• 한국정밀공학회지
• /
• 제19권1호
• /
• pp.212-218
• /
• 2002

This research is the development of a distributed tactile sensor using PVDF film far the detection of the contact state. The prototype of the tactile sensor with 8$\times$8 taxels was fabricated using PVDF film and flexible circuitry. In the fabrication procedure, the electrode and the common electrode patterns are attached to the both side of the 28${\mu}m$ thickness PVDF film. The sensor is covered with polyester film for insulation. The signals of a contact pressure to the tactile sensor are sensed and processed in the DSP system in which the signals are digitalized and filtered. And the signals are integrated for taking the force profile. The processed signals of the output of the sensor are visualized to take the shape and force distribution of the contact object in personal computer. The usefulness of the sensor system is verified through the sensing examples.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.108-108
• /
• 2010

We have generated Ne-Xe plasma in dense plasma focus device with hypocycloidal pinch for extreme ultraviolet (EUV) lithography and investigated an electron temperature. We have applied an input voltage 4.5 kV to the capacitor bank of 1.53 uF and the diode chamber has been filled with Ne-Xe(30%) gas in accordance with pressure. If we assumed that the focused plasma regions satisfy the local thermodynamic equilibrium (LTE) conditions, the electron temperature of the hypocycloidal pinch plasma focus could be obtained by the optical emission spectroscopy (OES). The electron temperature has been measured by Boltzmann plot. The light intensity is proportion to the Bolzman factor. We have been measured the electron temperature by observation of relative Ne-Xe intensity. The EUV emission signal whose wavelength is about 6~16 nm has been detected by using a photo-detector (AXUV-100 Zr/C, IRD) and the line intensity has been detected by using a HR4000CG Composite-grating Spectrometer.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.189-195
• /
• 2003

This paper represents an identification procedure for leading mechanism of a car A/V system which is composed of a DC motor and a set of plastic gears. In addition, we studied dominant noise source of rattle noise generated by external forced vibration as a car drives. we made a dynamometer to produce stationary operation on loading mechanism of A/V system because noise generated by actual loading mechanism is non-stationary signal. operating the dynamometer setup at various motor speeds, sound pressure spectra are measured and the results are analyzed. its dominant noise source is also identified by using a sound Intensity technique. we made use of multi-dimensional spectral analysis to rind a dominant rattle noise. this method is so useful to eliminate coherence between vibration sources and helps us obtain coherent output spectrum of individual vibration source which make a rattle noise.

• 대한기계학회논문집
• /
• 제16권9호
• /
• pp.1654-1668
• /
• 1992

본 연구에서는 경험적으로 측정점 사이의 간격과 구경의 크기를 정하는 방법 에 대하여 살펴보았다.이에 반하여 둘러싸기 오차(wraparound error)는 이산화된 파수 성분 데이타의 처리 과정에서 발생하게 되는데, 이를 줄이기 위한 방법의 일환으 로 본 논문에서는 제로패딩(zero padding)방법을 도입하였다. 또한 둘러싸기 오차 (wraparound error)의 크기를 정량화하여 신뢰할 수 있는 예측결과의 범위를 살펴보았 다.

• 대한미생물학회지
• /
• 제35권2호
• /
• pp.141-147
• /
• 2000

We purified enolase from Candida albicans KNIH10 strain which was isolated from a clinical specimen in Korea. The purified enolase was used to detect anti-Candida antibodies in sera of patients with invasive candidiasis. For purification of enolase from the crude extract prepared by French pressure at 20,000 PSI, the fast performance liquid chromatography (FPLC) using DEAE-sepharose column was used. The elutes at $0.3{\sim}0.4\;M$ NaCl in FPLC was purified with homogenity in SDS-PAGE and its enzymatic activity was confirmed in sera of invasive candidiasis with candidemia patient by immunoblotting. The purified enolase indicated no signal (100% specificity) in 40 normal human sera and 75% (6/8) sensitivity in sera of candidemic patients with suspicious invasive candidiasis by immunoblotting.

• 한국광학회지
• /
• 제9권4호
• /
• pp.240-244
• /
• 1998

공동 광자 감쇠 분광법(cavity ring down spectroscopy, CRDS)은 미량기체의 절대밀도를 측정할 수 있는 고감도 레이저 분광기술이다. 연속발진 레이저(continuous wave laser)를 사용한 새로운 방법의 CRDS 분광기를 구현하였다. 이 장치에서는 PZT(piezoelectric transducer)를 움직여 공동의 길이를 비공명(off-resonance)상태로 빠르게 변화시킴으로써 입사되는 연속발진 레이저 빔을 차단하여 감쇠신호를 발생시킨다. 이 방법으로 570 nm 근처에서 압력이 2700 Pa인 아세틸렌(C2H2)의 overtone 천이에 대한 흡수 분광선을 측정하였으며, 이때 측정할 수 있는 최소 흡수계수는 3$\times$10-9 cm-1정도이다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 1998년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.70-75
• /
• 1998

