• Proceedings of the ESK Conference
• /
• 1997.04a
• /
• pp.227-246
• /
• 1997

With a view of to providing basic data for designing male's and female's clothes, heslthy males and females(five each) were exposed to three different environmental temperature( $20{\pm}1.0^{\circ}C$ $28{\pm}1.0^{\circ}C$,$32{\pm}1.0^{\circ}C$ in the nude. Their adaptation of skin temperature, physilogical responses, oral temperature, blood pressure, pulse rates) and psychological reactions (thermal, comfort and perceptive sweat sensations) were analyzed to be as follows; The subjects's skin temperature had a similar look of adaptation, but the stability of skin temperature differed at the $20{\pm}1.0^{\circ}C$and at the $28{\pm}1.0^{\circ}C$ Males had higher skin temperatures at three environmental temperatures, but females showed a higher temperature change at the $20{\pm}1.0^{\circ}C$ and$28{\pm}1.0^{\circ}C$ and males at the $32{\pm}1.0^{\circ}C$ Thus females were more resistant to the cold, while male were more resistant to the heat. As environmental temperature increased, oral temperature and pulse rates also grew up. Females turned higher in oral temperature and lower in blood pressure, but both sexes had a normal range of physiological reactions. Even though three environmental temperature were same changes in thermal sensation at and in perceptive sweat sensation at $28{\pm}1.0^{\circ}C$and in perceptive sweat sensation at$32{\pm}1.0^{\circ}C$ the two sexes had the same response in comfort sensation at the three environmental temperature.

• Food Science of Animal Resources
• /
• v.29 no.1
• /
• pp.1-14
• /
• 2009

This study was to review the classification, detection and control of bacteriophage in fermented dairy products. Bacteriophage has lytic and/or lysogenic life cycles. Epidemiologically speaking, detected major phages are c2, 936 and p335. Among them p335 has been the largest concern in dairy industry. Traditionally, various analytical technologies, such as spot, starter activity, indicator test, ATP measurement and conductimetric analysis, have been used for the phage detection. In recent years, advanced methods such as flow cytometric method, petrifilm, enzyme linked immunosorbent assay (ELISA) and multiflex PCR diagnostic kit have been deveoloped. The phage contamination has been controlled by using heat, high-pressure treatment, and the combinations of heat and pressure, and/or chemical. Also some starter cultures with phage-resistant character have been developed to minimize the concentration of phages in dairy product. Bacteriophage inhibition media such as calcium medium was also mentioned. To prevent the contamination of bacteriophage in dairy industry, further researches on the detection and control of phage, and phage resistant starters are necessary in the future.

• Journal of the Ergonomics Society of Korea
• /
• v.16 no.2
• /
• pp.39-59
• /
• 1997

With a view to providing basic data for designing male's and female's clothes, healthy males and females(five each) were exposed to three different environmental temperature($20{\pm}1.0^{\circ}C$, $28{\pm}1.0^{\circ}C$, $32{\pm}1.0^{\circ}C$) in the nude. Their adaptation of skin temperature, physiological responses( rectal temperature, blood pressure, pulse rates) and psychological reactions(thermal, comfort and perceptive sweaty sensations) were analyzed as follows; The subjects's skin temperature had a similar look of adaptation, but the stability of skin temperature differed at tha $20{\pm}1.0^{\circ}C$ and at the $28{\pm}1.0^{\circ}C$ Males had higher skin temperature at three environmental temperatures, but females showed a higher temperature change at the $20{\pm}1.0^{\circ}C$ and $28{\pm}1.0^{\circ}C$ and males at the$32{\pm}1.0^{\circ}C$ Thus females were more resistant to the cold, while males were more resistant to the heat. As environmental temperature increased, rectal temperature and pulse rates also grew up. Females turned higher in rectal temperature and lower in blood pressure, but both sexes had a normal range of physiological reactions. Even though three environmental temperatures were same changes in thermal sensation at $28{\pm}1.0^{\circ}C$and in perceptive sweat sensation at $32{\pm}1.0^{\circ}C$, two sexes had the same response in comfort sensation at the three environmental temperatures.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.14 no.2
• /
• pp.161-170
• /
• 2002

A wind tunnel experiment was performed with the design wind speed of 50m/s to investigate the wind forces of Ieodo Ocean Research Station. The structure portion above water surface was modelled with 1/80 scale ratio. The wind force coefficients were determined from the force signals and compared to the results of a numerical study which was separately undertaken. Those results generally agreed well, and it is assured that the experimental data can be effectively used in the wind resistant design of the structure. Making use of the experimental force and pressure coefficients, the wind farce and moments acting on the overall upper structure of prototype are determined together with the wind pressures on local impervious facilities (main deck, solar panel and helideck).

• Tribology and Lubricants
• /
• v.39 no.1
• /
• pp.13-20
• /
• 2023

Large drill bits may face high hardness ore and high working pressure when working. To optimize the use effect of large drill bits and prolong the use time, it is necessary to add a layer of pressure-resistant, wear-resistant, and low-friction coating on the surface of the drill bit. In this study, CoCrNiAlTi high-entropy alloy coatings and CoCrNiAlTi (70 wt%)-TiC (30 wt%) composite coatings are successfully prepared on Q235 steel by plasma spraying. The CoCrNiAlTi (70 wt%)-TiC (30 wt%) coating consists of FCC solid solution and a small amount of TiC phase. The effect of TiC on the composition phase, microhardness, and elastic modulus of HEA coating is studied by X-ray diffractometer (XRD) and microhardness tester. The effect of TiC on the friction and wear properties of HEA coatings is investigated using a wear tester. By improving the process parameters, the metallurgical bonding between the coating and the substrate is well combined, and a coating without pores and cracks is obtained. The experimental results confirm that the microhardness, elastic modulus, and wear resistance of CoCrNiAlTi-TiC composite coating are better, and the friction coefficient is lower.

