• Journal of Forest and Environmental Science
• /
• v.3 no.1
• /
• pp.1-9
• /
• 1983

The purpose of this study was to elucidate the ecophysiological habitat of natural Sorbus commixta forest at Mt. Seorak. The results obtained were as follows: 1. The Sorbus commixta trees mainly distributed from 900m to 1,500m altitude. In there, the warm index(WI) was about 42$3.2{\times}10^3$ to $9.2{\times}10^3$, cation exchange capacity(CEC) was 13.7 to 19.5mg/100g, N content 0.21 to 0.39%, $P_2O_5$ content was 22.6 to 38.7ppm, and pH value was 5.6 to 5.8 respectively. 4. The upper crown trees in Sorbus commixta communities were Abies nephrolepis, Taxus cuspidata, Betula platyphylla var. japonica, Quercus${\times}$grosseserrata, Acer mono, Prunus sargentii, Carpinus cordata, Tilia amurensis, and the under crown trees were Rhododendron brachycarpum, Acer pseudo-sieboldianum, Thuja olientalis, Corylus heterohpylla, Philadelphus schrenckii, Rhododendron schlippenbachii, Rhododendron mucronulatum, and Magnolia sieboldii. 5. The stand densities were 1,156 trees/ha at 1,160m and 3,600 trees/ha at 1,300m respectively. The coverages by the DBH basal area were 0.37 at 1,160m and 0.31 at 1,300m respectively, and the vegetation coverages by the crown projection area were 2.04 at 1,160m and 1.61 at 1,300m respectively. 6. The light extinction coefficient(k) in Beer-Lambert's law, showed the distance, F(z), from top canopy to aboveground, was 0.17. 7. The water relations parameters of Sorbus commixta shoot were obtained by the pressure chamber technique. The osmotic pressure, ${\pi}_o$, at maximum turgor was -16.2 bar, and VAT pressure was 14.5bar. The osmotic pressure, ${\pi}_p$, at incipient plasmolysis was -19.4bar. The relative water contents at incipient plasmolysis were 83.1% ($v_p/v_o$) and 87.1%($v_p/w_s$;$w_s$, total water at maximum turgor). 8. The bulk modulus of elasticity(E) of shoot was about 69.6. The total symplasmic water to total water in shoot was 67.7%, and the apoplastic water to total water was 32.3%.

• Korean Journal of Poultry Science
• /
• v.14 no.2
• /
• pp.103-108
• /
• 1987

This study was conducted to bioassay of amino acid availability of feather meal processed by a different methods, commercial feather meal and raw feather meal, The feather meals were processed by labolatory pressure cooker(autoclave) at 2kg/$\textrm{cm}^2$ for 30 minutes ; 3kg/$\textrm{cm}^2$ for 90 minutes : 4kg/$\textrm{cm}^2$ for 120 minutes. Chick employed in the present experiment were Abor Acre strain, male or meat type (body weight, 100-140g), fed with semipurified diet and protein free diet was given during the determination of the metabolic and endogeneous amino acid. The contents of amino acid of samples were investigated by ion-exchange chromatography. The results were as follows; 1. The amino acid availability of raw, 2kg/$\textrm{cm}^2$ for 30 minutes, commercial, 4kg/$\textrm{cm}^2$ for 120 minutes and 3kg/$\textrm{cm}^2$ for 90 minutes of feather meal were -3.09, 63.28, 67.47, 71.22 and 73.75% respectively. 2. The essential amino acid availability of raw, 2kg/$\textrm{cm}^2$ for 30 minutes, commercial, 4kg/$\textrm{cm}^2$ for 120 minutes and 3kg/$\textrm{cm}^2$ for 90 minutes of feather meal were 2.55, 66.78, 66.89, 72,56 and 73.62%, respectively. 3. In individual amino acid of the different processing loather meal and commercial feather meal, biovailabilities were increased methionine, phenylalanine, leucine, arginine, threonine, isoleucine, however, histidine, lysine and aspartic acid were remarkely decreased. In conclusion, the bioavailability or amino acid for the feather meal processed at 3kg/$\textrm{cm}^2$ for 90 minutes was superior to those of other treatment or raw feather meal.

