• Journal of Mechanical Science and Technology
• /
• v.16 no.8
• /
• pp.1154-1164
• /
• 2002

Losses on the turbine consist of the mechanical loss, tip clearance loss, secondary flow loss and blade profile loss etc.,. More than 60 % of total losses on the turbine is generated by the two latter loss mechanisms. These losses are directly related with the reduction of turbine efficiency. In order to provide a new design methodology for reducing losses and increasing turbine efficiency, a two-dimensional axial-type turbine blade shape is modified by the optimization process with two-dimensional compressible flow analysis codes, which are validated by the experimental results on the VKI turbine blade. A turbine blade profile is selected at the mean radius of turbine rotor using on a heavy duty gas turbine, and optimized at the operating condition. Shape parameters, which are employed to change the blade shape, are applied as design variables in the optimization process. Aerodynamic, mechanical and geometric constraints are imposed to ensure that the optimized profile meets all engineering restrict conditions. The objective function is the pitchwise area averaged total pressure at the 30% axial chord downstream from the trailing edge. 13 design variables are chosen for blade shape modification. A 10.8 % reduction of total pressure loss on the turbine rotor is achieved by this process, which is same as a more than 1% total-to-total efficiency increase. The computed results are compared with those using 11 design variables, and show that optimized results depend heavily on the accuracy of blade design.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.47-48
• /
• 2007

A CMP Process has many factors that affect result of a polished wafer. Dominant factors are velocity, pressure and temperature in process. A pad profile is also considered as affecting factor of CMP. Accoding to variation of a pad profile, the each pan of a wafer is differently pressured. It appears to affect the uniformity of a wafer. A pad profile varies as a swing arm conditioner which have been ordinarily used in industry. A swing arm conditioner has several sectors in its swing path. This study aims that a wafer get a good uniformity as swing arm conditioner's path on pad is analyzed and simulated. Through the simulation, tendency of pad profile after conditioning will be predicted and the result of simulation compared with the result of experiment. The optimized pad profile would be made by to vary swing arm's velocity on each sector. In order to maintain the optimized profile, conditioner design or swing arm's velocity should be changed and designed.

• Journal of Korean Society of Disaster and Security
• /
• v.6 no.2
• /
• pp.49-56
• /
• 2013

In this paper, used by the boundary layer wind tunnel test, have conducted a series of wind tunnel experiments, i.e. test the mean velocity profile regarding the surface roughness, turbulence intensity and power spectrum measured by augmentation device. After that, to provide data relevant for the preliminary design step of tall building hazard fluctuating wind loads may be obtained fluctuating pressure coefficients, fluctuating pressure spectrum, autocorrelation coefficients by the boundary layer wind tunnel test. From the results of experiments, this study can be obtained conclusions as follows. 1. We know the fact that the mean velocity profile and the turbulence intensity are well fitted natural wind flow in the boundary layer wind tunnel. 2. The satisfactory agreement of velocity spectrum can be obtained from the compare of fluctuating power spectrum and Von Karman spectrum. 3. We know the fact that the fluctuating pressure spectrums distributed peak at 0.01 Hz-0.1 Hz in the windward surfaces and at 0.1 Hz in the leeward surfaces. 4. We know the fact that the autocorrelation coefficients distributed stationary random processes with application time of hazard fluctuating wind loads.

• Transactions of Materials Processing
• /
• v.21 no.7
• /
• pp.426-431
• /
• 2012

The work roll of a Sendzimir mill has a small diameter in comparison to its length, so it is easily deformed by the rolling pressure. It also has a complex back up roll system, so it is difficult to analyze the roll deformation. For this reason in Part I we have developed a model which predicts the radial displacement of the roll. In this paper, we apply the model to a Sendzimir mill and propose a new model for the prediction of the deformed roll profile in a Sendzimir mill. The prediction accuracy of the new model is demonstrated through comparison of the predictions from the FE model.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1998.04a
• /
• pp.198-205
• /
• 1998

Recently, according as the supply of power steering system has been diffused, for the comfortable driving condition, the problem to reduce the noise and vibration of this system suddenly appeared. This system can be classified two systems of the pipe line and the pump. In this paper, it is described about the noise characteristic with the camring profile of the hydraulic vane pump. As a result, when it excesses tolerance, the noise is increased. Moreover, in the case of the same of cam-ring, the effect of the rotating speed is larger than the discharge pressure.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1999.11a
• /
• pp.25-34
• /
• 1999

