• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.19 no.4
• /
• pp.251-258
• /
• 2016

Purpose: This study aimed to evaluate the utility of acanthosis nigricans (AN) severity as an index for predicting insulin resistance in obese children. Methods: The subjects comprised 74 obese pediatric patients who attended the Department of Pediatrics at Chosun University Hospital between January 2013 and March 2016. Waist circumference; body mass index; blood pressure; fasting glucose and fasting insulin levels; lipid profile; aspartate transaminase, alanine transaminase, glycated hemoglobin, C-peptide, and uric acid levels; and homeostatic model assessment insulin resistance (HOMA-IR) and quantitative insulin check sensitivity index (QUICKI) scores were compared between subjects with AN and those without AN. Receiver operating characteristic curves were used to investigate the utility of the AN score in predicting insulin resistance. HOMA-IR and QUICKI were compared according to AN severity. Results: The With AN group had higher fasting insulin levels ($24.1{\pm}21.0\;mU/L$ vs. $9.8{\pm}3.6\;mU/L$, p<0.001) and HOMA-IR score ($5.74{\pm}4.71$ vs. $2.14{\pm}0.86$, p<0.001) than the Without AN group. The AN score used to predict insulin resistance was 3 points or more (sensitivity 56.8%, specificity 83.9%). HOMA-IR scores increased with AN severity, from the Without AN group (mean, 2.15; 95% confidence interval [CI], 1.72-2.57) to the Mild AN (mean, 4.15; 95% CI, 3.04-5.25) and Severe AN groups (mean, 7.22; 95% CI, 5.08-9.35; p<0.001). Conclusion: Insulin resistance worsens with increasing AN severity, and patients with Severe AN (AN score ${\geq}3$) are at increased risk of insulin resistance.

• Journal of Preventive Medicine and Public Health
• /
• v.47 no.4
• /
• pp.216-229
• /
• 2014

Objectives: This study aims to investigate trends of cardiovascular disease (CVD) risk factor profiles over 17 years in percutaneous coronary intervention (PCI) patients at the Mayo Clinic. Methods: We performed a time-trend analysis within the Mayo Clinic PCI Registry from 1994 to 2010. Results were the incidence and prevalence of CVD risk factors as estimate by the Framingham risk score. Results: Between 1994 and 2010, 25 519 patients underwent a PCI. During the time assessed, the mean age at PCI became older, but the gender distribution did not change. A significant trend towards higher body mass index and more prevalent hypercholesterolemia, hypertension, and diabetes was found over time. The prevalence of current smokers remained unchanged. The prevalence of ever-smokers decreased among males, but increased among females. However, overall CVD risk according to the Framingham risk score (FRS) and 10-year CVD risk significantly decreased. The use of most of medications elevated from 1994 to 2010, except for ${\beta}$-blockers and angiotensin converting enzyme inhibitors decreased after 2007 and 2006 in both baseline and discharge, respectively. Conclusions: Most of the major risk factors improved and the FRS and 10-year CVD risk declined in this population of PCI patients. However, obesity, history of hypercholesterolemia, hypertension, diabetes, and medication use increased substantially. Improvements to blood pressure and lipid profile management because of medication use may have influenced the positive trends.

• Childhood Kidney Diseases
• /
• v.9 no.2
• /
• pp.255-262
• /
• 2005

Battler and Bartter-like syndromes, which include classic Bartter syndrome(type III), neonatat Bartter syndrome(type I, II or IV) and Gitelman syndrome, are autosomal - recessively inherited renal tubular disorders characterized b)r hypokalemic metabolic alkalosis, salt wasting and normal to low blood pressure. Neonatal Bartter syndrome is characterized by intrauterine polyhydramnios, premature delivery, life-threatening episodes of fever and dehydration, subsequent failure to thrive, and severe hypercalciuria with nephrocalcinosis and osteopenia. It is caused by mutations in NKCC2(type I), ROMK(type II) or BSND(type IV) genes. If diagnosed and treated early, the progression to renal failure can be prevented and catch-up growth and normal development are achieved. We report here a 6 month-old infant with neonatal Bartter syndrome who presented with hypokalemic metabolic alkalosis, polyhydramnios and premature delivery, persistent high fever and dehydration, failure to thrive, hypercalciuria, and nephrocalcinosis. He received indomethacin and potassium chloride per os and show ed catch-up growth and normal developmental profile at 19 months of age. (J Korean Soc Pediatr Nephrol 2005;9:255-262)

