• 제목/요약/키워드: Pressure Interference

검색결과 235건 처리시간 0.031초

교정치료후 안정성에 미치는 교합의 영향 (THE EFFECTS OF OCCLUSION ON THE STABILITY AFTER ORTHODONTIC TREATMENT)

  • 황현식
    • 대한치과교정학회지
    • /
    • 제19권2호
    • /
    • pp.109-120
    • /
    • 1989
  • We tend to consider only static occlusion such as molar relationship, canine key, and interdigitation at finishing stage. Of course, this static occlusion is important for post-orthodontic stability. But we should remember that mandible is always on the move during its various functions. If no pressure or too much pressure is put on during its functions, untoward tooth movement could occur. And tooth mobility, periodontitis, wear facet, bruxism, and far worse temporomandibular disorder could occur. After many studies have been done on what is a desirable occlusal scheme to strengthen post-orthodontic stability, today, "mutually protective occlusion" is recommended. If an orthodontist does not have understanding about this occlusal scheme during orthodontic treatment, the following conditions will be resulted after orthodontic treatment. I. Centric discrepancy 1. centric prematurity 2. sunday bite 3. molar fulcrum II. Eccentric discrepancy 1. posterior interference 2. anterior interference If we have deep understanding about these discrepancies that can happen after orthodontic treatment and their causes, corrections, and especially preventions against them, post-orthodontic stability could be strengthened and further temporomandibular disorder could be prevented.

  • PDF

아파트 건축물 군(群)에 의한 건축물 외장재의 풍압분포 (Distribution of Wind Pressure on Claddings of Apartment Buildings Affected by Neighboring Buildings)

  • 조강표;홍성일;김원술
    • 한국공간구조학회논문집
    • /
    • 제6권1호
    • /
    • pp.91-99
    • /
    • 2006
  • 이 논문은 풍동실험 결과를 토대로 고층아파트 건축물의 풍압분포에 대한 내용을 다루고 있다. 태풍에 의해 창유리 파손을 입은 아파트 단지의 풍압모형을 제작하여 각 건축물의 상호간섭효과를 조사하였다. 풍동실험은 풍압모형을 이용하여 대형경계 층풍동에서 수행하였다. 간섭하는 주변건물의 여부에 따른 실험결과를 비교하고 검토하였다. 주변건물이 없어서 바람을 직접 맞을 때에는 105동, 106동은 주로 정압이 작용하였지만, 주변건물이 둘러싸고 있을 때의 105동, 106동은 큰 부압이 작용하는 것을 관찰할 수 있었다. 따라서 고층아파트 외장재 설계시 외장재의 안전성 확보를 위해서는 풍동실험을 수행하여 바람에 의해 야기되는 상호간섭효과를 고려하는 것이 가장 적합한 방법이라 할 수 있다.

  • PDF

건축물군의 바람길변화로 인한 풍하중 상호간섭 및 풍환경 (Interference Effects of Change in Wind Passage of a Building Group on Wind Loads and Wind Environments)

  • 조강표;홍성일;김무환;이옥진
    • 한국전산구조공학회:학술대회논문집
    • /
    • 한국전산구조공학회 2008년도 정기 학술대회
    • /
    • pp.402-409
    • /
    • 2008
  • Wind loads and environments in realistic situations surrounded by neighboring buildings may be considerably different from those in idealized or simplified situations such as codes and standards. Interference effects of change in wind passage of a building group on wind loads and wind environments are reviewed. Wind-induced interference effects depend mainly on the building geometry and arrangement of these structures, their orientation and upstream terrain conditions. The most important factor among them may be the arrangement of building structures which can change the wind direction directly. Interference effects regarding wind loads are discussed with examples of window damages by typhoon and of pressure measurements in the boundary layer wind tunnel. Wind environment problems are also discussed, specially underlined on pedestrian comfort and safety. Various evaluation techniques or standards of wind environment are introduced. The change of wind velocity between the panel-type apartment buildings is examined, depending on the distance each other.

