• 한국해양공학회지
• /
• 제15권2호
• /
• pp.99-104
• /
• 2001

Elastic-plastic fracture toughness $J_{lc}$ can be used as an effective design criterion in elastic plastic fracture mechanics. Most of these systems are$J_{lc}$ $J_{lc}$ value at high temperature must be determined for use of integrity evaluation and designing of such systems. Elastic-plastic fracture toughness $J_{lc}$ tests were performed on SA516/70 carbon steel plate and test results were analyzed according to ASTM E 813-87, ASTM E 813-89 and ASTM E 1152-87.safety and integrity are required for reactor pressure vessels because, they are operated in high temperature. There are single specimen method, which used as evaluation of safety and integrity for reactor pressure vessels. In this study, elastic-plastic fracture toughness($J_{lc}$) and J-$\Delta$a of SA 516/70 steel used as reactor pressure vessel steel are measured and evaluated at room temperature, 150$^{\circ}C $, 250$^{\circ}C $ and 370$^{\circ}C $ according to unloading compliance method.

• 한국안전학회지
• /
• 제20권3호
• /
• pp.71-77
• /
• 2005

This study aims to find the safe vent area to prevent a destruction of building by gas explosion in a building. Explosion vessel which used in this experiment is 1/5 scale down model of simple livingroom and its dimension is 100cm in length 60cm in width and 45cm in height. Liquified petroleum gas(LPG) was injected to the vessel to the concentration of 4.5vol%, and injection rate were varied in 1L/min or 4L/min. Gas mixture was ignited by the 10kV electric spark. For analysis the characteristics of vented explosion pressure according to the vent size and vent shape, its size and shape were varied. From the experiment, it was found that explosion pressure in the vented explosion :in affected by the gas injection rate, vent area and vent shape. And the vent area to volume ratio(S/V) to prevent the building destruction by explosion pressure, it is recommended that the design of vent area happened by the explosion should be above 1/500cm in S/V. And if the vent area has complicate structure in same area, vented explosion pressure will be higher than a single vent, and possibility of building destruction will increase. Therefore to effectively vent the explosion pressure for protect a building and residents from the gas explosion hazards, the same vent area should have a singular and constant shape in the cross-sectional area of the vessel.

• 대한기계학회논문집A
• /
• 제24권8호
• /
• pp.2083-2090
• /
• 2000

In order to manage nuclear power plants safely and cost effectively, it is necessary to develop integrity evaluation methodologies for the main components. Recently, the integrity evaluation techniques were broadly studied regarding the license renewal of nuclear power plants which were approaching their design lives. Since the integrity evaluation process requires special knowledges and complicated calculation procedures, it has been allowed only to experts in the specified area. In this paper, an integrity evaluation system for reactor pressure vessel was developed. RVIES(Reactor Vessel Integrity Evaluation System) provides four specific integrity evaluation procedures covering PTS(Pressurized Thermal Shock) analysis, P-T(Pressure-Temperature) limit curve generation, USE(Upper Shelf Energy) analysis and Fatigue analysis. Each module was verified by comparing with published results.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.102-107
• /
• 2004

In general, major components of nuclear power plant have been evaluated based on 2-dimensional design codes conservatively. However, more exact assessment is necessary for continued operation beyond the design life. In this paper, 3-dimensional stress and fatigue analyses reflecting full geometry and monitored operating condition of reactor pressure vessel have been carried out. The analyses results showed that conservatism of current 2-dimensional evaluation based on design transient. Therefore, it is anticipated that the schemes developed from this research such as 3-dimensional finite element modeling, stress analysis and fatigue analysis related techniques can be utilized as fundamental tools for exact lifetime evaluation and license renewal of major nuclear components.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.349-352
• /
• 2008

In this study, a design method of developed shape for double-curved pressure vessel segment heads was proposed in consideration of in-plane strain induced by forming works. In order to obtain the developed shape of double-curved plate, at first, the segments are subdivided into elements and then they are stacked into a series of strips producing the outline of the approximately developed shape. The developed shape was determined by imposing the in-plane displacement obtained from forming analysis and regression analysis on the outline of the approximately developed shape. The validation of the proposed design method was verified by applying it to the actual products.