• Journal of Adhesion and Interface
• /
• v.7 no.3
• /
• pp.16-25
• /
• 2006

Water vapour permeable and water resistant film was laminated to made footwear woven fabric and non-woven fabrics by screen type with thermosetting reactive hot melt adhesive. Optimum conditions of each process were investigated, and the properties of film laminated fabric with optimum conditions are evaluated. The results are as follows. Thermosetting reactive polyurethane hot melt is retain proper heat resistance differently thermoplastic hot melt. Optimum melting adhesive process conditions are as follows ; drum temperature $95^{\circ}C$, hose temperature $97^{\circ}C$, feeding pipe temperature $100^{\circ}C$, screen temperature $105^{\circ}C$, pressure of opposite roller $1kgf/cm^2$, pressure of laminating roller $3kgf/cm^2$, finishing speed 15 m/min, melting temperature $120^{\circ}C$, cooling time 20 s, pressing temperature $130^{\circ}C$, pressing time 30 s. As the thickness of film was increased, the water vapour permeability was decreased but water resistance was increased, and the effect of film is dominant over all the others in the air permeability.

• Journal of Ocean Engineering and Technology
• /
• v.24 no.4
• /
• pp.23-31
• /
• 2010

The flow around a remotely-operated vehicle (ROV) has been investigated numerically to improve the resistant performance by modifying the hull form of the ROV. In the case of the base hull form considered in this study, form drag rather than friction drag was the dominant component of total drag. Subsequently, the surfaces that were most susceptible to local pressure effects were modified to give them a more streamlined shape. Eleven different hull forms were chosen to undergo surface modification for drag reduction. In addition, four different boat-tail appendages with different slant angles were installed at the stern to reduce the wake vortices that are induced by the local regions of very low pressure. Consequently, a total of 11 different hull forms for drag reduction were considered. The final hull form, which combined the hull for which surface modification resulted in the lowest drag with a boat-tail appendage with a 15-degree slant angle, resulted in a drag reduction of 20%.

• Childhood Kidney Diseases
• /
• v.11 no.1
• /
• pp.92-99
• /
• 2007

The posterior reversible encephalopathy syndrome(PRES) is characterized clinically by a combination of acute or subacute confusion, lethargy, visual disturbance, and seizures. PRES has been described in various clinical settings, including severe hypertension, chemotherapy, eclampsia, and seizure. We report a case of a 7-year-old girl who had taken cyclosporine for steroid resistant nephrotic syndrome. Twenty one days after the cyclosporine therapy, she was admitted due to generalized tonic clonic seizure and headache. Her blood pressure was 170/90 mmHg. Magnetic resonance(MR) imaging showed necrotic/cystic lesions involving the bilateral parieto-occipital region. After discontinuation of cyclosporine, and control of blood pressure, she had no more seizure and headache. The follow-up MR examination which was performed 6 months later showed the decreased extent of the lesion.

• The Plant Pathology Journal
• /
• v.31 no.2
• /
• pp.132-139
• /
• 2015

Bt-cotton germplasm, consisting of 75 genotypes was evaluated against cotton leaf curl disease (CLCuD) under high inoculum pressure in the field and using graft inoculation in glasshouse by visual symptom scoring assessments. None of the tested genotype was found disease free under both evaluation tests. Under field conditions in 2011, 3 genotypes were found resistant, 4 moderately resistant, 3 tolerant, 2 moderately susceptible and one susceptible; in 2012, 3 genotypes were tolerant, 7 moderately susceptible, 5 susceptible and 38 highly susceptible; in 2013, one was moderately susceptible and 51 were highly susceptible with varying degree of percent disease index (PDI) and severity index (SI). However, through graft evaluation in glasshouse, none of the graft inoculated plant was symptomless. All tested genotypes showed disease symptoms with SI values ranging between 5.0 and 6.0, and latent period between 12 and 14 days. Of the 75 genotypes evaluated using graft inoculation, 11 were found susceptible with SI values of 5.0 to 5.4 while remaining 64 were highly susceptible with SI values of 5.5 to 6.0. Inoculated plants of all tested genotypes exhibited severe disease symptoms within 10 days after the appearance of initial symptoms. No reduction in SI value was observed until the end of the experiment i.e., 90 days after grafting. Information generated under the present study clearly demonstrates that no sources of resistance to CLCuD are available among the tested Bt-cotton genotypes. So, a breeding programme is needed to introgress the CLCuD-resistance from other resistant sources to agronomically suitable Bt-cotton genotypes.

• Journal of the Korean Institute of Gas
• /
• v.26 no.1
• /
• pp.27-33
• /
• 2022

As the scale of explosions diversifies along with the expansion of gas handling and storage facilities, studies on explosion-proof facilities in preparation for accidents is being actively conducted. The gastight door blocks the expansion pressure caused by blast waves or internal fires, and at the same time protects the personnel and equipment inside. For gastight doors, the regulations related to explosion-proof design are not clearly presented, and studies on the explosion pressure resistance performance evaluation of the facility are insufficient. In this study, the gastight door was modeled in a 3D shape with reference to the regulation ASTM regarding the gastight door standard. Afterwards, evaluation for blast-resistant performance of gastight door using Numerical simulation was evaluated by using ANSYS Explicit Dynamics to compare the deformation.