• 대한치과교정학회지
• /
• 제22권4호
• /
• pp.855-868
• /
• 1992

This study was designed to test the possibility of using a standardized lateral facial photographs as a clinical tool which produce the prediction of postsurgical soft-tissue profile changes associated with surgical correction in skeletal CIII patients. The number of the patients involved in this study were 27 in total, including 11 male patients and 16 female patients. A practical method to the utilization of presurgical photo prediction for mandibular prognathic patients has been presented. To predict postoperative facial appearance, montage photographs were superimposed on standard facial reference photos taken preoperatively. Within the limitations of its technology, postoperative predictions generated by this method were of sufficient accuracy, especially mandible and chin area, for clinical use. In addition, they provide valuable communication and diagnostic information which may be used in formulating treatment plan in cases requiring corrective orthognathic surgery. But, the lip changes were somewhat exaggerated by photo prediction. Consequently, the photo prediction seems suitable for planning profile changes in orthognathic surgery that include mobilization of one main mandibular fragment. Futher investigations are needed to determine whether changes of soft-tissues and hard-tissues are sufficiently reproducible so that more meaningful predictive values can be established.

• 치과방사선
• /
• 제24권2호
• /
• pp.413-423
• /
• 1994

The purpose of this study was to clarify the spatial relationship in presurgical examination and to aid surgical planning and postoperative evaluation of patients with facial bone injury. For this study, three-dimensional images of facial bone fracture were reconstructed by computed image analysis system and three-dimensional reconstructive program integrated in computed tomography. The obtained results were as follows: 1. Serial conventional computed tomograms were value in accurately depicting the facial bone injuries and three-dimensional reconstructive images demonstrated an overall look. 2. The degree of deterioration of spatial resolution was proportional to the thickness of the slice. 3. Facial bone fractures were the most distinctly demonstrated on inferoanterior views of three-dimensional reconstructive images. 4. Although three-dimensional reconstructive images made diagnosis of fracture lines, it was difficult to identify maxillary fractures. 5. The diagnosis of zygomatic fractures could be made equally well with computed image analysis system and three-dimensional reconstructive program integrated in computed tomography. 6. The diagnosis of mandibular fractures could be made equally well with computed image analysis system and three-dimensional reconstructive program integrated in computed tomography.

• Journal of Periodontal and Implant Science
• /
• 제44권4호
• /
• pp.184-193
• /
• 2014

Purpose: The aim of the present study was to evaluate the in vivo accuracy of flapless, computer-aided implant placement by comparing the three-dimensional (3D) position of planned and placed implants through an analysis of linear and angular deviations. Methods: Implant position was virtually planned using 3D planning software based on the functional and aesthetic requirements of the final restorations. Computer-aided design/computer-assisted manufacture technology was used to transfer the virtual plan to the surgical environment. The 3D position of the planned and placed implants, in terms of the linear deviations of the implant head and apex and the angular deviations of the implant axis, was compared by overlapping the pre- and postoperative computed tomography scans using dedicated software. Results: The comparison of 14 implants showed a mean linear deviation of the implant head of 0.56 mm (standard deviation [SD], 0.23), a mean linear deviation of the implant apex of 0.64 mm (SD, 0.29), and a mean angular deviation of the long axis of $2.42^{\circ}$ (SD, 1.02). Conclusions: In the present study, computer-aided flapless implant surgery seemed to provide several advantages to the clinicians as compared to the standard procedure; however, linear and angular deviations are to be expected. Therefore, accurate presurgical planning taking into account anatomical limitations and prosthetic demands is mandatory to ensure a predictable treatment, without incurring possible intra- and postoperative complications.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제36권5호
• /
• pp.375-379
• /
• 2010

Introduction: In the management of dentofacial deformities, variable movement of the maxilla can be made possible by a Le Fort I osteotomy. Posterior impaction of the maxilla necessary for rotation of the maxillomandibular complex enhances the functions and esthetic results. In cases of posterior impaction of the maxilla, an increase in the figure of the occlusal plane angle and incisor inclination can occur. This study reports the relationship between the amount of posterior impaction and the change in the occlusal plane angle and incisor inclination in a Le Fort I osteotomy by preoperative and postoperative lateral cephalograms. Materials and Methods: Twenty patients who had undergone orthognathic surgery in Dong-A University Medical Center participated in this study. Lateral cephalometrics, within 3 weeks prior to surgery and 3 days after surgery, were used for analysis. Pre and postoperative measurements of the occlusal plane angle and incisal inclination based on the Frankfort horizontal (FH) plane were performed. X and Y were defined as the amount of vertical change in the upper incisor tip and the amount of vertical change in the upper first molar mesial cup tip through the operation. The amount of final posterior maxillary impaction was determined by subtracting Y from X, which is the difference in vertical height. According to the amount of posterior maxillary impaction, the change in the occlusal plane angle and incisal inclination was measured. Results: The average posterior maxillary impaction was 2.91 mm and the average change in the occlusal plane angle and incisal inclination was $6.54^{\circ}$after surgery. As a result, each mm of posterior maxillary impaction changed the occlusal plane angle and incisal inclination by $2.25^{\circ}$. Statistically, there was high significance. Two cases were observed: one with the same amount of posterior maxillary impaction performed on both the right and left showing $2.20^{\circ}$, and the other with a different amount of posterior maxillary impaction performed showing $2.35^{\circ}$. In this case, there was no significance difference between the two cases. Conclusion: Each mm of posterior maxillary impaction changes the occlusal plane angle and incisal inclination by an average of $2.25^{\circ}$. In posterior maxillary impaction, there was no significant difference in the amount of change in the occlusal plane angle and incisal inclination regardless of whether there was an equal amount of posterior maxillary impaction on both sides. This study is expected to help in the presurgical orthodontic preparation and presurgical treatment planning.

