• 한국추진공학회지
• /
• 제7권3호
• /
• pp.22-29
• /
• 2003

KSR-III 추진기관 공급계는 각종 배관류, 밸브류 및 이를 제어하는 제어기로 구성되어 있으며, 엔진으로 유입되는 추진제의 제어를 담당하고 있다. 이러한 공급계 시스템의 특성을 검증하고, 구성부품의 성능을 확인하기 위하여 PTA-I 수류시험을 실시하였다. PTA-I 시험설비는 엔진과 헬륨가압탱크를 제외한 공급계 전체와 지원설비로 이루어져 있다. PTA-I에서는 밸브, 제어기와 같은 단품에 대한 시스템 시험, 배관특성시험, 추진제 유량조절 시험, 배관부 압력 변동폭 및 주파수 특성 시험, 레귤레이터 성능 시험등을 수행하였다. PTA-I 시험을 통하여 구성단품에 대한 문제점을 발견하고 이를 수정보완 하였으며, 공급계 시스템의 설계 데이터와 시험데이터 비교를 통한 설계 검증을 완료하였다. PTA-I 시험의 결과는 PTA-II 및 연소시험을 수행하기 위한 시스템 구성에 적용하였다.

• 유공압시스템학회논문집
• /
• 제5권4호
• /
• pp.1-9
• /
• 2008

In this paper, an energy regeneration algorithm is proposed to make the maximum use of the regenerative braking energy for a parallel hybrid electric vehicle(HEV) equipped with a continuous variable transmission(CVT). The regenerative algorithm is developed by considering the battery state of charge(SOC), vehicle velocity and motor capacity. The hydraulic module consists of a reducing valve and a power unit to supply the front wheel brake pressure according to the control algorithm. In order to evaluate the performance of the regenerative braking algorithm and the hydraulic module, a hardware-in-the-loop simulation (HILS) is performed. In the HILS system, the brake system consists of four wheel brakes and the hydraulic module. Dynamic characteristics of the HEV are simulated using an HEV simulator. In the HEV simulator, each element of the HEV powertrain such as internal combustion engine, motor, battery and CVT is modelled using MATLAB/$Simulink^{(R)}$. In the HILS, a driver operates the brake pedal with his or her foot while the vehicle speed is displayed on the monitor in real time. It is found from the HILS that the regenerative braking algorithm and the hydraulic module suggested in this paper provide a satisfactory braking performance in tracking the driving schedule and maintaining the battery state of charge.

• International Journal of Automotive Technology
• /
• 제4권3호
• /
• pp.109-117
• /
• 2003

The analysis and evaluation of the transient performance by the transient response specifications under various acceleration speeds and types based on driver's typical acceleration habit are implemented by the experimental study to provide the appropriate direction for the transient control in a gasoline engine. The concept of the transient response specifications which consist of delay time, rising time, maximum overshoot and settling time, and the analysis method using them are introduced to evaluate the characteristics of the transient performance quantitatively. Furthermore four acceleration speeds and four acceleration types are set respectively to realize the various transient states which are similar to the real drive. Several performance parameters in terms of engine speed, manifold absolute pressure, fuel injection duration and air excess ratio are measured simultaneously during the various acceleration using a throttle actuator controlled by a PC. The transient response specifications characterized well the transient performance for the various acceleration speed and types quantitatively. Delay and rising time with increment of the acceleration speed became shorter, but settling time did longer. Intensified acceleration type appeared to be the most economical in view of fuel consumption, and linear acceleration type was found to have the least harmful emission concentration.

• 한국식품과학회지
• /
• 제22권4호
• /
• pp.479-485
• /
• 1990

증발 농축공정중 각종 운전 조건의 제어 및 데이터 수집을 자동으로 하기 위하여 제어 및 데이터 수집 부위에 각종 조절기와 센서를 부착하여 컴퓨터 프로그램에 의하여 공정이 진행되도록 하였다. 증발 농축 장치는 원심식 박막증발기인 Centri-Therm$(CT-1B,\;{\alpha}-Laval\;Co.,\;Sweden)$이 이용되었으며 제어 변수로는 증발기의 압력, 급액 속도, 증기의 온도 및 냉각수의 유량 등을 택했다. 그리고 데이타 수집 부위로는 급액 및 농축액의 온도와 농도, 냉각수의 입구 및 출구 온도, 증기의 온도, 증발 온도, 원료 및 농축액의 중량 변화, 응축수의 양 등을 택했다. 운전 프로그램은 PASCAL language를 이용해 작성하였으며 전 공정은 균일하게 콘트롤되었다. 냉각수는 밸브 콘트롤러에 의해 시간당 125kg의 유속으로 흐르도록 하였으며 급액 속도 125/h에서 최대 증발 속도는 41.7kg/h였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.283-290
• /
• 2007

