• Journal of the Korean GEO-environmental Society
• /
• v.7 no.5
• /
• pp.5-11
• /
• 2006

A primary factor affecting on the design of soft ground is to determine the soil properties (Compression index, Coefficient of consolidation) and the depth of soft ground. It could be the basic sources to estimate settlement behavior of soft ground. Even though the reliable soil examination equipment was used to examine soil to determine the depth of soft ground, it's very hard to find out the accurate properties of soft ground, because the condition of indoor experiment cannot reproduce the circumstances of ground perfectly. Therefore, this study was re-estimated to find out the most reliable soil properties by using back-analysis with field monitoring data of "Site preparation for Airplane Mooring of Incheon International Airport Phase II Development" for 317days.

• Fashion & Textile Research Journal
• /
• v.18 no.5
• /
• pp.658-667
• /
• 2016

The purpose of this study is 1) to research how practitioners in fashion industry in South Korea perceive concepts of Technical Design/Designer, 2) to compare and analyze issues at work by occupation, 3) to research specific works in garment development process, and 4) to compare and analyze work involvement by occupation, type of a company and etc, and 5) to propose the role of Technical Designers in apparel companies in South Korea. There were two methods to conduct this study, which were in-depth interview and survey. Both methods were conducted to designers, merchandisers, pattern makers, technical designers, and production coordinators. Frequency analysis, ANOVA, Duncan test, and Factor analysis were performed to get results by using SPSS 18.0 program. The results are following. There were 50 works during garment development process from the result of in-depth interview, and 6 factors were obtained from the result of Factor analysis, which were 'Works about Sample in Sample Development Process', 'Works about Product's Pattern and Size Spec', 'Works about Development of Garment's Design', 'Works about Planning of Product Development and Management of Product in Stock', 'Works about Production Process', and 'Preparation Works for Sample Development'. In conclusion, technical designer in apparel companies in South Korea should be in charge of works about sample in sample development process and decision making of product' size spec, which is included in works about product's pattern and size spec. Also, they should complete technical package after product is developed by designers.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.2
• /
• pp.1151-1154
• /
• 2013

Background: Changes in dietary practices are known to be associated with changes in the health and disease pattern of a population. This study aimed to qualitatively explore the perception of colorectal cancer patients regarding causes of colorectal cancer and the influence of diet. Materials and Methods: Twelve respondents from three major ethnicities in Malaysia were selected from the quantitative study on dietary pattern and colorectal cancer carried out earlier in this study. In-depth interviews (IDI), conducted from April until June 2012, were mainly in the Malay language with additional use of English and continued until the saturation point was reached. All interviews were autorecorded so that verbatim transcriptions could be created. Results: Causes of colorectal cancer were categorized into internal and external factors. The majority of respondents agreed that there is an association between Western foods and colorectal cancer. Malaysian traditional diet was not related to colorectal cancer as less preservative agents were used. Malaysian diet preparation consisting of taste of cooking (spicy, salty and sour foods) plus type of cooking (fry, grilled and smoked) were considered causes of colorectal cancer. All respondents changed their dietary pattern to healthy food after being diagnosed with colorectal cancer. Advice from doctors regarding suitable food for colorectal cancer was useful in this regard. Conclusions: Eating outside, use of food flavoring ingredients and preservative agents were considered to be the main factors causing colorectal cancer. All respondents admitted that they changed to a healthy diet after being diagnosed with colorectal cancer.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.27 no.2
• /
• pp.126-131
• /
• 2017

In this paper, we propose a method to extract meaningful motion among various kinds of hand gestures on giving commands to robots using hand gestures. On giving a command to the robot, the hand gestures of people can be divided into a preparation one, a main one, and a finishing one. The main motion is a meaningful one for transmitting a command to the robot in this process, and the other operation is a meaningless auxiliary operation to do the main motion. Therefore, it is necessary to extract only the main motion from the continuous hand gestures. In addition, people can move their hands unconsciously. These actions must also be judged by the robot with meaningless ones. In this study, we extract human skeleton data from a depth image obtained by using a Kinect v2 sensor and extract location data of hands data from them. By using the Kalman filter, we track the location of the hand and distinguish whether hand motion is meaningful or meaningless to recognize the hand gesture by using the hidden markov model.

• Transactions of the Korean hydrogen and new energy society
• /
• v.23 no.4
• /
• pp.310-315
• /
• 2012

A simple drying process was developed for the preparation of a Pt/Nafion self-humidifying membrane to be used for a proton-exchange membrane fuel cell (PEMFC). Platinum (II) bis (acetylacetonate), $Pt(acac)_2$ was sublimed, penetrated into the surface of a Nafion film and then reduced to Pt nanoparticles simultaneously without any support of a reducing agent in a glass reactor at $180^{\circ}C$ for 15 min. The process was carried out in $N_2$ atmosphere to prevent the oxidation of Pt nanoparticles at high temperature. The morphology and distribution of the Pt nanoparticles were observed by transmission electron microscopy (TEM) and energy dispersive spectroscopy (EDS), and we found that the average Pt particle size was ca. 3.7 nm, the penetration depth was ca. $17{\mu}m$. Almost all Pt nanoparticles were formed just beneath the surface and the number density decreased rapidly as the penetration depth increased. To estimate water absorption characteristics of the Nafion membranes, water uptake at an isothermal condition was measured by dynamic vapor sorption (DVS), and it was found that water uptake of the Pt/Nafion membrane was higher than that of the neat Nafion membrane.

