• Nuclear Engineering and Technology
• /
• 제53권9호
• /
• pp.2977-2981
• /
• 2021

Corrosion fatigue crack growth (FCG) behavior of 316LN stainless steel was investigated in high-temperature pressurized water at different temperatures, load ratios (R = K_max/K_min) and rise times (t_R). The environmental assisted effect on FCG rate was observed when both the R and t_R exceeded their critical values. The FCG rate showed a linear relation with stress intensity factor range (ΔK) in double logarithmic coordinate. The environmental assisted effect on FCG rate depended on the ΔK and quantitative relations were proposed. Possible mechanisms of environmental assisted FCG rate under different testing conditions are also discussed.

• Nuclear Engineering and Technology
• /
• 제51권7호
• /
• pp.1765-1775
• /
• 2019

Multiple spurious operations (MSOs) mean multiple fire induced circuit faults causing an undesired operation of one or more systems or components. The Nuclear Energy Institute (NEI) of the United States published NEI 00-01 as guidelines for solving MSOs. And this guideline includes MSO scenarios of pressurized water reactor (PWR) and boiling water reactor (BWR). Nuclear power plant operators in U.S. analyzed MSOs under MSO scenarios included in NEI 00-01 and operators of PWRs in Korea also analyzed MSOs under the scenarios of NEI 00-01. As there are no pressurized heavy water reactors (PHWRs) in the United States, MSO scenarios of PHWRs are not included in the NEI 00-01 and any feasible scenarios have not been developed. This paper developed MSO scenarios which can be applied to PHWRs by reviewing the 63 MSO scenarios included in NEI 00-01. This study found that seven scenarios out of the 63 MSO scenarios can be applied and three more scenarios need to be developed.

• Nuclear Engineering and Technology
• /
• 제55권9호
• /
• pp.3164-3182
• /
• 2023

The CRUD on the fuel cladding under the pressurized water reactor (PWR) operating condition causes several issues. The CRUD can act as thermal resistance and increases the local cladding temperature which accelerate the corrosion process. The hideout of boron inside the CRUD results in axial offset anomaly and reduces the plant's shutdown margin. Recently, there are efforts to revise the acceptance criteria of emergency core cooling systems (ECCS), and additionally require the modeling of the thermal resistance effect of the CRUD during the performance analysis. There is an urgent need for the evaluation of the effect of the CRUD deposition on the cladding heat transfer under PWR operating conditions, but the experimental database is very limited. The experimental facility called DISNY was designed and constructed to analyze the CRUD-related multi-physical phenomena, and the performance analysis of the constructed DISNY facility was conducted. The thermal-hydraulic and water chemistry conditions to simulate the CRUD growth under PWR operating conditions were established. The design characteristics and feasibility of the DISNY facility were validated by the MARS-KS code analysis and separate performance tests. In the current study, detailed design features, design validation results, and future utilization plans of the proposed DISNY facility are presented.

• Nuclear Engineering and Technology
• /
• 제41권1호
• /
• pp.135-142
• /
• 2009

In this investigation, we prepared a 1 and 3-parallel serpentine single PEMFC, which has an active area of $100\;cm^2$ and a flow channel cross section of $1{\times}1mm$. Distribution and transport of water in a non-operating PEMFC were observed by varying flow types and the flow rates (250, 400, and 850 cc/min). This investigation was performed at the neutron imaging facility at the CO1d Neutron RAdiography facility (CONRAD), HMI, Germany of which the collimation ratio and neutron fluence rate are 250, $1{\times}10^{6}n/s/cm^2$, respectively. The neutron image was continuously recorded by a scintillator and lens-CCD coupled detector system every 10 seconds. It has been observed that although the distilled water was supplied into the cathode channel only, the neutron image showed a water movement from the cathode to the anode channel. The water at the cathode channel was completely discharged as soon as the pressurized air was supplied. But the water at the anode channel was not easily removed by the pressurized air except for the 3-parallel serpentine type with 850cc/min of air flow rate. Moreover, the water at the MEA wasn't removed for any of the cases.

