• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.5
• /
• pp.565-574
• /
• 2009

The water vapor weighted vertically mean temperature(Tm) models, which were developed by the consideration of seasonal characteristics over the Korea, was used in the retrieval of precipitable water vapor (PWV) from GPS data which were observed at four GPS permanent stations. Since the weighted mean temperature relates to the water vapor pressure and temperature profile at a site, the accuracy of water vapor information which were estimated from GPS tropospheric wet delay is proportional to the accuracy of the weighted mean temperature. The adaption of Korean seasonal weighted mean temperature model, as an alternative to other formulae which are suggested from other nation, provides an improvement in the accuracy of the GPS PWV estimation. Therefore, it can be concluded that the seasonally appropriate weighted mean temperature model, which is used to convert actual zenith wet delay (ZWD) to the PWV, can be more reduced the relative biases of PWV estimated from GPS signal delays in the troposphere than other annual model, so that it would be useful for GPS PWV estimation with high accuracy.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.408-408
• /
• 2012

It is well known that magnetic random access memory (MRAM) is nonvolatile memory devices using ferromagnetic materials. MRAM has the merits such as fast access time, unlimited read/write endurance and nonvolatility. Although DRAM has many advantages containing high storage density, fast access time and low power consumption, it becomes volatile when the power is turned off. Owing to the attractive advantages of MRAM, MRAM is being spotlighted as an alternative device in the future. MRAM consists of magnetic tunnel junction (MTJ) stack and complementary metal- oxide semiconductor (CMOS). MTJ stacks are composed of various magnetic materials. FePt thin films are used as a pinned layer of MTJ stack. Up to date, an inductively coupled plasma reactive ion etching (ICPRIE) method of MTJ stacks showed better results in terms of etch rate and etch profile than any other methods such as ion milling, chemical assisted ion etching (CAIE), reactive ion etching (RIE). In order to improve etch profiles without redepositon, a better etching process of MTJ stack needs to be developed by using different etch gases and etch parameters. In this research, influences of $O_2$ gas on the etching characteristics of FePt thin films were investigated. FePt thin films were etched using ICPRIE in $CH_4/O_2/Ar$ gas mix. The etch rate and the etch selectivity were investigated in various $O_2$ concentrations. The etch profiles were studied in varying etch parameters such as coil rf power, dc-bias voltage, and gas pressure. TiN was employed as a hard mask. For observation etch profiles, field emission scanning electron microscopy (FESEM) was used.

• Korean Journal of Food Science and Technology
• /
• v.21 no.6
• /
• pp.780-787
• /
• 1989

The texturization properties of extrudate from isolated soybean protein and rice flour by extrusion cooking were investigated. The addition of up to 30% rice flur to isolated soy proetin could give more tenderness to the texturized extrudate. As the rice flour content increased, die temperature, nitrogen solubility index, and integrity index were decreased slightly with lower chewiness and gumminess. The water content of final extrudate was increased as the addition of rice flour increased, while density was maintained without variation, and rehydration ratio was decreased. The distribution of pressure profile during extrusion were in the range of $15-100kg/cm^3$. As the addition of rice flour increased, scanning electron micrographs demonstrated the gelatinized surface structure of rice starch and the increased air cell size of the testurized extrudate.

• Korean Chemical Engineering Research
• /
• v.43 no.1
• /
• pp.76-79
• /
• 2005

Dry etching of NiFe, NiFeCo, and Ta for magnetic random access memory (MRAM) by inductively coupled plasmas (ICPs) of $Cl_2/Ar$ has been carried out. NiFe and NiFeCo showed maximum etch rates at a particular ICP source power, but the etch rate of Ta increased with the ICP source power. The etch rates of the magnetic thin films increased with the RF chuck power, but decreased with the operating pressure and the $Cl_2$ concentration. To avoid a corrosion problem by chlorine, the etched samples were rinsed with de-ionized water for 5 minutes after etching. The etch profile showed a clean and smooth surface at 50% $Cl_2$ concentration.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.11a
• /
• pp.190-194
• /
• 2002

In this study, the etching of Au thin films have been performed in an inductively coupled CF4/Cl2/Ar plasma. The etch properties were measured as the CF4 adds from 0 % to 30 % to the Cl2/(Cl2 + Ar) gas mixing ratio of 0.2. Other parameters were fixed at a rf power of 700 W, a dc bias voltage of 150 V, a chamber pressure of 15 mTorr, and a substrate temperature of $30^{\circ}C$. The highest etch rate of the Au thin film was 370 nm/min at a 10 % additive CF4 into Cl2/(Cl2 + Ar) gas mixing ratio of 0.2. The surface reaction of the etched Au thin films was investigated using x-ray photoelectron spectroscopy (XPS) analysis. From x-ray photoelectron spectroscopy (XPS) analysis, the intensities of Au peaks are changed. There is a chemical reaction between Cl and Au. Au-Cl is hard to remove on the surface because of its high melting point and the etching products can be sputtered by Ar ion bombardment. We obtained the cleaned and steep profile.