• Analytical Science and Technology
• /
• v.16 no.3
• /
• pp.232-239
• /
• 2003

The river sediments were collected from 4 points of Seoknam river, one point of Miho river and one point of the joining area of two rivers. For preparation of sample, three sediment samples were collected for the surface, middle and lower part of the sediment at each sampling point. The elemental concentrations were analyzed by neutron activation analysis using HANARO research reactor at Korea Atomic Energy Research Institute, and the concentrations of 30 elements were determined by the relative method using standard reference material of NIST. As a result of analysis, it was found that when the examination and prediction of contamination distribution about the site where the contamination site of river is connected to the lower river is done, the specific gravity of elements which is contained in the sediment and the speed of a current of river should be considered and also found that when the samples for concentration analysis in the river sediments are collected, for the establishment of regional representatives in samples, the range of sampling depth should be determined considering the specific gravity of elements and the speed of a current.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.4
• /
• pp.177-183
• /
• 2015

Incremental sheet metal forming is a manufacturing process to produce thin parts using sheet metals by a series of small incremental deformation. The process rarely needs dedicated dies and molds, thus, preparation time for the process is relatively short as to be compared to conventional metal forming. Spring back in sheet metal working is very common, which causes critical errors in dimensions. Incremental sheet metal forming is not fully investigated yet. Hence, incremental sheet metal forming frequently produces inaccurate parts. This paper proposes a method to minimize dimensional errors to improve shape accuracy of products manufactured by incremental forming. This study conducts experiments using an exclusive incremental forming machine and the material for these experiments are sheets of aluminum AL1015. This research defines a process parameter and selects a few factors for the experiments. The parameters employed in this paper are tool feed rate, tool diameter, step depth, material thickness, forming method, dies applied, and tool path method. In addition, their levels for each factor are determined. The plan of the experiments is designed using orthogonal array $L_8$ ($2^7$) which requires minimum number of experiments. Based on the measurements, dimensional errors are collected both on the tool contacted surfaces and on the non-contacted surfaces. The distances between the formed surfaces and the CAD models are scanned and recorded using a commercial software product. These collected data are statistically analyzed and ANOVAs (analysis of variances) are drawn up. From the ANOVAs, this paper concludes that the process parameters of tool diameter, forming depth, and forming method are the significant factors to reduce the errors on the tool contacted surface. On the other hand, the experimental factors of forming method and dies applied are the significant factors on the non-contacted surface. However, the negative forming method always produces better accuracy than the positive forming method.

• Restorative Dentistry and Endodontics
• /
• v.46 no.3
• /
• pp.33.1-33.12
• /
• 2021

Objectives: This study aimed to investigate the efficacy of ionic and non-ionic-based contrast media (in vitro study) and the combinatorial effect of chitosan-based endo-radiopaque solution (CERS) (in vivo study) for visualization of the root canal anatomy. Materials and Methods: In vitro study (120 teeth): The root canal of maxillary premolars and molars (in vitro group 1 and 2 respectively, n = 60 each) were analyzed using 4 different contrast media (subgroups: Omnipaque 350, Iopamidol, Xenetix 350, and Urografin 76; n = 15 each) in combination with 5.25% sodium hypochlorite (NaOCl). Based on the results of the in vitro study, in vivo study (80 teeth) was done to compare Xenetix 350 + 5.25% NaOCl with CERS (in vivo group 1 and 2 respectively, n = 40 each) on maxillary and mandibular premolars and molars. Two endodontists used radiovisiography to assess the depth of ingress and identify the aberrant root anatomy after access cavity preparation, and after initial cleaning and shaping of canals. Kruskal-Wallis test was used for in vitro comparison (p < 0.05), and Wilcoxon signed-rank test and Mann-Whitney U test for in vivo analysis (p < 0.01). Results: In vitro study, Xenetix 350 + 5.25% NaOCl facilitated a significant higher visualization (p < 0.05). For in vivo study, CERS had a statistically significant depth of ingress (p < 0.01), and was efficient in identifying the aberrant root canal anatomy of premolars and molars. Conclusions: CERS facilitates better visualization of the root canal anatomy of human premolars and molars.

• Journal of Industrial Convergence
• /
• v.22 no.7
• /
• pp.69-79
• /
• 2024

The purpose of this study was to explore the meaning on awareness of sexual minorities among nursing college students in graduation year. The participants were eight students attending three nursing colleges in Provinces C and K. Data were collected from November 2023 to January 2024. through in-depth interview until data saturation. The collected data were analyzed by applying Colaizzi's phenomenological research method. In this study, four categories and eight theme clusters were generated. The four categories consisted of 'Ambivalence towards sexual minorities', 'Empathy for the sexual minorities' difficult situation', 'Fear of caring for sexual minorities', and 'Preparation for the future as a nurse'. These results will contribute to the qualitative improvement of nursing education by providing the grounds for the effective educational strategy development which improve nursing students' awareness and care of sexual minorities. In-depth studies on various factors affecting awareness of sexual minorities in nursing students and problems are required.

• Journal of East-West Nursing Research
• /
• v.26 no.2
• /
• pp.109-117
• /
• 2020

Purpose: We aimed to develop domains for the resilience improvement of unmarried mothers to prevent child abuse based on a nursing model of resilience. Methods: We conducted a literature review and in-depth interviews with unmarried mothers. Results: Based on Polk's nursing model of resilience, we derived 4 patterns, 10 domains, and 24 sub-domains for improving the resilience of unmarried mothers. Philosophical pattern includes the domain of parenthood preparation and dispositional pattern includes the domains of emotional support, control of emotions, and child abuse awareness correction. Situational pattern includes the domains of maternal health promotion, understanding of child development and improvement of parenting skills, and assessment of the domestic environment and modification of risk factors. Relational pattern includes the domains of enhancement of mother-infant attachment, family support, and social support. Conclusion: We identified domains for enhancing resilience based on the situational and personal characteristics of unmarried mothers. The results of this study may contribute to child abuse precention by promoting the resilience of unmarried mothers.