• Fisheries and Aquatic Sciences
• /
• v.17 no.2
• /
• pp.159-165
• /
• 2014

In this study, Krill Eupausia superba oil was extracted using different solvents and supercritical carbon dioxide (SC-$CO_2$). During SC-$CO_2$ extraction, the pressure was set at 40 MPa and temperatures ranged from $40^{\circ}C$ to $55^{\circ}C$. We examined the differences in volatile compounds and safety profiles among extraction methods. Volatile compounds were determined using the thermal desorption system integrated with gas chromatography-mass spectrometry (GC-MS). Heavy metal content was analyzed by inductively coupled plasma mass spectrometry (ICP-MS). According to our results 10 volatile compounds were identified in krill sample. After SC-$CO_2$ extraction of oil, the concentrations of volatile compounds decreased, but increased after solvent extraction. In krill, heavy metal concentrations remained within the permissible limit. Moreover, Zn and Fe which have health benefits were detected at high concentrations. During a 90 days storage period at different temperatures, microbial activity was found to be lowest in SC-$CO_2$ extracted residues. Thus, the quality of krill oil and the residues obtained using SC-$CO_2$ extraction was higher and the oil was safer than those obtained using conventional solvent extraction. These results can be applied to the food industry to maintain high quality krill products.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2003.10a
• /
• pp.271-277
• /
• 2003

Recently as the environmental noise getting influential social problem, it is the fact that the demand on noise reduction increases with the advance of the standard of living. Therefore increasing the interest on the noise in common, it is eagerly demanded that the endeavour for reducing the noise of the rotating machinery, especially the machinery related a flowing including the household electric products, which is pointed out the primary noise source in environment. As proceeding study for fan noise, theory of fan noise property is arranged and this control method is shown. Blade passage noise of total noise spectrum. Thus in the aspect of noise reduction, noise source and identification of noise radiation characteristics of axial flow fan are demanded in detail. The sound source is analyzed by using sound pressure and sound intensity. In that time, synchronization of axial flow fan using optical sensor is executed, and to identify the location of exact noise source in the fan profile determination of recording time is proposed. In the rotating of tan, it is explained that the location of noise source exists in and by the directivity, the noise radiation pattern of axial flow fan is determined and the flow of sound is visualized in the figure of contour mapping.

• Journal of Families and Better Life
• /
• v.22 no.4
• /
• pp.43-61
• /
• 2004

The purpose of this study was to verify the usefulness of kinetic House- Tree- Person drawing as a diagnostic measure for the degree of self-differentiation, which is an essential part of college students' development. Participants for the study were four hundred thirty five(272 male and 163 female) university freshmen enrolled in 4-year colleges located in Pusan. The Participants completed a scale of self-differentiation and a Kinetic House- Tree-Person drawings test. The evaluation system for kinetic House-Tree-Person drawings was established based on the indexes of Buck(1948) and Bums(1972) and used exiting literatures as reference. The data were analyzed using means, standard deviations, t-test, one-way ANOVA, and Scheffe's test. The results obtained from the study are as follows: First, the mean level of college students' self-differentiation was 2.81, which is about average. Some significant gender differences were found in the areas of self-intergration, family projection, and emotional separation. Male students scored higher on self-intergration, whereas female students score higher on family projection and emotional separation. Second. self-differentiation was higher when the student drew a house with smoke coming out of the chimney, a single-story house with flat roof, or with detailed description of curtains, roof and roof tiles. Third, self-differentiation seemed to be higher when branches and fruits were included, when there was no expression of roots, when large crowns and branch openings were presented, and when no slant lines or base lines appeared. Forth, self-differentiation showed ㅁ higher level when the portrait shows eyes, mouth and neck without omission, when it included the whole body instead of face only, and when there was no person with just a profile, a back, or with a stiff posture, and when there was no weak and thin lines. Individuality also marked higher if a person was in motion and than one person was added. Finally, self-differentiation showed significant difference according to the overall harmony of the drawing, ordering of contents, hand pressure, the kind and shape of tree, and presence of other persons. The more harmonious the picture was, and the more family members are added, the higher the level of self-differentiation was.

• Journal of Environmental Health Sciences
• /
• v.19 no.2
• /
• pp.23-33
• /
• 1993

The anaerobic digestion of organic synthetic wastewater in anaerobic fluidized bed bioreactor (AFBBR) and anaerobic fluidized packed bed bioreactor (AFPBBR) was studied. This study was conducted to evaluate efficiency and reliability of two reactor. Experiment was performed to find the effect of upflow rate with AFBBR and the height of packed bed with AFPBBR. As a result, this program obtained several conclusion. These are given as follows: As applied the upflow rate increased in AFBBR the produced volume of biogas increased, while the gas production and COD removal decreased at above 0.3 m$^3$/h. When a upflow rate is 0.4 m$^3$/h in AFBBR the volatile suspended solid (VSS) became significantly increased. At an organic loading rate from 0.1 to 0.4 of upflow rate in AFBBR, the methane yield was 1.5584 m$^3$CH$_4$/kgCOD removed, and the observed cell yield coefficient was 0.0933 gVSS/gCOD. In case of AFPBBR, the results showed also that 20 cm of height of packed bed was superior to other in the aspect ot biogas production, the content of methane and COD removal. At 20 cm of height, the profile of microorganisms was stable, while at 30 cm the VSS of effluent became higher than AFBBR. Though COD removal of AFPBBR increased with packed bed, COD removal deteriorate with over packing because the loss of pressure became higher in the reactor. At an organic loading rate from 20 to 40 cm of packed bed in-AFPBBR, the methane yield was 2.5649 m$^3$CH$_4$/kgCOD removed, and the observed cell yield coefficient was 0.0506 gVSS/gCOD. Based upon the results obtained, it is suggested that AFBBR and AFPBBR is the most effective conditions at 0.3 m3/h of upflow rate, the 20cm of packed bed, respectively. The rate constant are summarized as follow:

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.2
• /
• pp.93-98
• /
• 2001

YMnO$_3$ films are excellent gate dielectric materials of ferroelectric random access memories (FRAMs) with MFSFET (metal -ferroelectric-semiconductor field effect transistor) structure because YMnO$_3$ films can be deposited directly on Si substrate and have a relatively low permittivity. Although the patterning of YMnO$_3$ thin films is the requisite for the fabrication of FRAMs, the etch mechanism of YMnO$_3$ thin films has not been reported. In this study, YMnO$_3$thin films were etched with Cl$_2$/Ar gas chemistries in inductively coupled plasma (ICP). The maximum etch rate of YMnO$_3$ film is 285$\AA$/min under Cl$_2$/(Cl$_2$+Ar) of 1.0, RF power of 600 W, dc-bias voltage of -200V, chamber pressure of 15 mTorr and substrate temperature of $25^{\circ}C$. The selectivities of YMnO$_3$ over CeO$_2$ and $Y_2$O$_3$ are 2.85, 1.72, respectively. The selectivities of YMnO$_3$ over PR and Pt are quite low. Chemical reaction in surface of the etched YMnO$_3$ thin films was investigated with X-ray photoelectron spectroscopy (XPS) surface of the selected YMnO$_3$ thin films was investigated with X-ray photoelectron spectroscopy(XPS) and secondary ion mass spectrometry (SIMS). The etch profile was also investigated by scaning electron microscopy(SEM)

• Journal of Mechanical Science and Technology
• /
• v.19 no.11
• /
• pp.2032-2039
• /
• 2005

The lattice Boltzman method (LBM) and the finite difference-based lattice Boltzmann method (FDLBM) are quite recent approaches for simulating fluid flow, which have been proven as valid and efficient tools in a variety of complex flow problems. They are considered attractive alternatives to conventional finite-difference schemes because they recover the Navier-Stokes equations and are computationally more stable, and easily parallelizable. However, most models of the LBM or FDLBM are for incompressible fluids because of the simplicity of the structure of the model. Although some models for compressible thermal fluids have been introduced, these models are for monatomic gases, and suffer from the instability in calculations. A lattice BGK model based on a finite difference scheme with an internal degree of freedom is employed and it is shown that a diatomic gas such as air is successfully simulated. In this research we present a 2-dimensional edge tone to predict the frequency characteristics of discrete oscillations of a jet-edge feedback cycle by the FDLBM in which any specific heat ratio $\gamma$ can be chosen freely. The jet is chosen long enough in order to guarantee the parabolic velocity profile of a jet at the outlet, and the edge is of an angle of $\alpha$=23$^{o}$. At a stand-off distance w, the edge is inserted along the centerline of the jet, and a sinuous instability wave with real frequency is assumed to be created in the vicinity of the nozzle exit and to propagate towards the downstream. We have succeeded in capturing very small pressure fluctuations resulting from periodic oscillation of the jet around the edge.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.11a
• /
• pp.156-157
• /
• 2005

Gas hydrate is ice-like crystalline lattice, formed at appropriate temperature and pressure, in which gas molecules are trapped. It is worldwide popular interesting subject as a potential energy. In korea, a seismic survey for gas hydrate have performed over the East sea by the KIGAM since 1997. In this paper, we had conducted numerical and physical modeling experiments for seismic properties on gas hydrate with field data which had been acquired over the East sea in 1998. We used a finite difference seismic method with staggered grid for 2-D elastic wave equation to generate synthetic seismograms from multi-channel surface seismic survey, OBC(Ocean Bottom Cable) and VSP(Vertical Seismic Profiling). We developed the seismic physical modeling system which is simulated in the deep sea conditions and acquired the physical model data to the various source-receiver geometry. We carried out seismic complex analysis with the obtained data. In numerical and physical modeling data, we observed the phase reversal phenomenon of reflection wave at interface between the gas hydrate and free gas. In seismic physical modeling, seismic properties of the modeling material agree with the seismic velocity estimated from the travel time of reflection events. We could easily find out AVO(Amplitude Versus Offset) in the reflection strength profile through seismic complex analysis.