Recently, plastic products in air-intake parts of automotive engines have become very popular due to advantages that include reduced weight, constricted cost, and lower intake air temperature. However, flow-induced noise in air-intake parts becomes a more serious problem for plastic intake-manifolds than for conventional aluminum-made manifolds. This is due to the fact that plastic manifolds transmit more noise owing to their lower material density. Internal aerodynamic noise from an Idle Speed control Actuator (ISA) is qualitatively analyzed by using a scaling law, which is expressed with some flow parameters such as pressure drop, maximum flow velocity, and turbulence kinetic energy. First, basic flow characteristics through ISA passage are identified with the flow predictions obtained by applying Computational Fluid Dynamics techniques. Then, the effects on ISA passage noise of each design factors including the duct turning shape and vane geometries are assessed. Based on these results, the preliminary low noise design for the ISA passage are proposed. The current method for the prediction of internal aerodynamic noise consists of the steady CFD and the scaling laws for the noise prediction. This combination is most cost-effective, compared with other methods, and therefore is believed to be suited for the preliminary design tool in the industrial field.

• 한국산학기술학회논문지
• /
• 제8권2호
• /
• pp.207-211
• /
• 2007

본 논문에서는 단결정$(Al_2O_3)$ 성장을 DC-Motor로 제어하여 양질의 결정을 얻도록 하는 자동 가스 조절용 DC-Motor의 운영 시스템과 실시간 모니터링 시스템을 연구 개발하였다. 인조 보석류나 예물시계의 유리와 고열 내화용 투명유리 등에 사용되는 단결정(單結晶:$Al_2O_3$) 제품은 대부분의 가열 소성제품처럼 결정 성장 중에 로(爐)내의 열 흐름에 의해 제품의 품질과 특성에 결정적인 영향을 받게 된다. 따라서 수소와 산소를 적절히 혼합하여 로(爐) 내에서 연소시킴으로 공정시간 동안 로(爐)의 온도를 최적의 상태로 유지시키는 것이 양질의 단결정$(Al_2O_3)$을 제조하는 핵심 요소가 된다. 본 연구에서 수행한 가스 조정용 전동 밸브는 기존의 수작업으로 수행하던 압력 밸브의 제어를 기기 작동 밸브의 압력을 샘플링 하여 변위 값들을 일련의 명령어로 변환한 후 컴퓨터의 제어 신호로 바꾸어 밸브를 조정하도록 함으로서 직경이 확대된 단결정의 제조를 가능하게 하였다.

• 한국소음진동공학회논문집
• /
• 제17권8호
• /
• pp.683-692
• /
• 2007

Recently, plastic products in air-intake parts of automotive engines have become very popular due to advantages that include reduced weight, constricted cost, and lower intake air temperature. However, flow-induced noise in air-intake parts becomes a more serious problem for plastic intake-manifolds than for conventional aluminum-made manifolds. This is due to the fact that plastic manifolds transmit more noise owing to their lower material density. Internal aerodynamic noise from an idle speed control actuator(ISA) is qualitatively analyzed by using a scaling law, which is expressed with some flow parameters such as pressure drop, maximum flow velocity, and turbulence kinetic energy. First, basic flow characteristics through ISA passage are identified with the flow predictions obtained by applying computational fluid dynamics techniques. Then, the effects on ISA passage noise of each design factors including the duct turning shape and vane geometries are assessed. Based on these results, the preliminary low noise design for the ISA passage are proposed. The current method for the prediction of internal aerodynamic noise consists of the steady CFD and the scaling laws for the noise prediction. This combination is most cost-effective, compared with other methods, and therefore is believed to be suited for the preliminary design tool in the industrial field.