  • PDF

공구자세의 연속제어를 통한 선박용 프로펠러의 5축 가공 표면조도의 개선 (The Improvement of Surface Roughness of Marine Propeller by Continuous Control of Cutter Posture in 5-Axis Machining)

  • 손황진;임은성;정윤교
    • 한국기계가공학회지
    • /
    • 제11권2호
    • /
    • pp.27-33
    • /
    • 2012
  • A marine propeller is designed for preventing cavitation priority. Cavitation is a phenomenon which is defined as the vibration or noise by dropping the pressure on the high-speed rotation of the propeller. There has to be a enough thrust on the low-speed rotation for preventing cavitation. Thus, it has to be considered in the increasing of the number of blade and the angle of wing to design the propeller. In addition, flow resistance will be increasing by narrowing the width between blades. So high quality surface roughness of the hub to minimize flow resistance is required. Interference problems with tool and neighboring surfaces often take place from this kind of characteristics of the propeller. During 5-Axis machining of these propellers, the excessive local interference avoidance, necessary to avoid interference, leads to inconsistency of cutter posture, low quality of machined surface. Therefore, in order to increase the surface quality, it is necessary to minimize the cutter posture changes and create a continuous tool path while avoiding interference. This study, by using a MC-space algorithm for interference avoidance and a MB-spline algorithm for continuous control, is intended to create a 5-Axis machining tool path with excellent surface quality. Also, an effectiveness is confirmed through a verification manufacturing.

선박 추진축계 선미관 베어링의 강제 압입 피팅 방식에 관한 연구 (A Study on the Forced Fitting Method of Stern Tube Bearing for Propulsion Shafting in Ships)

  • 조권회;이재현;김양곤
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제34권5호
    • /
    • pp.653-660
    • /
    • 2010
  • 선미관 베어링은 프로펠러가 회전할 시 슬립을 방지하기 위하여 충분한 간섭량을 가지고 캐스팅에 강제 압입되어야 한다. 선미관 베어링을 캐스팅에 강제 압입 시에 필요한 힘을 계산할 때 사용되어지는 공식은 업체별로 각각 다르며, 계산 시 사용되어지는 요소들의 값도 상이하다. 이에 따라 조선소에서 선미관 베어링 강제 압입력을 계산할 때에는 업체별로 제시된 공식과 재질에 따라 고려되어지는 요소들의 값을 사용하지만 간섭량은 조선소의 경험에 기반한 값을 표준으로 사용하고 있다. 본 논문은 강제 압입법에 의한 시공시에 선미관 베어링에 사용되어지는 피팅관계식을 검토하여 선미관 베어링 업체별로 제시되어지는 값을 기반으로 한 결과를 실제 값과 비교하였다. 그 결과 업체별로 제시한 식이 두께가 두꺼운 실린더 이론을 이용하였음을 알 수 있었다. 특히 J사 및 B사의 경우에는 K사와는 달리 두께가 두꺼운 실린더 이론을 근간으로 하였지만, 두께가 얇은 실린더의 경우에도 사용할 수 있도록 변형하여 사용하고 있음을 알 수 있었다.

TPMS 양방향 통신을 위한 유효 데이터 판정기법 (Assessment Method of Effective Data for Duplex TPMS Communications)

  • 김성민;황석승
    • 한국전자통신학회논문지
    • /
    • 제7권3호
    • /
    • pp.499-505
    • /
    • 2012
  • TPMS(Tire Pressure Monitoring System)는 차량에서 사용되는 무선통신기기의 일종으로 운전자가 타이어의 상태를 보다 효율적으로 파악하고 관리하기위한 안전보조 시스템으로 정의할 수 있다. TPMS는 무선통신을 사용하므로 데이터 송/수신 시 각종 잡음이나 간섭에 의한 통신장애가 발생하게 된다. 운전자의 안전과 직결되는 타이어 사고를 사전에 예방하고 무선통신으로 인한 데이터 전송 시 보다 정확한 데이터 신뢰성 확보를 위해 본 논문에서는 신호처리수신부에서 수신신호의 SINR(signal-to-interference and noise ratio, 신호 대 간섭 및 잡음 비)을 측정하여 데이터 신뢰도를 판정하는 신뢰도 판정기법을 제안한다. 또한, 이를 수행하기 위한 효과적인 데이터 신뢰성 판정 알고리즘 구조를 제안한다. 본 논문에서 제안된 데이터 신뢰성 판정기법은 TPMS 뿐만 아니라 센서를 이용한 양방향통신 시스템에서 폭넓게 사용될 수 있을 것으로 판단되다. 컴퓨터 시뮬레이션을 통해 95%, 97%, 99%의 데이터 신뢰도를 만족하는 임계 SINR 값을 확인한다.

