• Geomechanics and Engineering
• /
• 제7권5호
• /
• pp.569-587
• /
• 2014

Triaxial compression creep tests were performed on salt rock samples using cyclic confining pressure with a static axial pressure. The test results show that, up to a certain time, changes in the confining pressure have little influence on creep properties of salt rock, and the axial creep curve is smooth. After this point, the axial creep curve clearly fluctuates with the confining pressure, and is approximately a straight line both when the confining pressure decreases and when it increases within one cycle period. The slope of these lines differs: it is greater when the confining pressure decreases than when it increases. In accordance with rheology model theory, axial creep equations were deduced for Maxwell and Kelvin models under cyclic loading. These were combined to establish an axial creep equation for the Burgers model. We supposed that damage evolution follows an exponential law during creep process and replaced the apparent stress in creep equation for the Burgers model with the effective stress, the axial creep damage equation for the Burgers model was obtained. The model suitability was verified using creep test results for salt rock. The fitting curves are in excellent agreement with the test curves, so the proposed model can well reflect the creep behavior of salt rock under low-frequency cyclic loading. In particular, it reflects the fluctuations in creep deformation and creep rate as the confining pressure increasing and decreasing under different cycle periods.

• 한국항공우주학회지
• /
• 제34권11호
• /
• pp.70-75
• /
• 2006

조종실 여압시스템은 압력스케쥴, 압력조절 공차, 정상 및 비정상 작동시의 최대 압력변화율 및 조종실로 유입되는 최대 공기변화량과 같은 설계한계에 적절히 응답하도록 설계하여야 한다. 본 논문에서는 T-50 고등훈련기 조종실 여압시스템에 대한 압력강하 해석과 비행시험결과가 소개되었다. 압력강하 해석을 통하여 여압밸브의 출구면적을 계산한 후 무여압 구간에서의 압력공차를 예측하였다. 예측된 결과를 이용하여 D사의 여압부품을 선정하였고, 예측된 압력공차는 비행시험의 결과와 잘 일치하였다. 결론적으로 비행시험을 통하여 T-50 고등훈련기 여압시스템이 MIL-E-18927 설계기준을 만족하였다

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.807-812
• /
• 2011

한국형발사체 1단에 사용될 75톤급 액체로켓엔진 연소기의 기술검증시제를 설계, 제작하여 연료수류시험을 수행하였다. 가압압력을 조절하여 연료 유량을 변경함으로써 주어진 유량에서 발생하는 연소기 재생냉각 채널에서의 압력 손실을 측정하였다. 연소실 각 부에서의 압력 손실을 측정할 수 있었으며, 상당량의 압력 손실이 유속이 강한 연소실 노즐목부에서 발생함을 확인하였다. 주어진 연료 수류시험 조건에서 수력학 해석을 통하여 수력학 해석 방법의 정확도를 검증할 수 있었다.

• 한국산학기술학회논문지
• /
• 제14권11호
• /
• pp.5923-5929
• /
• 2013

최근 국내에서도 구조물의 안정성을 향상시키고 수평토압의 크기를 줄여주는 선반식 옹벽에 대한 관심이 높아지고 있다. 이에 따라 모형시험 등 연구도 수행되기 시작했는데 기존 모형시험은 시험조건도 다양하지 않으며, 시험방법 등에서 개선해야 할 점이 있다. 이 연구에서는 개선된 모형시험 방법으로 여러 가지 다양한 조건에 대하여 모형시험을 수행하여 선반식 옹벽의 수평토압 감소효과를 확인하고자 하였다. 모형지반으로는 옹벽모형지반으로 일반적으로 많이 사용되는 주문진 모래를 이용하였으며, 1.2m의 모형옹벽을 15개 층으로 나누어 층마다 2개씩 총 30개의 로드셀을 사용하여 옹벽 높이별 수평토압을 측정하였다. 연구결과 선반식 옹벽은 캔틸레버식 옹벽에 비해 수평토압이 작게 발생하였으며, 선반 길이, 선반위치 등에 따라 수평토압의 크기가 영향을 받는 것으로 나타났다.