• 한국정밀공학회지
• /
• 제29권1호
• /
• pp.103-108
• /
• 2012

Restenosis symptom, which is well known as a problem of stents, is due to the recoil and expansion pressure depending on shapes of stent. In order to reduce the effect of recoil problem, study on pattern and shape for the stent is required and the expansion pressure and recoil should be evaluated. This paper aims at evaluating mechanical characteristics of stent used in surgery for vessel stenosis. The expansion process of coronary artery stent in vessel for two models including the Cypher$^{(R)}$ from Johnson & Johnson$^{TM}$ and a suggested model were simulated using the Finite Element Analysis. Comparison of the directional recoil simulation results was made. The issues in the deformed shape of vessel and recoil of Cypher$^{(R)}$ were partially resolved in the suggested model. Therefore, the shape design suggested in this paper was able to reduce the restenosis symptom.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2005년도 특별논문집
• /
• pp.138-143
• /
• 2005

Recently, it is much more required to approach the accurate shaft alignment analysis according to the tendency of active showing in large container vessel and that of the heavy weight of propeller in connection with it. Shaft alignment calculation lies upon how the pressure apply on bearings properly in operation of main engine and how the stress of shaft puts within that of limit of bearing material and how the movement of shaft is prospected owing to propeller forces and moments. Therefore, we have conducted the shaft alignment calculation of very large container vessel considering the deformation of hull structure and the propeller forces and moments and the static and dynamic condition of shaft. The calculation results show the pressure distribution of aft bush and the movement of shaft in bearing. The shaft alignment calculation helps the stable application of shaft alignment, which was proved in sea trial.

• 항공우주시스템공학회지
• /
• 제17권6호
• /
• pp.127-132
• /
• 2023

본 연구에서는 필라멘트 와인딩 공법을 적용한 Type 4 압력용기의 설계를 수행하였다. 수소저장용 탱크의 설계인 점을 고려하여 누설을 방지하기 위해 라이너는 고분자 고밀도 폴리에틸렌(HDPE)을 적용하였고 복합재 구조는 카본/에폭시를 Hoop 방향과 Helical 방향으로 적층하여 설계하였다. 이론적 접근으로 Helical 섬유의 각도와 Hoop, Helical 각각의 섬유 두께를 결정하여 설계하였다. 설계에 대한 안전성은 상용소프트웨어인 ANSYS를 활용하여 유한요소 해석으로 검증하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1581-1584
• /
• 2007

The safety valve is the important equipment used to protect the pressure vessel and pressure facilities from overpressure by discharging the operation medium when the pressure of system is reaching the design pressure of the system. Some materials for a safety valve disk are studied in this paper. A studied safety valve has to resist sulfurous acid and nitric acid. etc. Furthermore teflon which is a general material of the valve easily sticks to a disk and a sliding part of the valve by thermal expansion. Therefore both teflon and stainless-steel are used to improve these problems. The analysis of the thermal expansion is conducted with commercial FEM software to improve the problems. Boundary conditions were temperature and load in this study. From the analysis, the thermal expansion of by teflon/stainless steel-made valve is lower than that of teflon-made valve under high temperature. Thus, teflon/stainless steel-made valve is safe and no malfunction by thermal expansion.

• Composites Research
• /
• 제21권1호
• /
• pp.1-7
• /
• 2008

복합재 고압 용기는 우수한 기계적 강도를 유지하면서 경쟁적인 무게절감을 얻을 수 있는 복합재의 장점으로 인해 최근에 많이 사용되고 있다. 하지만 고압에서 발생하는 복합재의 기밀 문제(permeability)를 보완하기 위해 금속으로 덧대는 Type 3 형태의 구조로 많이 사용된다. 그러나 복잡한 기하학적 형상, 제조공정 변수 등으로 인해 차입 3 형태의 압력용기를 설계하는 데에는 많은 어려움이 뒤따른다. 따라서 본 연구에서는 이러한 변수들을 고려하는 준측지궤적 알고리즘(semi-geodesic algorithm)과 최적화를 위한 유전자 알고리즘을 적용하여 차입 3 복합재 압력용기의 GUI(graphic user interface) 최적설계 프로그램을 개발하였다. 또한 개발된 프로그램을 이용하여 연료 전지 자동차에 적용되는 350/700 바 수소저장용기에 대해 최적 설계를 수행하였다.