• Title/Summary/Keyword: Pressure resistant

Search Result 243, Processing Time 0.024 seconds

A Study on the Oxidation Behavior of Metal Materials Applicable to Oxidizer Rich Pre-Combustor (산화제 과잉 연소기에 활용 가능한 금속재료의 산화 거동에 관한 연구)

  • Shin, Donghae;Yu, Isang;Shin, Minku;Ko, Youngsung;So, Younseok;Han, Yeoungmin
    • Journal of the Korean Society of Propulsion Engineers
    • /
    • v.23 no.2
    • /
    • pp.118-125
    • /
    • 2019
  • Metals exposed to high temperature/high pressure/oxidant excess environment of an oxygen excess pre-combustor may undergo rapid oxidation. In this study, the test facility to simulate the high temperature/high pressure/oxidant excess environment was constructed and the oxidation resistance evaluation was carried out for various metal materials. As a result, the discoloration of the metallic materials, the change in the surface roughness and the peeling of the metal surface were observed, and the weight change was also observed. The resulst showed that oxidation-resistant coating of a metal material of the combustor is indispensably required, and the use of XM-19, which has the highest content of Cr and Ni, is expected to provide more structural stability.

Improvement Scheme of Simplified Liquefaction Potential Evaluation for a Dredged and Reclaimed Ground (준설매립지반의 액상화 간편예측 개선에 관한 연구)

  • Jung, Min-Hyung;Kim, Ju-Hyun;Jeong, Sang-Guk;Lee, Song
    • Journal of the Korean Geotechnical Society
    • /
    • v.23 no.8
    • /
    • pp.47-57
    • /
    • 2007
  • In this study, the analysis of density characteristics of some dredged and reclaimed ground sites, which is necessary for liquefaction evaluation of a dredged and reclaimed ground, was conducted. From analyzing a simplified liquefaction potential evaluation using SPT-N values which have been applied as domestic earthquake-resistant design criterion, improvement scheme is suggested. Based on the analysis result of density characteristics, it was found out that the relative density and the intial N-value ranged respectively $40{\sim}50%\;and\;5{\sim}8$. In the case of applying Liao & Whitman's equation to correct effective overburden pressure, liquefaction resistance of the upper ground that is relatively weaker than that of lower ground is overestimated. So, Skempton's equation is recommended. And the N value with depth which is applied for design process should be estimated by the exponential equation, $N=1.35{\sigma}'^{0.75}$.

Whole-life wind-induced deflection of insulating glass units

  • Zhiyuan Wang;Junjin Liu;Jianhui Li;Suwen Chen
    • Wind and Structures
    • /
    • v.37 no.4
    • /
    • pp.289-302
    • /
    • 2023
  • Insulating glass units (IGUs) have been widely used in buildings in recent years due to their superior thermal insulation performance. However, because of the panel reciprocating motion and fatigue deterioration of sealants under long-term wind loads, many IGUs have the problem of early failure of watertight properties in real usage. This study aimed to propose a statistical method for wind-induced deflection of IGU panels during the whole life service period, for further precise analysis of the accumulated fatigue damage at the sealed part of the edge bond. By the estimation of the wind occurrence regularity based on wind pressure return period, the events of each wind speed interval during the whole life were obtained for the IGUs at 50m height in Beijing, which are in good agreement with the measured data. Also, the wind-induced deflection analysis method of IGUs based on the formula of airspace coefficient was proposed and verified as an improvement of the original stiffness distribution method with the average relative error compared to the test being about 3% or less. Combining the two methods above, the deformation of the outer and inner panes under wind loads during 30 years was precisely calculated, and the deflection and stress state at selected locations were obtained finally. The results show that the compression displacement at the secondary sealant under the maximum wind pressure is close to 0.3mm (strain 2.5%), and the IGUs are in tens of thousands of times the low amplitude tensile-compression cycle and several times to dozens of times the relatively high amplitude tensile-compression cycle environment. The approach proposed in this paper provides a basis for subsequent studies on the durability of IGUs and the wind-resistant behaviors of curtain wall structures.

Relaxant Actions of α2-Adrenoceptor Agonists in Rat Aorta (α2-Adrenoceptor Agonists의 흰쥐 대동맥 이완 작용)

