• 대한기계학회논문집A
• /
• 제38권2호
• /
• pp.185-192
• /
• 2014

유성기어의 설계는 모듈 등의 이산변수, 잇수 등의 정수 변수, 치폭, 종횡비 등의 연속 변수가 혼재된 복잡한 문제로 이를 해결하기 위해서는 최적 설계 기법이 적용되어야 한다. 본 연구에서는 유전 알고리즘(Genetic algorithm)을 이용한 최적 설계를 유성기어 설계에 적용하였다. 유성기어 설계시 기본이 되는 기어 잇수, 모듈, 압력각, 치폭 등과 같은 매크로 지오메트리(Macro-geometry)를 이용하여 이뿌리/치면 강도에 대한 강도 평가를 수행하였으며, 상용 프로그램과의 비교를 통해 검증하였다. 유전 알고리즘을 이용하여 기어의 체적을 최소화하기 위한 최적 설계를 수행하였으며, 이를 통하여 설계자는 초기 설계시 시행착오를 줄여 설계 시간을 단축시킬 수 있었다.

• 대한기계학회논문집A
• /
• 제33권8호
• /
• pp.826-831
• /
• 2009

The piping systems in nuclear power plant are composed of various typed pipes such as straight, elbow pipe, branch and reducer etc. The elbow is connected from straight pipe to another pipes in order to establish the complicated piping system. Elbow is one of very important components considering management of wall thinning degradation. It is however applied by various loads such as system pressure, earthquake, postulated break loading and many transient loads, which provoke simply the internal pressure, bending and torsional stress. In this study, firstly pipes in the secondary system of the nuclear power plant are classified as pipe size and type for selecting the investigating range. Next, a large number of finite element analysis considering the all typed dimensions of commercial pipe has been performed to find out the behavior of TES(twice elastic slop) plastic load of elbows, which is based on evaluation of the structural safety factor. Finally performance based structural safety factor was investigated comparing with maximum allowable load by construction code.

• Nuclear Engineering and Technology
• /
• 제42권1호
• /
• pp.73-78
• /
• 2010

The suppression of molten salt vaporization is one of the key technical issues in the electrolytic reduction process developed for recycling spent nuclear fuel from light-water reactors Since the Hertz-Langmuir relation previously applied to molten salt vaporization is valid only for vaporization into a vacuum, a diffusion model was derived to quantitatively assess the vaporization of LiCl, $Li_2O$ and Li from an electrolytic reducer operating under atmospheric pressure. Vaporization rates as a function of operation variables were calculated and shown to be in reasonable agreement with the experimental data obtained from thermogravimetry.

• 설비공학논문집
• /
• 제21권4호
• /
• pp.260-265
• /
• 2009

The aim of this study is to remove crack on a ventilation device at the suction part of zinc plating factory, and the main point is making optimum configuration by improving an existing hood system. The result shows that existing hood system has problem with duct configuration, angle and reducer. Model-5 shows lowest pressure difference as meaning of suction capability. The hood inlet surface has most uniform suction capability.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 제17회 워크샵 및 추계학술대회
• /
• pp.693-697
• /
• 2005

This study was performed to develop accelerated life test method of the wind-turbine gearbox using accumulated damage theory that used to model the fatigue of parts that receive variable load. The accumulated damage theory was introduced, and the estimation of life and calculation of accelerated life test time was illustrated. As the actual application example, accelerated life test method of the gearbox was described. Life distribution of the wind-turbine gearbox was supposed to follow Weibull distribution and life test time was calculated under the conditions of average life (MTBF) 140,600 hours and 99% reliability for one test sample According to the accumulated damage theory, because test time can shorten in case increase test load, test time could be reduced by 1.2 years when we put the load 1.2 times of rated load than 0.93 times of rated load that is equivalent load calculated by load spectrum of the wind turbine. This time, acceleration coefficient was 21.3. This accelerated test method was used to develop accelerated test method of gear reducer, gear and bearing as well as the industrial gearbox and it is considered to be applied comprehensively to mechanical parts the fatigue of which is happened by load or pressure etc.

• 연구논문집
• /
• 통권32호
• /
• pp.35-43
• /
• 2002

This study was performed to develop accelerated life test method of machanical parts using cumulative damage theory that used to model the fatigue of parts that receive variable load. The cumulative damage theory was introduced, and the estimation of life and calculation of accelerated life test time was illustrated. As the actual application example, accelerated life test method of agricultural tractor transmission was described. Life distribution of agricultural tractor transmission was supposed to follow Weibull distribution and life test time was calculated under the conditions of average life (MTBF) 3,000 hours and 90% reliability for one test sample. According to the cumulative damage theory, because test time can shorten in case increase test load, test time could be reduced by 482 hours when we put the load 1.1 times of rated load than 0.73 times of rated load that is equivalent load calculated by load spectrum of the agricultural tractor. This time, acceleration coefficient was 11.7. This accelerated test method was used to develop accelerated test method of gear reducer, hydraulic hose and bearing as well as agricultural tractor transmission and it is considered to be applied comprehensively to machanical parts the fatigue of which is happened by load or pressure etc.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 춘계학술발표대회
• /
• pp.58.2-58.2
• /
• 2009