순차이송방식 GMP 공정에서 공정변수가 유리렌즈 성형성에 미치는 영향 (Effect of the Molding Conditions on Formability in Progressive Glass Molding Press)

  • 정태성;박규섭;김동식
    • 소성∙가공
    • /
    • 제18권8호
    • /
    • pp.633-639
    • /
    • 2009
  • Remarkable progress had been made in both technology and production of optical elements including aspheric lens. In the past, precision optical glass lenses were produced through multiple processes such as grinding and polishing, but mass production of aspheric lenses requiring high accuracy and having complex profile was rather difficult. Against such a background, the high-precision optical GMP process was developed with an eye on mass production of precision optical glass pasts by molding press. This GMP process can produce with precision and good repeatability special form lenses such as for cameras, video cameras, aspheric lenses for optical items. In this study, Design Of Experiment(Taguchi method) was adopted to find a tendency of molding conditions that influence formability. Three main factors for molding conditions were selected based on pressure at pressing stage and temperature, pressure at cooling stage. Also, the DOE was carried out and the interference patterns were measured to evaluate the formability of GMP process. From the results, it was found that the cooling pressure is the most sensitive parameter for progressive GMP process.

다공확장벽을 이용한 플룸간섭의 제어 (Control of Plume Interference Using a Porous Extension)

  • Young-Ki Lee;Heuy-Dong Kim
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2003년도 제21회 추계학술대회 논문집
    • /
    • pp.95-98
    • /
    • 2003
  • The physics of the plume-induced shock and separation particulary at a high plume to exit pressure ratio and supersonic speeds up to Mach 3.0 with aid without a passive control method, porous extension, were studied using computational techniques. Mass-averaged Navier-Stokes equations with the RNG k-$\varepsilon$ turbulence model were solved using a fully implicit finite volume scheme and a 4-stage Runge-Kutta method. The courol methodology for plume-afterbody interactions is to use a perforated wall attached at either the nozzle exit or the edge of the missile base. The Effect of porous wall length on plume interference is also investigated. The computational results show the main effect of the porous extension on plume-afterbody interactions is to in the plume from strongly underexpanding during a change in flight conditions. With control, a change in porous extension length has no significant effect on plume interference.

  • PDF

4 극 발전기 로터의 고정 링 열박음 해석 (Analysis of Shrink-Fitted Retaining Ring on Rotor Body in 4-Pole Generator)

  • 이후광;황석환;최재승
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2001년도 춘계학술대회논문집A
    • /
    • pp.848-853
    • /
    • 2001
  • A study about the shrink fits of rotor and retaining ring in generator was performed for the cases of three radial interference. The shrink-fitted retaining ring used to restrain the end turns of the winded coils in the rotor against centrifugal force requires very careful attention during design and manufacture because it has traditionally been the highest-stressed component of the generator. The contact pressures and residual stresses were obtained by the finite element analysis for each radial interference at zero, 100% rated, and 120% rated speeds, respectively. The results of analysis show that the radial interference in use needs to be increased carefully.

  • PDF

비선형 광신호의 간섭현상 연구 (Study on the Interference Phenomena of Nonlinear Optical Signals)

  • 이은성;한재원;박승남;이충희
    • 한국광학회지
    • /
    • 제3권4호
    • /
    • pp.239-243
    • /
    • 1992
  • KDP 결정에서 2차 고조파가 발생될 때와 질소기체에서 CARS신호가 발생될 때 나타나는 간섭현상을 조사하였다. 비선형 신호들의 위상차이를 주기 위하여 광학유리를 이용하여 제작된 위상변이장치와 고압기체셀을 사용하였으며 각 매질에 대한 가간섭길이를 측정하였다. 특정한 스톡스광의 파장에서 CARS신호가 상쇄간섭을 일으키도록 위상변이장치의 두께를 조정한 후, 넓은 파장영역에서 상쇄간섭된 질소 CARS 스펙트럼을 얻었다. 위상변이장치의 두께를 바꾸면서 상쇄간섭정도의 변화를 관찰하였다.

  • PDF