• 대한치과교정학회지
• /
• 제35권1호
• /
• pp.23-34
• /
• 2005

본 연구에서는 III급 수술-교정 치료 방법에 영향을 미치는 치열 상의 요소를 파악함으로써 술전 교정시 상악 소구치 발치와 비발치의 판단에 필요한 임상적 정보를 얻고자 골격성 III급 부정교합 환자의 수술-교정 치료시 흔히 선택되는 상악 제1소구치 발치로 치료된 군과 비발치로 치료된 군 간의 치료전/후 상/하악 개별 치아 이동 양상과 치열궁 폭경의 변화 양상을 비교 분석하였다 이를 위하여 비발치로 III급 수술-교정 치료를 마친 환자 (24명) 와 술전교정 치료시 상악 제1소구치가 발치된 환자 (31 명)의 치료 전/후 모형 상에서 개개 치아의 근원심/협설측 각도 변화와 상/하 치열궁 폭경의 변화를 측정한 후, 두 군 사이의 교정적 치아 이동 양상을 비교 분석한 후 상/하 치열궁의 조화를 이루는데 필요한 치열궁 폭경의 변화와 이에 기여하는 치아 변위와의 관계를 분석하기 위하여 상관 분석과 회귀 분석을 시행한 결과 발치 군은 비발치 군에 비하여 상악 치열궁 폭경의 감소가 컸으며 이는 상악 구치의 inclination 감소에 크게 영향 받은 것으로 관찰되었다. 하악 치열에서는 inclination의 증가와 폭경의 증가가 있었으나, 비발치/발치군간의 차이는 유의하지 않았다 본 연구의 결과 결론적으로 III급 수술-교정 치료시 술전 상악 소구치 발치는 상악 구치부 치열궁 폭경의 감소에 크게 영향을 미치므로, 상악 소구치 발치에 대한 판단은 상/하악 치열궁의 폭경 및 구치부 경사도 문제와 연계하여 고려해야 할 사항으로 생각되었다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제22권3호
• /
• pp.337-342
• /
• 2000

Purpose : The purpose of this study was to analyze the lower third facial changes in frontal view after mandibular setback surgery. Materials and Methods : In this study, fifteen subjects(6 males and 9 females) with class III dental and skeletal malocclusions who were treated with BSSRO(Bilateral Sagittal Split Ramus Ostetomy) were used. Frontal cephalometric radiographs were taken preoperatively and more than 6 months postoperatively, and hard tissue(H2-Hl) and soft tissue changes (S2-S1) were measured on vertical and horizontal reference lines. In 15 cases, changes which developed more than 6 months after surgery were studied. Results : The results were as follows. 1. In the facial height, hard tissue $decreased(2.46{\pm}2.76mm)$ with statistical significance(P<0.01), and soft tissue also $decreased(1.64{\pm}3.66mm)$. As a result, the facial height generally becomes shorter after sagittal split ramus osteotomy. 2. In the mandibular width, hard tissue $decreased(2.08{\pm}3.59mm)$ with statistical sgnificance(P<0.05), but soft tissue $increased (2.14{\pm}5.73mm)$ without statistically significant difference(P>0.05) postoperatively. 3. In the facial index, hard tissue $decreased(0.23{\pm}2.21%)$, but soft tissue $increased(2.41{\pm}3.46%)$ with statistical significance. Conclusion : One of the main purpose of orthognathic surgery is to achieve facial esthetics and harmony. In order to fullfill this purpose, it is important to carry out a precise presurgical treatment planning by estimating the changes of frontal profile after surgery.