• The Journal of the Korean Society for Microbiology
• /
• v.21 no.1
• /
• pp.151-161
• /
• 1986

In order to develop sensitive and sepcific assay methods for E. coli heat labile enterotoxin(LT) hybridoma cell lines secreting LT specific monoclonal antibody were obtained. LT was purified from cell lysate of E. coli O15H11. The steps included disruption of bacteria by French pressure, DEAE Sephacel ion exchange chromatography, Sephadex G200 gel filtration, and second DEAE Sephacel ion exchange chromatography, successively. Spleen cells from Balb/c mice immunized with the purified LT and $HGPRT^{(-)}$ plasmacytomas, $P3{\times}63Ag8.V653$ were mixed and fused by 50% (w/v) PEG. Hybrid cells were grown in 308 wells out of 360 wells, and 13 wells out of them secreted antibodies reacting to LT. Among these hybridoma cell 1G8-1D1 cell line was selected since it had produced high-titered monoclonal antibody continuously. By using culture supernatant and ascites from 1G8-1D1 cells the monoclonal antibody was characterized, and an assay system for detecting enterotoxigenic E. coli was established by double sandwich enzyme-linked immunosorbent assay (ELISA). The following results were obtained. 1. Antibody titers of culture supernatant and ascites from 1G8-1D1 hybridoma cells were 512, and 102, 400, respectively by GM1-ELISA and its immunoglobulin class was IgM. 2. The maximum absorption ratio of 1G8-1D1 cell culture supernatant to LT was 90% at $300\;{\mu}g/ml$ of LT concentration. LT concentration shown at 50% absorption ratio was $103.45{\mu}g$ and the absorption ratio was decreased with tile reduction of LT concentration. This result suggests that monoclonal antibody from 1G8-1D1 hybridoma cell bound with LT specifically. 3. The reactivities of 1G8-1D1 cell culture supernatant to LT and V. cholerae enterotoxin(CT) were 0.886 and 0.142(O.D. at 492nm) measured by the GM1-ELISA, indicating 1G8-1D1 monoclonal antibody reacted specifically with LT but not with CT. 4. The addition of 0.1ml of ascites to 0.6mg and 0.12mg of LT decreased the vascular permeability factor to 41% and 44% respectively, but it did not completely neutralize LT. 5. By double sandwich ELISA using monoclonal antibody, as little as 75ng of the purified LT per ml could be detected. 6. The results by assay of detecting LT in culture supernatants of 14 wild strains E. coli isolated from diarrhea patients by the double sandwich ELISA were almost the same level as those by reverse passive latex agglutination.

• Journal of the Korean Magnetics Society
• /
• v.7 no.5
• /
• pp.265-273
• /
• 1997

The MR ratios and the exchange biasing field and interlayer coupling field were investigated in $Ni_{91}Fe_{19}/Co_{90}Fe_{10}/Cu/Co_{90}Fe_{10}/NiO$ spin-valve sandwiches grown on antiferromagnetic NiO films as a function of the NiO thickness, the thickness of Cu and pinning layer $Co_{90}Fe_{10}$. The spin-valve sandwiches were deposited on the Corning glass 7059 by means of the 3-gun dc and 1-gun rf magnetron sputtering at a 5 mtorrpartial Ar pressure and room temperature. The deposition field was 50 Oe. The MR curve was measured by the four-terminal method with applied magnetic soft bilayer [NiFe/CoFe] (90$\AA$) decreased dramatically to less than 10 Oe when the NiFe/CoFe bilayer used an NiFe bilayer thicker that 20$\AA$. So NiFe layer improved the softmagnetic properties in the NiFe/CoFe bilayer. The GMR ratio and the magnetic field sensitivity of the spin-valve film $Ni_{91}Fe_{19}(40{\AA})/Co_{90}Fe_{10}(50{\AA}) /Cu(30{\AA})/Co_{90}Fe_{10}(35{\AA})/NiO(800{\AA})$ was 6.3% and about 0.5 (%/Oe), respectively. The MR ratio had 5.3% below an annealing temperature of 20$0^{\circ}C$ which slowly decreased to 3% above 30$0^{\circ}C$. The large blocking temperature of the spin-valve film was taken (as being) due to the good stability of the NiO films. Thus, the spin-valve films with a free NiFe/CoFe layer clearly had a high large GMR output and showed a effective magnetic field sensitivity for a suitable spin-valve head material.