• 한국도로학회논문집
• /
• 제15권4호
• /
• pp.75-83
• /
• 2013

PURPOSES: The purpose of study is to understand the characteristic of driving noise from the front and rear tire for effective active noise cancellation application. METHODS : As literature review, noise measurement methods were reviewed. Noise measurement conducted at three kind of section by road slope using CPX(Close Proximity Method). Noise data was compared by total sound pressure level and 1/3 octave band frequency sound pressure level. Also, each section was compared by T-test using SPSS. RESULTS : In the case of the uphill section, it was shown that the sound pressure level of the front tire at Sugwang-Ri and Sinchon-RI sections was higher than that of the rear tire in low and high frequency band. In the case of high slope section of Sangsaek-Ri, the sound pressure level of the front tire was higher than that of the rear tire in high frequency. Also, in the case of the downhill section, it was shown that the sound pressure level of the front tire at Sugwang-Ri and Sinchon-RI sections was higher than that of the rear tire in low frequency band. However, the sound pressure levels of both the front and rear tires were approximately the same in the high slope section of Sangsaek-Ri. The result of T-test showed that total sound pressures of the front and rear tires were not different from each other in the case of high slope and high speed. CONCLUSIONS: Road slope was not an important variable for effective active noise cancellation.

• 한국농공학회지
• /
• 제30권4호
• /
• pp.134-153
• /
• 1988

This paper was carried out to investigate the existence of a unique stress- strain behavior by obtaining some factors influencing the time dependent stress- strain behavior of clay. The results obtained from this study were summarized as follows ; 1. The relationship between stress ratro and strain in normally consolidated clay was in- dependent on pre-shear consolidation pressure. Therefore, shear strain could be expressed as a function with stress ratio. 2. The constitutive equation of shear strain on Modified Carn Clay Model coincided better with the observed value than Cam Clay Model. 3. The relationships between deviator stress and shear strain, between pore water pressure and shear strain were unified by the mean equivalent pressure. 4. The shear strain contour in norrnally consolidated clay was increased linearly through origin, but that in overconsolidated clay was not in accordance with the result of the former. 5. Because the effective stress path of normally consolidated clay was unified by the mean equivalent pressure, state boundary surface in (e,p,q) space was transformed into two dimensional surface. But it was considered to be suitable that the unified stress- strain in overconsolidated clay be expressed by a function with overconsolidation ratio. 6. The deviator for constant strain was increased linearly with increment of strain rate ($\varepsilon$) on semi-log scale, but pore water pressure was decreased. 7. The behavior of stress relaxation was transformed from linear to curvilinear with inc - rement of strain rate before stress relaxation test, and pore water pressure was increased in total range. 8. The strain of creep was increased linearly with increment of time on semi-log scale. The greater the strain rate before creep test became, the greater the increment of strain of creep became. And the pore water pressure during creep test was increased generally with increment of time on semi-log scale.

• 한국추진공학회지
• /
• 제16권6호
• /
• pp.56-61
• /
• 2012

한국형발사체 1단에 사용될 75톤급 액체로켓엔진 연소기의 기술검증시제를 설계, 제작하여 연료 수류시험을 수행하였다. 가압압력을 조절하여 연료 유량을 변경함으로써 주어진 유량에서 발생하는 연소기 재생냉각 채널에서의 압력 손실을 측정하였다. 연소실 각 부에서의 압력 손실을 측정할 수 있었으며, 상당량의 압력 손실이 유속이 강한 연소실 노즐목부에서 발생함을 확인하였다. 주어진 연료 수류시험 조건에서 수력학 해석을 통하여 수력학 해석 방법의 정확도를 검증할 수 있었다.

