretilt angle on the polymer substrates were better than those on the glass substrate using in-situ photoalignment method. It is considered that this increase in pretilt angle may be attributed to the roughness of the micro-groove substrate induced by the in-situ photoalignment. As temperature of heated subtrate and UV exposure time increase, pretilt angle of the cell used polymer film increased. It is considered that the heating temperature of substrate is attributed to generate pretilt angle. Also, electro-optical performances of the in-situ photoaligned TN cell using the polymer substrate are almost the same as that of the TN cell using the glass substrate.