  • Cho, In-gook;Lee, Sang-woo;Kang, Hyung-sub;Seo, Heyng-seok;Kim, Jin-shang
    • Korean Journal of Veterinary Research
    • /
    • v.43 no.3
    • /
    • pp.361-371
    • /
    • 2003
  • The vasorelaxant actions and blood pressure lowering of the ${\alpha}_2$-adrenoceptor agonists (${\alpha}_2$-AAs) clonidine and xylazine were investigated in rat isolated aortic rings and anesthesized rats. Both clonidine and xylazine produced a concentration-dependent inhibition of the sustained contraction induced by norepinephrine (NE), but not by KCl. NE-induced contractions were attenuated partly by nifedipine or verapamil, voltage dependent $Ca^{2+}$ channel blockers. These $Ca^{2+}$ channel blockers-resistant contractions were abolished by clonidine or xylazine. Inhibitory effects of a ${\alpha}_2$-AAs on contractions could be reversed by ryanodine, an intracellular $Ca^{2+}$, transport blocker, and tetrabutylammonium (TBA), a $Ca^{2+}$ activated $K^+$ channel blocker, but not by nifedipine, glibenclamide or removal of extracellular $Ca^{2+}$ and endothelium. Moreover, ${\alpha}_2$-AAs produced relaxation in NE-precontracted isolated intact aortic rings in a concentration-dependent manner, but not in KCl-precontracted rings. The relaxant effects of ${\alpha}_2$-AAs were inhibited by ryanodine and TBA, but not by nifedipine, glibenclamide, N (G)-nitro-L-arginine (L-NNA), N(omega)-nitro-L-arginine methyl ester (L-NAME), aminoguanidine (AG), 2-nitro-4-carboxyphenyl N,N-diphenylcarhurnte (NCDC), lithium sulfate, staurosporine or removal of extracellular $Ca^{2+}$ and endothelium. In vivo, infusion of xylazine elicited significant decrease in anerial blood pressure. This xylazinelowered blood pressure was completely inhibited by the intravenous injection of TBA, but not by the intravenous injection of glibenclamide, L-NNA, L-NAME, AG, nifedipine, lithium sulfate or saponin.. These findings showed that the receptor-mediated and ${\alpha}_2$-adrenoceptor A-stimulated endothelium-independent vasorelaxant effect may be explained by decreasing intracellular $Ca^{2+}$ release and activation of $Ca^{2+}$-activated $K^+$ channels, which may contribute to the hypotensive effects of ${\alpha}_2$-AAs in rats.

Structural Design Requirements and Safety Evaluation Criteria of the Spent Nuclear Fuel Disposal Canister for Deep Geological Deposition (심지층 고준위폐기물 처분용기에 대한 설계요구조건 및 구조안전성 평가기준)

  • Kwon, Young-Joo;Choi, Jong-Won
    • Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
    • /
    • v.5 no.3
    • /
    • pp.229-238
    • /
    • 2007
  • In this paper, structural design requirements and safety evaluation criteria of the spent nuclear fuel disposal canister are studied for deep geological deposition. Since the spent nuclear fuel disposal canister emits high temperature heats and much radiation, its careful treatment is required. For that, a long term(usually 10,000 years) safe repository for the spent nuclear fuel disposal canister should be secured. Usually this repository is expected to locate at a depth of 500m underground. The canister which is designed for the spent nuclear fuel disposal in a deep repository in the crystalline bedrock is a solid structure with cast iron insert, corrosion resistant overpack and lid and bottom, and entails an evenly distributed load of hydrostatic pressure from underground water and high pressure from swelling of bentonite buffer. Hence, the canister must be designed to withstand these high pressure loads. If the canister is not designed for all possible external loads combinations, structural defects such as plastic deformations, cracks, and buckling etc. may occur in the canister during depositing it in the deep repository. Therefore, various structural analyses must be performed to predict these structural problems like plastic deformations, cracks, and buckling. Structural safety evaluation criteria of the canister are studied and defined for the validity of the canister design prior to the structural analysis of the canister. And structural design requirements(variables) which affect the structural safety evaluation criteria should be discussed and defined clearly. Hence this paper presents the structural design requirements(variables) and safety evaluation criteria of the spent nuclear fuel disposal canister.

  • PDF

Transgenic Plants of Easter Lily (Lilium longiflorum) with Phosphinothricin Resistance

  • Ahn, Byung Joon;Joung, Young Hee;Kamo, Kathryn K.
    • Journal of Plant Biotechnology
    • /
    • v.6 no.1
    • /
    • pp.9-13
    • /
    • 2004
  • Transient uidA expression was used to optimize parameters required for biolistic transformation of suspension cells of Easter lily, Lilium longiflourm. Maximum uidA expression occurred following bombardment with gold particles as compared to tungsten. A 3hr pre-treatment of suspension cells with 0.125M osmoticum resulted in a 1.5X increase in uidA expression. A helium pressure of 1550 psi combined with a particle travelling distance of 6cm resulted in maximum uidA expression as compared to either 1100, 1200, or 1800 psi. Transient transformation resulted in up to 493 uidA expressing cells/Petri plate. For stable transformation suspension cells of Lilium longiflorum, were co-bombarded with plasmid DNA containing cucumber mosaic virus (CMV) replicase under the rice actin (Act1) promoter and either the bar or PAT genes under the cauliflower mosaic virus (CaMV 355) promoter. Ten regenerated plants contained the transgene as analyzed by PCR, and two of the ten plants were confirmed to contain the transgene by Southern hybridization. The two transgenic plants were independent transformants, one containing the bar gene and the other both the CMV replicase and bar genes. Plants were sprayed at the rosette stage and found to be resistant to 1000 mg/L of phosphinothricin (Trade name-Ignite) indicating expression of the bar gene throughout the leaves when bar was under control of the CaMV 35S promoter.