• 대한치과교정학회지
• /
• 제33권1호
• /
• pp.1-9
• /
• 2003

본 연구에서는, 술전 교정전 예측치와 교정 후 실측치 사이에 나타나는 오차의 크기와 정확성 및 어떠한 요소가 그러한 결과에 영향을 미치는지에 대해 평가하고자 하였다. 연세대학교 치과병원 교정과에서 골격성 III급 부정교합으로 진단되어 술전 교정치료 및 양악수술을 받은 환자 가운데 조건에 부합되는 45명(남자 17명, 여자 28명)을 선별하여, 초진 상태를 T1, 교정 치료전 예측치를 T2, 술전 교정후를 T3로 정의하고 각각의 계측치를 수평과 수직좌표로 나누어 측정하였다. 또한 환자의 어떠한 진단적 요소가 술전교정의 예측치와 실측치 사이의 차이에 영향을 미치는지 알아보기 위해 연구대상을 arch length discrepancy (ALD), 상$\cdot$하악 전치의 치축(U1 to SN, IMPA), curve of Spee(COS), 발치 여부, 발치한 치아의 종류 등에 의해 여러 군으로 분류하여 유의성을 평가하였으며 다음과 같은 결과를 얻었다. 1. U6mbc, L1x의 수평 좌표와 U1i, U1x, W6me, U6mbc, L6mbc의 수직 좌표에서 예측한 위치와 수술직전의 실제 위치의 차이가 유의성(p<0.05) 있게 나타났다. 2. 예측의 정확성은 수평적인 차이의 예측에 있어서 수직적인 차이의 예측에 비해 상대적으로 높게 나타났다. 3. 하악에서보다 상악의 많은 계측점에서 예측치와 실측치 사이의 유의한 차이(p<0.05)가 관찰되었다. 4. 상악의 경우 발치 여부 및 발치한 치아의 종류, ALD의 양에 따라 상악 전치와 제1대구치 위치의 예측에 유의한 차이(p<0.05)를 보였으며, 하악의 경우에는 ALD의 양과 IMPA에 따라 하악 전치와 제1대구치의 위치의 예측에 유의한 차이(p<0.05)를 나타냈다. 이번 연구에서 얻은 결과를 통하여 술전 교정전 예측치와 실측치 사이의 오차의 정도와 그것에 영향을 미치는 요소들을 분석하고 회귀 계수를 구함으로써, 악교정 수술을 동반한 교정 환자의 치료 계획 시 예측의 정확성을 높일 수 있을 것으로 생각된다. 또한 수직적인 예측에 있어서는 앞으로 더 많은 연구가 이루어져야 할 것으로 생각된다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제36권5호
• /
• pp.417-422
• /
• 2010

Introduction: Bone density is one of the important factors for the long term success of endosseous implants. The bone density varies from site to site and from patient to patient. A preoperative evaluation of the bone density is quite useful to oral surgeons for planning dental implantation. More accurate information on the bone density will help surgeons identify suitable implant sites, thereby increase the success rate of dental implantation. This study examined the correlation between the bone density measured preoperatively by computed tomography (CT) and the implant primary stability measured by resonance frequency analysis. Furthermore, the effects of the implant sites, gender, age and generalized systemic disorder patients on the bone density and primary implant stability were examined. Materials and Methods: One hundred and fourteen patients were selected. None of the patients had undergone a tooth extraction or bone graft history in the previous year. Preoperatively, the patients underwent CT scanning to evaluate the Hounsfield unit (HU), and resonance frequency analysis (RFA) was used to evaluate the implant primary stability at the time of implant installation. All implants were 4.0 mm diameter and 11.5 mm length US II. All patients were recorded and the HU and implant stability quotient (ISQ) value were evaluated according to the sites, gender and age. Results: The highest HU values were found in the mandibular anterior site ($827.6{\pm}151.4$), followed by the mandibular molar site ($797{\pm}135.1$), mandibular premolar site ($753.8{\pm}171.2$), maxillary anterior site ($726.3{\pm}154.4$), maxillary premolar site ($656.7{\pm}173.8$) and maxillary molar site ($621.5{\pm}164.9$). The ISQ value was the highest in the mandibular premolar site ($81.5{\pm}2.4$) followed by the mandibular molar site ($80.0{\pm}5.7$), maxillary anterior site ($77.4{\pm}4.1$), mandibular anterior site ($76.4{\pm}11.9$), maxillary premolar site ($74.2{\pm}14.3$) and maxillary molar site ($73.7{\pm}7.4$). The mean HU and ISQ value were similar in females and males. (HU: P=0.331, ISQ: P=0.595) No significant difference was also found in the age group respectively. However, the correlation coefficients between the variables showed a closed correlation between the HU and ISQ value. Conclusion: These results showed close correlation between the bone density (HU) and primary stability value (ISQ) at the time of implant installation (Correlation coefficients=0.497, P<0.01). These results strengthen the hypothesis that it might be possible to predict and quantify the initial implant stability and bone density from a presurgical CT diagnosis.