In this study, the sliding wear in spur gears, using Archard's wear model, is analyzed. Formulas of tooth sliding wear depth along the line of action are derived. The tooth profile is modified Id make a smooth transmission of the normal loads and the cylinder profile for reducing the pressure spike is suggested. The sliding wear rate is calculated with these profiling results. We expect these modification methods to contribute to the reduction of sliding wear in the root and the tip of tooth and tooth edge.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.04a
• /
• pp.19-22
• /
• 2009

It is essential to predict the deformed roll profile for the prediction of the strip profile in rolling process. The work roll of the Sendzimir mill has a small diameter in comparison to a barrel length, so that it is well deformed by the rolling pressure. Also it has a complex roll system, so it is difficult to analyze the roll deflection. In this paper, 3D finite element method is used for the analysis of the roll deflection of the Sendzimir due to the contact between rolls. But it takes much time to get the results, so that the on-line model to evaluate the radial deformation of a roll is developed on the basis of the finite element method.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.10a
• /
• pp.422-427
• /
• 2000

Gear design carried in former type determined a few variables like module, pressure angle, helix angle. After investigating repeatedly results obtained through stress analysis and making a determination an optimal shape, but its design process was not only complex but also difficult to get a precise profile curve from operating by hand. In this study, rotating shape of gear profile curves were generated automatically with standard spur gear, equivalent helical gear, shifted gear & pinion by using developed program which is Auto_LISP language supported in Auto-CAD. Output tooth profile by using CAE program is applied as Preprocessor for stress analysis in each contact points. This program which can be determined rapidly an optimal shape of gear will be successfully supported for Small & Medium companies designing and manufacturing gears by using Auto-CAD.

• Journal of the korean Society of Automotive Engineers
• /
• v.11 no.4
• /
• pp.35-42
• /
• 1989

The major purpose of this paper is a study on the effect of die profile radius on the formability of spring-type blankholder system in deep drawing process. By drawing the various materials, formability is studied by means of checking the drawing force, blankholding force variation, limiting drawing ratio and wall wrinkling phenomenon. As the die profile radius increases, the maximum drawing force and maximum blankholding force decrease regardless of lubrication condition. Because better lubrication induces blankholding force to rise, spring type blankholder system is better to protect flange wrinkling phenomenon than constant pressure type. And wall wrinkling phenomenon was not detected in experimental die radius range, so the Miyakawa's upper wrinkling limit is understimated in case of material tested.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.212-212
• /
• 2010

최근 차세대 반도체 메모리 소자로 대두된 magnetic random access memory(MRAM)에 대한 연구가 활발히 진행되고 있다. 특히 MRAM의 magnetic tunnel junction(MTJ) stack을 구성하는 자성 재료의 건식 식각에 대한 연구에서는 좋은 profile을 얻고, 재층착의 문제를 해결하기 위한 노력이 계속해서 진행되고 있다. 본 연구에서는 photoresist(PR)과 Ti 하드 마스크로 패턴 된 배리어(barrier) 층인 MgO 박막의 식각 특성을 유도결합 플라즈마를 이용한 고밀도 반응성 이온 식각(inductively coupled plasma reactive ion etching-ICPRIE)을 통해서 연구하였다. PR 및 Ti 마스크를 이용한 자성 박막들은 HBr/Ar, HBr/$O_2$/Ar 식각 가스의 농도를 변화시키면서 식각되었다. HBr/Ar 가스를 이용 식각함에 있어서 좋은 식각 조건을 얻기 위한 parameter로서 pressure, bias voltage, rf power를 변화시켰다. 각 조건에서 Ti 하드마스크에 대한 터널 배리어층인 MgO 박막에 selectivity를 조사하였고 식각 profile을 관찰하였다. 식각 속도를 구하기 위해 alpha step(Tencor P-1)이 사용되었고 또한 field emission scanning electron microscopy(FESEM)를 이용하여 식각 profile을 관찰함으로써 최적의 식각 가스와 식각 조건을 찾고자 하였다.