The Replacement Plans for Aged Public Water Supply Pipes in Apartment Buildings : Especially Apartment Buildings in Bucheon (공동주택의 노후 급수관 개선방안에 관한 연구 : 부천시 공동주택을 중심으로)

  • Lee, Yong-Hwa;Heo, Yong-Chul
    • Korean Journal of Air-Conditioning and Refrigeration Engineering
    • /
    • v.27 no.4
    • /
    • pp.228-232
    • /
    • 2015
  • The water supply galvanized steel pipes of apartment buildings in Bucheon city constructed with building permission before 1994 have many problems such as leaks, the water containing rust, and low water pressure due to corrosion. Therefore, this study aims to find a way to renew the water supply pipes under investigation through a survey. As a result, when replacing the galvanized steel pipe with the corrosion-resistant pipe, the water supply system should also be changed from the gravity tank system to the booster pump system and the hygienic water storage tank. It is necessary to redraft the long-term repair plan including the replacement of the water supply system. Also, it is necessary to save the allowance reserve according to the modified long-term repair plan.

Simultaneous Removal Characteristics of Particulate and Elemental Mercury in Convergence Particulate Collector (융합형여과집진장치에서의 먼지입자와 원소수은의 제거 성능 특성)

  • Park, Young Ok;Jeong, Ju Yeong
    • Particle and aerosol research
    • /
    • v.6 no.4
    • /
    • pp.173-183
    • /
    • 2010
  • The high temperature pleated filter bags which were used during this study were made of pleated nonwoven fabric of heat and acid resistant polysulfonate fibers which can withstand the heat up to $300^{\circ}C$ and have a filtration area which is 3 to 5 times larger than the conventional round filter bags. Cartridge module packed with 3 kind of the sulfur impregnated activated-carbon based sorbents were inserted in the inner of the pleated filter bag. This type of pleated filter bag was designed to remove not only the particulate matter but also the gaseous elemental mercury. The electrostatic precipitator part can enhance the particulate removal efficiency and reduce the pressure drop of the pleated filter bag by agglomerated particles to form a more porous dust layer on the surface of the pleated bag which is increased the filter bag cleaning efficiency. In addition, the most of particles are separated from the flue gas stream through the cyclone and the electrostatic precipitator part which were installed at the lower part and main body part of the convergence particulate collector, respectively. Thus reduce particulate loading of the high temperature pleated filter bags were applied in this study to analyze the removal characteristics of particulate matter and gaseous elemental mercury.

Immunomodulatory properties of medicinal maggots Lucilia sericata in wound healing process

  • Bohova, Jana;Majtan, Juraj;Takac, Peter
    • CELLMED
    • /
    • v.2 no.3
    • /
    • pp.23.1-23.7
    • /
    • 2012
  • The healing properties of medicinal maggots (larval stage of Lucilia sericata) are widely used in the chirurgical debridement of non-healing wounds including diabetic foot ulcers, venous and pressure ulcers, where classical approaches have failed. Several kinds of wounds are prone to complications coming out of a specific wound bed environment. There are multi-resistant bacterial species present, their pathogenic impact is multiplied by their ability to form a biofilm. Moreover, immunological events in chronic wounds differ from those in acute wounds. Non-healing wounds are cycled in the early inflammation phase with increased levels of inflammation attributes like inflammation cytokines and matrix metalloproteinases produced by inflammation phase cells. Application of larval therapy promotes progress in the healing process to the next stages involving tissue granulation and re-epithelisation. Larval debridement is an effective method of cleaning the wound of cell debris, necrotic tissue and bacterial load. This happens in a mechanical and biological manner, but the whole complex mechanism of the maggot healing activity is still not fully elucidated. Centuries of clinical practice brings noticeable proof of the maggots' beneficial effect in wound healing management. This long history led to the investigation of the bioactive components of the larval body and its extracts in vitro. We introduce a review which describes the immunomodulation impact of maggot body components on the cellular and molecular levels of the wound healing process.

Changes of the Physical Properties of Corrugated Fiberboard Boxes for Fruit and Vegetable Packaging by Preservation Temperature and Relative Humidity (과채류 포장용 골판지 상자의 저장온도와 습도에 따른 물리적 특성 변화)

  • Lee, Myung-Hoon;Cho, Jung-Yeon;Shin, Jun-Seop
    • Journal of Korea Technical Association of The Pulp and Paper Industry
    • /
    • v.34 no.1
    • /
    • pp.46-53
    • /
    • 2002
  • This study was carried out to analyze the effects of preservation temperature and relative humidity to the physical properties of corrugated fiberboard boxes for fruit and vegetable packaging. The preservation temperature did not affect severely to physical properties of corrugated fiber-board. Relative humidity was a major cause of corrugated fiberboard box quality deterioration. The burst and compressive strengths of experimental boxes measured with Mullen high pressure tester and tong crush tester were decreased gradually as relative humidity increased from 55% to 75%. But, the strength properties slightly decreased relative humidity at 75% or higher. This tendency was the greater for single wall (SW) corrugated fiberboard box than that for double wall (DW). It is suggested that development of the water-resistant corrugated fiberboard and box be needed that can be used under the condition of low temperature and high moisture content, which are being employed in the cold chain system.