• 한국항공우주학회지
• /
• 제39권1호
• /
• pp.84-89
• /
• 2011

소형인공위성의 우주추진체로 사용될 홀방식 전기추력기의 서브시스템으로 제논연료공급장치가 개발되었다. 제논연료공급장치는 연료저장탱크에서 추력기의 양극과 음극에 낮은 압력으로 연료를 공급하게 된다. 추력기는 양극과 음극에서 독립적으로 정밀한 연료의 유량제어를 요구하고 있다. 연료의 유량은 양극과 음극에 각각 위치한 오리피스와 차단밸브를 통해 축압탱크의 압력을 변경함으로서 조절된다. 본 논문은 제논연료공급장치의 부품선정을 포함한 설계와 성능검증 및 기능시험에 대한 내용을 다루고 있다.

• 대한기계학회논문집A
• /
• 제40권6호
• /
• pp.581-585
• /
• 2016

최근 고령화 사회에 진입과 소득수준이 향상됨에 따라 의료 수요가 빠르게 증가되고 있다. 이중 신약 개발은 의료분야의 핵심 분야 중 하나로 전 세계적으로 많은 투자가 연구가 이루어지고 있다. 신약 개발의 중요한 과제 중 하나는 다양한 후보를 빠르고 정확하게 발굴하는 자동화 시스템을 개발하는 것이다. 고속으로 후보물질을 발굴하는 기술 중 대표적 기술이 세포 기반 고집적 스크리닝 시스템(High Contents Screening, 이하 HCS) 기술이다. 이 HCS 시스템에서 다양한 물질을 한꺼번에 스크리닝하기 위해서는 다기능 고정밀 디스팬서 제작이 필수적이다. 본 연구에서는 기존의 HCS 디스팬서 시스템이 가지고 있는 단점을 보완하기 위해 에어건과 압력 구동식 펌프를 이용한 새로운 컨셉의 비접촉식 디스팬서를 개발하고 그 가능성을 확인한다.

• Journal of Chest Surgery
• /
• 제21권4호
• /
• pp.649-655
• /
• 1988

One hundred and one patients with tetralogy of Fallot who were older than 16 years of age underwent a total correction of the anomaly between May, 1964 and July, 1987. This group comprised 14.9% of the 679 consecutive patients who had repair of the tetralogy at our institution during the same period. Of the 101 patients, 8 had a previous shunt procedure for palliation. The preoperative mean hemoglobin value was 16.9*1.0% and the mean systemic oxygen saturation, 84.4*0.9%. In 76 patients[75.2%], a type II ventricular septal defect was seen whereas in 14 patients[13.9%], the defect was type I. In 72 patients[71.3%], other cardiac anomalies were present which included patent foramen ovale in 37.6%, atrial septal defect in 8.99b, vegetations in 6.9%, right sided aortic arch in 5.9% and coronary artery anomaly in 5.0%. The right ventricular outflow obstruction was caused most commonly by combination of infundibular and valvular stenosis[74.3%], followed by isolated infundibular stenosis[19.8%] and valvular stenosis [5.9%] alone in order. The preoperative mean diameter of the pulmonary valve ring size was 10.2*0.5 mm in diameter. A transannular patch enlargement of the right ventricular outflow tract was performed in 28 patients and, in 12 a pericardial monocusp was utilized. Major anomalous aorto-pulmonary vessels were encountered in 5 patients which were detected before or during the operation. In 3 patients, they were ligated beforehand to control the flooding of the operative field. Postoperatively, the mean systolic pressure gradient between the right ventricle and the main pulmonary artery was 16.2*2.3 mmHg and the mean systolic pressure- ratio between the right and the left ventricle was 45.3*2.0%. Perioperative complications including bleeding in 8.9%, pleural effusion in 7.9%, dysrrhythmia in 4.9%, and residual VSD in 4.0%. Operative mortality was 8.9%. There has been no operative death in the recent 65 cases since 1981. There were 2 late deaths, 68 and 113 months after surgery. There were 2 late detachment of the VSD patch during the follow-up period. Of the 6 patients with patch detachment found during the postoperative period, 3 had subacute bacterial endocarditis before or after the operation indicating The serious nature of this complication. Two of these patients subsequently underwent a successful reoperation.