• Clean Technology
• /
• v.24 no.1
• /
• pp.55-62
• /
• 2018

The adsorbent used in water-adsorption cooling system utilizing low-temperature heat of below $90^{\circ}C$ is required to exhibit high water uptake capacity at a relative humidity ($P/P_0$) between 0.1 and 0.3. Mesoporous silica (MCM-41) and MOF(MIL-101) exhibit quite large water adsorption capacity under saturated water vapor at $35^{\circ}C$. However, these adsorbents show small water adsorption capacity ($0.027{g_{water}\;g_{ads}}^{-1}$, $0.074{g_{water}\;g_{ads}}^{-1}$, respectively) in the relative humidity ($P/P_0$) range of 0.1 to 0.3. In this study, the surface properties of mesoporous silica and MOF were modified by simple methods to develop an adsorbent having a higher water uptake than the conventional water adsorbents at a relative humidity ($P/P_0$) of 0.1 ~ 0.3. In the case of mesoporous silica (MCM-41) exhibiting mainly water adsorption at $P/P_0=0.5{\sim}0.7$, aluminum species was functionalized on the mesopore walls and then cations existing near the aluminum were exchanged with various cations (e.g., $Na^+$, ${NH_4}^+$, and $(C_2H_5)_4N^+$). In addition, 20 wt% (to total weight of the composites) of hygroscopic inorganic salt ($CaCl_2$) was impregnated on the MCM-41. In the case of the MIL-101 (MOF), 20 wt% of hygroscopic inorganic salt ($CaCl_2$) was impregnated on the MIL-101. The MCM-41 which was ion-exchanged with various cations has main adsorption branch around 0.5 of $P/P_0$ which was slightly shifted with low-pressure direction in comparison with pristine MCM-41. However, tiny increases were observed on the adsorption in the range of $P/P_0$ between 0.1 and 0.3. After salt impregnation on the MCM-41, the adsorption capacity under $P/P_0=0.1{\sim}0.3$ at $35^{\circ}C$ was increased from $0.027{g_{water}\;g_{ads}}^{-1}$ to $0.152{g_{water}\;g_{ads}}^{-1}$. In the case of MIL-101, the amount of water adsorption at $35^{\circ}C$ under $P/P_0=0.1{\sim}0.3$ was increased from $0.074{g_{water}\;g_{ads}}^{-1}$ to $0.330{g_{water}\;g_{ads}}^{-1}$ after the salt impregnation.

• Journal of Acupuncture Research
• /
• v.33 no.2
• /
• pp.135-150
• /
• 2016

Objectives : The aim of this study is to review the combination effects and adverse effects of Yerba Mate (Ilex paraguariensis) on the treatment of obesity. Methods : Four databases were searched, including Pubmed, National assembly library, RISS4u, and NDSL, for studies published before March 31, 2016 using the keywords 'yerba mate', 'Ilex paraguariensis', and those related to 'obesity'. Clinical trials, and both in vivo and in vitro studies were classified according to the following categories: publication year, nationality, types and composition of test compounds, combination effects, adverse effects, and safety. Results : A total of 16 articles (14 clinical trials, one in vivo, one in vitro) were included in the analysis. Combination effects were reported from six YGD (Yerba Mate, Guarana, Damiana, Zotrim), five Meltdown, one Shred-matrix, one DBX (DymaBurn Xtreme), one XSIII research study, and adverse effects were reported from two YGD (Zotrim), four Meltdown, one Shred-matrix and one MetEF research study. YGD and Shred-matrix increased satiety while YGD and MetEF had adverse gastrointestinal effects potentially due to guarana. Meltdown and Shred-matrix increased energy expenditure and fat oxidation and had the adverse effects of increased heart rate and blood pressure due to the thermogenic effect of caffeine and yohimbine. DBX increased resting energy expenditure but no difference was observed in respiratory exchange ratio. XSIII reduced body weight gain and food intake more than each of the extracts did on their own. Conclusion : Taken together, the combination effects and adverse effects differed according to the composition of test compounds and the ratio of ingredients. Multicomponent approaches should be used for treating multifactorial diseases such as obesity. As a general conclusion, there is a place for a combination of herbal components including yerba mate, based on the principle of Kun-Shin-Choa-Sa for the treatment of obesity.

• Journal of Biomedical Engineering Research
• /
• v.24 no.2
• /
• pp.121-126
• /
• 2003

The purpose of this work was to assess and quantify whether the beneficial effects in long-term gas exchange at exciting frequency were obtained at different frequencies as well and then to develop a vibrating intravascular lung assist device(VIVLAD), for Patients suffering from acute respiratory distress syndrome(ARDS) or chronic respiratory problems. We investigate the optimal condition of the frequency band excited with new vibrator at state of limit hemolysis when blood hemolysis came to through a membrane vibration action. The experimental design and procedures were given for a device used to assess the effectiveness of membrane vibrations. Quantitative experimental measurements were performed to evaluate the performance of the device . and to identify membrane vibration dependence on blood hemolysis. We developed an analytical solution for the hydrodynamics of flow through a bundle of sinusoidally vibrated hollow fibers that is used to provide some insight into how wall vibrations might enhance the performance of the VIVLAD. In the result, it was measured that the effect of various excited frequencies in gas transfer rate and hemolysis from the maximum gas transfer rate at no vibration when the maximum gas transfer rates showed at module type 6, module type 6 consisted of 675 hollow fiber membranes The maximum oxygen transfer rate was caused by the occurrence of maximum amplitude and transfer of vibration to hollow fiber membranes when it was excited by the frequency band of 7Hz at each blood flow rate. because this frequency became the End mode resonance frequency of the flexible in blood flow. Also, when module type 6 was excited at an excited frequency of 7Hz. blood hemolysis was low. Therefore, we decided that the limit of hemolysis frequency is 7Hz . because maximum amplitude occurred at this frequency.