• 한국수자원학회논문집
• /
• 제53권4호
• /
• pp.303-312
• /
• 2020

지하 대심도 터널은 도시 홍수방어구조물로 역 사이펀 형태의 시설물이다. 본 연구에서는 국내 최초로 건설중인 '신월 빗물저류배수시설'을 대상으로 다양한 홍수시나리오에서 불규칙 단파와 압축공기가 시설의 수리적 안정성에 미치는 영향을 확인하기 위하여 수리모형실험을 수행하였다. 본 연구 결과 하류에서 발생한 불규칙 단파가 상류로 이동하면서 시설 내 포집되어 있던 압축공기를 상류로 밀어내고 이 때 관내 압력이 상승하는 것으로 분석되었다. 또한 불규칙 단파가 통과할 때의 압력이 당시 정압력과 동압력의 합보다 큰 것으로 분석되었으며 압축공기 단면의 크기가 터널 단면적의 40% 이상인 경우 월류가 발생하는 것으로 분석되었다. 이는 시설 내 포집되어 있는 압축공기의 부피와 상관이 있는 것으로 판단되며 향후 불규칙 단파 속도와 압축공기 부피와의 관계에 대한 연구가 필요할 것으로 판단된다.

• Food Science and Biotechnology
• /
• 제18권4호
• /
• pp.996-1000
• /
• 2009

Sapium japonicum was extracted by a pressurized liquid. Operating parameters such as the type and the ratio of solvent to water, temperature, pressure, and number of extractions were investigated as the main variables that influence the extraction efficiencies of total phenolics (TP). MeOH extracted the highest level of TP as 50.4 mg GAE/g compared to 48.8 and 27.2 mg GAE/g with $H_2O$ and EtOH, respectively. $EtOH:H_2O$ (40:60, v/v) was found to be the best solvent for TP extraction as 90.3 mg GAE/g compared to 85.0 and 84.3 mg GAE/g in 40:60 and 60:40 of $MeOH:H_2O$, respectively. TP were increased with the increase of the number of extraction steps. TP content was increased by 11% as the extraction temperature was increased from 40 (97.4) to $50{\circ}C$ (108.3 mg GAE/g). The optimum extraction conditions of TP were; extraction solvent, $EtOH:H_2O$ (40:60, v/v); temperature, $50{\circ}C$; pressure, 10.2 MPa; 2 extraction steps.

• Corrosion Science and Technology
• /
• 제21권6호
• /
• pp.466-475
• /
• 2022

Surface oxides and intergranular (IG) oxidation phenomena in Alloy 600 depending on hydrogen concentration were characterized to obtain clear insight into the primary water stress corrosion cracking (PWSCC) behavior upon exposure to pressurized water reactor primary water. When hydrogen concentration was between 5 and 30 cm³ H₂/kg H₂O, NiFe₂O₄ and NiO type oxides were found on the surface. NiO type oxides were found inside the oxidized grain boundary when hydrogen concentration was 5 cm³ H₂/kg H₂O. However, only NiFe₂O₄ spinel on the surface and Ni enrichment were observed when hydrogen concentration was 30 cm³ H₂/kg H₂O. These results indicate that the oxidation/reduction reaction of Ni in Alloy 600 depending on hydrogen concentration can considerably affect surface oxidation behavior. It appears that the formation of NiO type oxides in a Ni oxidation state and Ni enrichment in a Ni reduction (or metallic) state are common in primary water. It is believed that the above different oxidation/reduction reactions of Ni in Alloy 600 depending on hydrogen concentration can also significantly affect the resistance to PWSCC of Alloy 600.