금속 와이어를 전기폭발법에 의해 증기 상태로 만든 후 응축시킬 때 제조되는 금속나노분말의 크기특성을 파악하기 위하여 제조장치에 샘플링 포트를 삽입하여 실시간 입자 측정기(Scanning Mobility Particle Sizer; SMPS) 로 14~615 nm 범위의 크기분포를 측정하였다. SMPS는 입자의 크기에 따라 전기적 이동도가 달라지는 원리를 이용하여 공기 중에 부유된 나노입자의 크기분포를 수 분내에 측정하는 실시간 입자 측정기이다. 금속나노분말 제조장치 내부는 약 0.5 bar 수준으로 불활성가스로 채워져 있어서 대기압보다 높은 고압조건이므로 SMPS 전단에 작은 노즐이 삽입된 pressure reducer를 부착하여 적정한 압력 수준으로 낮춘 후 SMPS로 나노분말의 크기분포를 실시간으로 측정하였다. 제조공정이 진행되면서 전기폭발이 주기적으로 발생하는 동안에 SMPS로 측정한 14~615 nm 범위 입자의 총 수농도는 약 $10^7$ 개/$cm^3$ 수준으로 매우 높았고, 약 100 nm와 200 nm에서 고농도 피크를 나타내는 bimodal 분포를 나타냈다. 반면 전기폭발이 잠시 중단되는 경우 입자의 총 수 농도는 약 $10^4$ 개/$cm^3$ 수준으로 낮아지고, 약 20 nm 이하의 입자가 대부분을 차지하면서 입자의 크기가 커질수록 농도가 낮아지는 형태의 크기분포로 바뀌었다. 본 연구를 통해 얻어진 제조장치 내부의 나노분말 크기분포 자료는 고품질 제품을 생산하기 위해 나노분말의 크기분포를 제어하는 분급장치 개발에 활용될 수 있을 것으로 기대된다.

• 한국자기학회지
• /
• 제4권4호
• /
• pp.326-334
• /
• 1994

친수성-고점도 자성유체를 Nd-영구자석과 병용하여 기름밀봉 장치로의 개발을 목표로 실험 검토하였다. etylene glycol 액상중에 $Fe_{3}O_{4}$를 분산시킨 자성유체는 매질의 비등점이 다른 액상보다 높고 점성이 높아서 기름밀봉 성능을 향상시킬 수 있을 뿐만 아니라 본 장치의 부품중 대부분 을 이루고 있는 철강재를 부식시키지 않았다. 본 자성유체중 $Fe_{3}O_{4}$ 농도가 증가할수록 점도 와 자성율이 증가하여 기름밀봉 성능을 향상시킬 수 있었다. 본 장치는 대기압하에서 기름밀봉 성능이 매우 우수하였다.

• 한국안전학회지
• /
• 제21권4호
• /
• pp.60-65
• /
• 2006

It is a well known fact that LCD is a central part of the IT industry which is important in the present and the future. But the biggest problem of LCD manufacturing is maintaining a cleaning room environment and administration. Therefore the purpose of this study is to first, prevent the yield depreciation and damage of products, and second, protect the worker ftom accidental electrostatic discharge during LCD manufacture. The soft x-ray ionizer is a type of electrostatic reducer device. It protects against electrostatic discharge in the cleaning room environment and is a necessary environmental factor during LCD production. The positive aspects of the soft x-ray are its shorter time and wider angle of exposure. But the negative aspect of the soft x-ray is its need for several shielding of protection from the harmful x-ray exposure. On this study, the development of the Air Nozzle-type ionizer to amend and refine some problems. For example, examined the electrostatic reduce device of a soft x-ray type and discovered the ion did not go inside well. also workers to be free from danger. An Air Nozzle-type ionizer is comprised of soft x-ray radiation and ionized air production. Air is injected through the nozzle after being ionized from radiation. It supplies air keeping the same pressure into the end foundation of ion production. The soft x-ray is the structure which radiates ionized air through the nozzle (21 holes) having micro holes of the ionizable radiation after ionizing the inside air by the ion production. A worker does not need a cover to protect against x-rays and the Air Nozzle-type ionizer is easy to set up and is more effective at eliminating electrostatic.

• 대한기계학회논문집A
• /
• 제41권8호
• /
• pp.771-782
• /
• 2017

본 논문은 노약자들의 발목근력보조를 위한 착용형 로봇에 대해서 서술하였다. 기존 착용형 로봇들은 보행 시 필요한 근력을 보조하기 위해 대부분 모터와 감속기를 사용하였다. 하지만 모터와 감속기의 조합은 무게가 무거울 뿐만 아니라 감속기 치차의 마찰때문에 실제 사람의 근육과 달리 강성과 토크를 동시에 제어하기 어려운 한계가 있다. 따라서 본 연구에서는 모터/감속기 조합보다 가볍고 안전하며 근력을 보조하는 힘을 충분히 발휘할 수 있는 Mckibben 공압 근육을 사용하였다. 발목의 피칭 모션에 이용되는 종아리 가자미근 및 앞정강근의 힘을 한 쌍의 공압 근육을 사용한 상극구동으로 보조하였으며, 상극구동제어를 위해 상극구동 모델 파라미터들을 실험적으로 도출하였다. 사용자의 보행의지를 판단하고자 발바닥에 부착된 압력변위센서로 압력과 압력중심위치를 측정하여 발바닥의 하중과 발목토크를 계산하였고, 이를 기반으로 공압 근육 관절의 강성과 토크를 동시에 제어하였다. 최종적으로, 트레드밀에서 근전도 신호를 측정하여 발목근력보조로봇의 성능을 실험적으로 입증하였다.