• 음성과학
• /
• 제1권
• /
• pp.237-259
• /
• 1997

Cleft Palate speech appears to have hyper/hyponasality with velopharyngeal insufficiency and articulation disorders. Previous studies on Cleft Palate speech have shown that speech tends to have lower airflow and air pressure. To examine the aerodynamic characteristics of Cleft Palate speech, Aerophone II Voice function Analyzer was used. We measured sound pressure level, airflow, air pressure and glottal power. Three Cleft Palate adults and five normal adults participated in this experiment. The test words are composed of: (1) the sustained vowel /o/ (2) /CiCi/, where C is one of three different stop consonants in Korean (3) /bimi/. Subjects were asked to produce /bimi/ five times without opening their lips. All the data was statistically tested by t-test for Cleft Palate patients before operation groups and control groups and paired t-test for Cleft Palate patients before and after operation groups. The results were as follow: (1) Cleft Palate patients generally speak with incomplete oral closure and lower oral air pressure. As a result, the SPL of Cleft Palate before operation is 3 dB lower than control groups. (2) Airflow of Cleft Palate in phonation and articulation is lower than that of control groups. However, it increased after operation. Lung volume and mean airflow in phonation are significantly increased (p<0.05). (3) Although velopharyngeal function (velar opening rate) of Cleft Palate is poor in comparison with control groups, it was recovered after operation. In this event maximum flow rate and mean airflow rate are significantly increased (p<0.05). (4) Air pressure of Cleft Palate in speech is lower than that of control groups. In general, the air pressure of Cleft Palate increased after operation. In this event air pressure of glottalized consonant is significantly increased (p<0.04). (5) Glottal Power(mean power, mean efficient and mean resistant) of Cleft Palate patients is lower than that of control groups. But mean efficient and mean resistant of Cleft Palate patients increased significantly (p<0.05) after operation.

• 비파괴검사학회지
• /
• 제36권3호
• /
• pp.231-235
• /
• 2016

원자력발전소에서 격납건물 국부누설률시험(LLRT)에 사용되는 누설률 측정 방법에는 유량보충법과 압력감소법이 있으며, 대부분의 발전소에서는 유량보충법을 우선 적용하고 있다. 유량보충법은 누설되는 양만큼 보충되는 유량을 측정하여 누설률을 계산하는 방식이다. 그러나 과도한 누설이 발생하여 시험압력 유지가 어려울 경우 압력감소법이 보완적으로 사용될 수 있다. 압력감소법은 시험압력보다 낮은 압력을 적용하여 누설률을 측정할 수 있기 때문이다. 본 논문에서는 원자력발전소 격납건물 국부누설률시험에서 압력감소법을 이용한 과다누설 측정 방안을 연구하고자 하였다. 이에 따라 현장에서의 누설시험 조건과 유사하게 실험장치를 구성하여 실증실험을 수행하였다. 실험 결과 압력감소법에서의 누설률 변화 특성을 확인하였으며, 여러조건에서 측정된 누설량을 바탕으로 실제 누설률 계산에 필요한 보상비를 산출하였다.

• 항공우주기술
• /
• 제7권1호
• /
• pp.40-48
• /
• 2008

공기 혼합시스템은 초음속 지상추진시험설비의 축열식 가열기로부터 공급되는 $1000^{\circ}C$, 3.5MPa의 공기와 고압공기 공급원으로부터 공급되는 상온, 동일 압력의 공기를 혼합시켜서 시험부로 공급하기 위한 설비로 32MPa로 압축되어 있는 고압공기 공급원을 3.5MPa로 감압하는 고압/저온 유동제어부, 축열식 가열기의 고온밸브에서부터 공기 혼합기로 고온의 공기를 공급하기 위한 고온 배관, 축열식 가열기로부터 공급되는 고온 유동과 고압공기 공급원으로부터 공급되는 상온 유동을 혼합하기 위한 공기 혼합기로 구성된다. 공기 혼합 시스템을 통하여 완전히 혼합된 공기의 유량은 25kg/s, 온도는 약 $400^{\circ}C$로 이를 통하여 초음속 지상추진시험설비의 구동 영역을 저 마하수, 저 고도 영역까지 확장할 수 있다.