• 멤브레인
• /
• 제27권4호
• /
• pp.367-373
• /
• 2017

중공사형 정밀여과(MF)와 한외여과(UF)를 포함한 가압식 막여과 시스템은 높은 수준의 병원균 제거 효율로 인해 음용수 처리에 점점 더 많이 사용되고 있다. 그러나 가압식 막여과 시스템에서 분리막의 손상으로 인한 막완결성의 문제가 발생시 병원체가 유출될 수 있으므로, 효과적인 온라인 또는 오프라인 방식의 막 완결성 모니터링 방법을 통해 수질의 안정성을 보장하여야 한다. 최근 막 완결성 시험 중 하나 인 압력손실시험(pressure decay test, PDT)이 가압식 분리막 모듈을 이용한 음용수 처리 시설에 적용되고 있다. 이 논문에서는 PDT의 기체 주입방법에 따른 세 가지 조건으로 원수 측, 여과수 측, 원수 여과수 양방향 측 세 가지 조건을 선정 후 이에 따른 감지감도를 이론값과 실험값을 적용하여 비교하였다. 실험결과 가압되는 측의 부피와 감도는 반비례함을 확인하였고, 주입부의 반대방향에 부압을 형성 시에도 감도가 증가함을 확인할 수 있다. 즉 막 손상의 감지감도는 주입되는 부분의 체적이 작아질수록, 분리막을 경계로 유입과 여과 측의 압력차가 클수록 높아짐을 알 수 있었다.

• 공업화학
• /
• 제28권3호
• /
• pp.313-317
• /
• 2017

지속적인 에너지 수요의 증가로 인하여 저등급 석탄이 새로운 에너지 자원으로서 인정받고 있다. 그러나 저등급 석탄의 높은 수분 함량으로 인하여 저등급 석탄의 이용 효율은 기존의 석탄 이용 플랜트들에서 이용하기에 부족하다. 따라서 저등급 석탄의 수분 함량을 낮추는 건조 공정이 요구되고 있다. 비록 다양한 건조 실험들이 진행되었으나, 고압조건에서의 건조 특성은 크게 연구되지 않았다. 이에 본 연구에서는 높은 수분 함량을 지닌 저등급 석탄(수분 함량: 21.5 wt%)의 급속 건조 특성을 가압 마이크로 상승관을 이용하여 고찰하였다. 압력(1-40 bar), 건조 온도($200-600^{\circ}C$), 마이크로 상승관 길이(2-6 m) 등의 운전 조건 변화에 따른 저등급 석탄의 건조 특성을 분석하였다.

• Fisheries and Aquatic Sciences
• /
• 제20권7호
• /
• pp.14.1-14.8
• /
• 2017

In this study, marine tunicate Styela clava hydrolysate was produced by an environment friendly and green technology, pressurized hot water hydrolysis (PHWH) at different temperatures ($125-275^{\circ}C$) and pressure 50 bar. A wide range of physico-chemical and bio-functional properties such as color, pH, protein content, total carbohydrate content, reducing sugar content, and radical scavenging activities of the produced hydrolysates were evaluated. The appearance (color) of hydrolysates varied depending on the temperature; hydrolysates obtained at $125-150^{\circ}C$ were lighter, whereas at $175^{\circ}C$ gave reddish-yellow, and $225^{\circ}C$ gave dark brown hydrolysates. The $L^*$ (lightness), $a^*$ (red-green), and $b^*$ (yellow-blue) values of the hydrolysates varied between 35.20 and 50.21, -0.28 and 9.59, and 6.45 and 28.82, respectively. The pH values of S. clava hydrolysates varied from 6.45 ($125^{\circ}C$) to 8.96 ($275^{\circ}C$) and the values were found to be increased as the temperature was increased. The hydrolysis efficiency of S. clava hydrolysate was ranged from 46.05 to 88.67% and the highest value was found at $250^{\circ}C$. The highest protein, total carbohydrate content, and reducing sugar content of the hydrolysates were found 4.52 mg/g bovine, 11.48 mg/g and 2.77 mg/g at 175, and 200 and $200^{\circ}C$, respectively. Hydrolysates obtained at lower temperature showed poor radical scavenging activity and the highest DPPH, ABTS, and FRAP activities were obtained 10.25, 14.06, and 10.91 mg trolox equivalent/g hydrolysate (dry matter basis), respectively. Therefore, S. clava hydrolysate obtained by PHWH at $225-250^{\circ}C$ and 50 bar is recommended for bio-functional food supplement preparation.