• International Journal of Fluid Machinery and Systems
• /
• v.8 no.4
• /
• pp.264-273
• /
• 2015

This presentation describes an experimental approach for the detection of cavitation in hydraulic machines by use of ultrasonic signal analysis. Instead of using the high frequency pulses (typically 1MHz) only for transit time measurement different other signal characteristics are extracted from the individual signals and its correlation function with reference signals in order to gain knowledge of the water conditions. As the pulse repetition rate is high (typically 100Hz), statistical parameters can be extracted of the signals. The idea is to find patterns in the parameters by a classifier that can distinguish between the different water states. This classification scheme has been applied to different cavitation sections: a sphere in a water flow in circular tube at the HSLU in Lucerne, a NACA profile in a cavitation tunnel and two Francis model test turbines all at LMH in Lausanne. From the signal raw data several statistical parameters in the time and frequency domain as well as from the correlation function with reference signals have been determined. As classifiers two methods were used: neural feed forward networks and decision trees. For both classification methods realizations with lowest complexity as possible are of special interest. It is shown that two to three signal characteristics, two from the signal itself and one from the correlation function are in many cases sufficient for the detection capability. The final goal is to combine these results with operating point, vibration, acoustic emission and dynamic pressure information such that a distinction between dangerous and not dangerous cavitation is possible.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.9
• /
• pp.1499-1509
• /
• 2007

Proteomic analyses of synaptic vesicle fraction from rat brain have been performed for the better understanding of vesicle regulation and signal transmission. Two different approaches were applied to identify proteins in synaptic vesicle fraction. First, the isolated synaptic vesicle proteins were treated with trypsin, and the resulting peptides were analyzed using a high-pressure capillary reversed phase liquid chromatography/tandem mass spectrometry (cRPLC/MS/MS). Alternatively, proteins were separated by two-dimensional gel electrophoresis (2DE) and identified by matrix-assisted laser desorption ionization mass spectrometry (MALDI-TOF/MS). Total 18 and 52 proteins were identified from cRPLC/MS-MS and 2DE-MALDI-TOF-MS analysis, respectively. Among them only 2 proteins were identified by both methods. Of the proteins identified, 70% were soluble proteins and 30% were membrane proteins. They were categorized by their functions in vesicle trafficking and biogenesis, energy metabolism, signal transduction, transport and unknown functions. Among them, 27 proteins were not previously reported as synaptic proteins. The cellular functions of unknown proteins were estimated from the analysis of domain structure, expression profile and predicted interaction partners.

• The Korean Journal of Food And Nutrition
• /
• v.29 no.2
• /
• pp.290-299
• /
• 2016

This study was conducted to determine the association between dietary calcium intake and biomarkers related to lipid and glucose metabolism and inflammation in Korean patients with type 2 diabetes. Seventy-five subjects (41 males, 34 females) were recruited from a group of patients who had visited the department of endocrine medicine. Data on anthropometric characteristics, clinical indices such as hemoglobin A1c and C-reactive protein (CRP), and dietary nutrient intakes were collected. Subjects were divided into three groups on the basis of their calcium intake [< EAR (below estimated average requirement), EAR-RNI (between EAR and recommended nutrient intake), > RNI (above RNI)]. Average calcium intake of < EAR, EAR-RNI, > RNI groups were $462.7{\pm}18.7$, $649.7{\pm}12.8$, and $895.7{\pm}21.7mg$, respectively. Energy intake was not different among groups but intakes of protein, total and saturated fatty acids were significantly higher in > RNI group than < EAR group. Analysis of covariance revealed that HDL cholesterol level was significantly higher in EAR-RNI group, as compared to < EAR group after adjustment with confounders such as age, sex, BMI and energy intake (p < 0.05). Levels of CRP and homeostasis model assessment 2-insulin resistance (HOMA2-IR) were significantly lower in EAR-RNI group. Total cholesterol level was higher in EAR-RNI and > RNI groups, although within the normal range. Our results suggest that dietary calcium intake may influence the levels of HDL-cholesterol, CRP and HOMA2-IR and subsequently, help management/treatment of type 2 diabetes patients.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.27 no.4
• /
• pp.32-42
• /
• 1990

The method using Rankine Soure distribution over the hull surface and undisturbed free surface was applied to calculate the free surface flow around a ship. The ship hull as well as a local portion of the undisturbed free surface arc geometrically represented by quadrilateral panels and the source density is determined so as to satisfy the linearized free surface condition based on the double model flow. The pressure distribution, wave resistance, wave profile and hydrodynamic sinkage force and trim moment for the Wigley hull and the Series 60 hull with $C_B=0.60$ were calculated in the fixed condition. The calculated results were compared with the measured values. The dependance of the solution on the panel arrangement, particularly on the free suraface, was also studied through 11 numerical test cases for the Wigley hull.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.7
• /
• pp.1489-1496
• /
• 2009

This study was done for the determination and excretion profile of adrenosterone and its metabolites in human urine using both liquid chromatography with atmospheric pressure chemical ionization mass spectrometry and gas chromatography with mass spectrometry. Adrenosterone and its two metabolites were detected in human urine after administration a healthy volunteer with 75 mg of adrenosterone. We found that adrenosterone-M1 ($C_{19}H_{26}O_3$) was a reduction and adrenosterone-M2 ($C_{19}H_{26}O_4$) was a hydroxylation at C-ring, which did not know the exact position of the C-ring. The adrenosterone parent was detected by GC/TOF-MS, but not detected by LC/APCI/MS because of low intensity. Adrenosterone and its two metabolites were excreted as their glucuronided fractions. The recovery of this method ranged from 100.7 to 118.4% and the reproducibility and accuracy test were 85.5 to 112.0% and 1.1 to 8.4%, respectively. The excretion studies showed that adrenosterone and its metabolites were detectable in human urine during a 48 h period after oral administration, with maximum level of excretion at 4.1 h. The glucuro-/sulfaconjugated ratio of adrenosterone, M1 and M2 was 0.73 ${\pm}$ 0.03, 0.96 ${\pm}$ 0.06 and 0.89 ${\pm}$ 0.03 (n = 6), respectively. The amounts of adrenosterone excreted in urine were 14.75 ng for 48 h. Also, the maximum level of androsterone and 11$\beta$-hydroxy androsterone, which were endogenous steroids, were reached 4.1 h after the oral administration of adrenosterone.