• Journal of Distribution Science
• /
• v.11 no.6
• /
• pp.51-58
• /
• 2013

Purpose - Nowadays, more than ever before, fierce competition, deep market segmentation, short product life cycles, and intensifying customer needs are putting increasing pressure on franchise's organizations to satisfy their customers by creating market-oriented relationships with and enhancing their market knowledge of them. One way that this might be achieved is by establishing deep ties (i.e., job commitment and job satisfaction) with their employees. Therefore, the purpose of this study is to examine how two important constructs of franchises' strategic efforts, LO (learning orientation) and RMO (relationship marketing orientation), affect job satisfaction, given the mediating role of job commitment. A franchise system comprises a set of contractual arrangements by which mutual obligations are performed. An organizational learning goal motivates employees to improve their abilities and master the tasks they perform. Relationship marketing, in addition, is to identify, establish, maintain, and enhance relationships with customers and other stakeholders to ensure that the objectives of all parties are met and this is done through the mutual exchange of promises. In a relationship marketing orientation, then, a firm creates, maintains, and enhances a strong relationship with its customers by sustaining long-term ties. This study was designed to examine the evolution of various theoretical approaches to franchise systems in order to determine whether theories about firms have significantly affected the franchise system. To this end, the authors developed a structural model consisting of several constructs. Previous studies have suggested that franchises' learning and relationship marketing orientations are important occupational immersion dimensions driving job satisfaction. Research design, data, methodology - We empirically tested a process of how the learning orientation and the relationship marketing orientation influence job commitment and job satisfaction using survey data drawn from 150 responding franchisees who were interviewed about their individual tendencies. Results - The results of this study provide empirical evidence that learning orientation, relationship marketing orientation, and job commitment all influence franchisees' job satisfaction. The results of this study indicate that, first, learning orientation had a significant effect on job satisfaction; second, relationship marketing orientation was positively related to job commitment; third, job commitment had a significant effect on job satisfaction. We also found that relationship marketing orientation and job satisfaction were mediated by job commitment. Conclusions - The findings of this study confirm the importance of learning orientation and relationship marketing orientation in maintaining a positive marketing relationship between franchiser and franchisee from to the perspective of the market. This indicates that franchiser support such as educational programs provided by the franchiser will help franchisees attain higher business management achievement and satisfaction. Moreover, a positive relationship between franchisees and consumers can be maintained through tie effects. Our findings also suggest that learning orientation plays a critical role in job satisfaction within the franchise system.

• Journal of the Korean Professional Engineers Association
• /
• v.34 no.2
• /
• pp.167-173
• /
• 2001

Through alkaline hydrothermal activation processes, Na-A type zeolite was synthesized as a single phase withfunnel-glass waste from a television tube factory. The autoclaving was performed in a closed teflon vessel in therange of 80~95"C. The silica-rich solution as a starting material was hydrothermally synthesized with quartz in INNaOH by heating 350"C under the pressure of 1,500 atm. NaA102 was made from NaOH and Al(OH)3 by heating95"c for 2~3 hours and the molar ratios of it were Na20/A1203=1.4 and H20Ha20=8. The equi-dimensional Atype zeolite (1 ~2 U) was formed by the simple mixing of'the silica-rich solution, glass waste and NaA102 for I~3hours-heating at 80"C. The characterization of the reaction product shows Na-A as a single phase. The synthesizedzeolite has cube-dodecahedral form and Ca2+ ion exchange capacity of the Na-A was in the range of 215~220mequivalent/100 g.20mequivalent/100 g.

• Korean Chemical Engineering Research
• /
• v.53 no.6
• /
• pp.818-823
• /
• 2015

In this study, FT reaction in a microchannel was simulated using computational fluid dynamics(CFD), and sensitivity analyses conducted to see effects of channel geometry variables, namely, process channel width, height, gap between process channel and cooling channel, and gap between process channels on the channel temperature profile. Microchannel reactor considered in the study is composed of five reaction channels with height and width ranging from 0.5 mm to 5.0 mm. Cooling surfaces is assumed to be in isothermal condition to account for the heat exchange between the surface and process channels. A gas mixture of $H_2$ and CO($H_2/CO$ molar ratio = 2) is used as a reactant and operating conditions are the following: GHSV(gas hourly space velocity) = $10000h^{-1}$, pressure = 20 bar, and temperature = 483 K. From the simulation study, it was confirmed that heat removal in an FT microchannel reactor is affected channel geometry variables. Of the channel geometry variables considered, channel height and width have significant effect on the channel temperature profile. However, gap between cooling surface and process channel, and gap between process channels have little effect. Maximum temperature in the reaction channel was found to be proportional to channel height, and not affected by the width over a particular channel width size. Therefore, microchannels with smaller channel height(about less than 2 mm) and bigger channel width (about more than 4 mm), can be attractive design for better heat removal and higher production.