The comparison of Topex/Poseidon sea surface heights and Tide Gauge sea levels was studied in the South Indian Ocean after Topex/Poseidon mission of about 3 years (11- 121 cycles) from January 1993 through December 1995. The user's handbook (AVISO) for sea surface height data process was used in this study Topex/Poseidon sea suface heights ($\zeta$$^{T/P}$), satellite data at the point which is very closed to Tide Gauge station, were chosen in the same latitude of Tide Gauge station. These data were re-sampled by a linear interpolation with the interval of about 10 days, and were filtered by the gaussian filter with a 60 day-window. Tide Gauge sea levels ($\zeta$$^{Argos}$, $\zeta$$^{In-situ}$ and $\zeta$$^{Model}$), were also treated with the same method as satellite data. The main conclusions obtained from the root-mean-square and correlation coefficient were as follows: 1) to Produce Tide Gauge sea levels from bottom pressure, in-situ data of METEO-FRANCE showed very good values against to the model data of ECMWF and 2) to compare Topex/Poseidon sea surface heights of Tide Gauge sea levels, the results of the open sea areas were better than those of the coast and island areas.

• Tribology and Lubricants
• /
• 제29권3호
• /
• pp.180-185
• /
• 2013

The purpose of this study was to analyze the tribological characteristics of the Electronic control suspension System in a car. In the first example, the cilp used to attach the front electronic control suspension(ECS) system's control actuator was fastened very tightly. Thus, the wire was cut because of continual rotation of the shock-up shover piston rod used to adjust the height of the car. This verified the disconnection phenomenon where wire damaged makes it impossible for the ECS system to send signal to the actuator. The second example, involved a minute hole that allowed gas to leak from the ECS system. As a result, the height of the car verified the down phenomenon. In the third example, the resistance of a wire measured at $0.21{\Omega}$, when the G sensor was disconnected from the system. This verified the system shutdown and lighting of the ECS warning lamp because of body interference caused by a slight pressure on the battery cover. Therefore, quality control is always necessary to ensure safety and durability of a car.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.168-168
• /
• 2011

사중극 질량분석기(Quadrupole Mass Spectrometer, QMS)에서 사용하여 이온소스의 신뢰성을 평가하는 방법으로 약 50 ppm으로 $H_2$ 가스를 Ar 가스에 희석한 혼합기체를 주입하여 MDPP(Minimum Detectable Partial Pressure)를 측정하는 기술을 연구하였다. 수소 이온의 전류와 배경 노이즈의 비율(Signal/Noise)을 극대화하기 위하여 QMS를 튜닝하였고, 튜닝을 여러 번 반복한 결과 약 1 order 이내에서 repeatability를 얻을 수 있었다. 이 MDPP 평가방법을 이용하여 상용 이온소스와 한국표준과학연구원에서 기존 이온소스를 개선한 두 가지 다른 타입의 이온소스를 평가 비교하였고, 이 평가는 진공 챔버를 $2{\times}10^{-9}$ Torr로 배기한 뒤, 혼합된 희석기체를 주입하여 ~$10^{-7}$ Torr를 유지한 상태에서 QMS 200의 신호를 증폭시키기 위해 SEM (Secondary Electron Multiplier)을 사용하여 진행되었다. 사용한 혼합 희석기체는 한국표준과학연구원의 가스표준실에서 제조하였으며, 혼합비의 불확도는 수 ppm이다. 이 희석된 혼합가스를 사용하여 MDPP 값을 비교 분석하여 이온소스의 신뢰성 평가 연구를 하였다.

• 한국항공우주학회지
• /
• 제33권2호
• /
• pp.39-45
• /
• 2005

본 연구에서는 현재 일반 프로펠러 항공기에 사용 중인 둥근 팁 형상을 갖는 Hartzell 사 제작 프로펠러에 대해서 두께소음과 하중소음에 대한 예측을 시도하였다. 음향장 해석에 앞서서 프로펠러 표면상에 존재하는 압력분포는 자유후류 패널 방법과 비정상 베르누이 방정식을 이용하여 구하였다. 음향장 해석을 위해서는 FW-H의 음향상사 법칙을 적용하였다. 주어진 프로펠러 형상과 운전 조건에 대한 소음 예측으로부터 두께소음은 프로펠러 회전면을 기준으로 전방과 후방이 서로 비슷한 면대칭 분포를 갖는 반면에, 하중소음은 프로펠러 후방의 소음이 전방에 비해서 더 크게 나오는 결과를 보여주었다. 일반적인 운전조건에서는 전반적으로 하중소음이 두께소음보다 지배적인 결과를 보여주었다.