• 환경영향평가
• /
• 제3권2호
• /
• pp.77-84
• /
• 1994

The study is to analyze the contents of Environmental Impact Statement(EIS) and supplementary EIS prepared from 1981 to 1992. The contents are project area, project cost, EIS volume, project term, assessment term, EIS preparation cost, land use plan, and kinds of predictive model concerning air quality, water quality, noise and vibration etc. by project type. Data are collected with EIS analysis checklist and analyzed by $SPSS/PC^+$.

• 한국수학교육학회지시리즈E:수학교육논문집
• /
• 제21권2호
• /
• pp.271-282
• /
• 2007

Producing tools for actively meeting social needs in a radical changing society due to the development of modern technology has been shifted from physical ability to intelligent ability. The prominence of educating creativity is perceived as a good preparation in order to deal with them. Considered that assessment which is systematic activity to collect, analyze, diagnose, and judge information of a series of instruction practices is means to impart evidence and feedback of teaching learning practices, education and assessment is placed on reciprocal relationship. Nevertheless, there has been some tendency of neglect of assessment, comparing education for upbringing creativity. In this paper model of pencil and paper problem is discussed focusing on the sub-components of creativity and problem solving as one of the variety of means to extend mathematical creativity.

• 한국환경과학회지
• /
• 제29권10호
• /
• pp.981-988
• /
• 2020

This study presents meteorological data integrity to improve environmental quality assessment in Yongdam catchment. The study examines both extreme ranges of meteorological data measurements and data reliability which include maximum and minimum temperature, relative humidity, dew point temperature, radiation, heat flux. There were some outliers and missing data from the measurements. In addition, the latent heat flux and sensible heat flux data were not reasonable and evapotranspiration data did not match at some points. The accuracy and consistency of data stored in a database for the study were secured from the data integrity. Users need to take caution when using meteorological data from the Yongdam catchment in the preparation of water resources planning, environmental impact assessment, and natural hazards analysis.

• BMB Reports
• /
• 제33권6호
• /
• pp.537-540
• /
• 2000

A simplified but reliable method was developed for the polymerase chain reaction (PCR)-based detection of genetically modified (GM) plants. The modified CTAB (mCTAB) method enabled us to prepare a high quality of genomic DNA from several hundred plant leaf samples in one day. Using DNA samples prepared from seven dicots and two monocots, approximately 1.75-kb regions spanning 17 S to 25 S ribosomal RNA genes were successfully amplified in a 2X PCR pre-mix containing BLOTTO. Further fidelity assessment of the mCTAB method by PCR analysis with Roundup Ready soybean (RRS) and non-RRS plants showed that the DNA samples prepared alternately from each of two lines were evidently free of cross-contamination. These results demonstrate that the mCTAB method is highly recommended for the rapid detection of transgenes in large numbers of leaf samples from diverse transgenic plants.

• 한국자기공명학회논문지
• /
• 제24권1호
• /
• pp.30-37
• /
• 2020

Quantitative nuclear magnetic resonance (qNMR) has been gaining attention as a purity assessment method. In particular, qNMR is recognized as the primary method to realize the Internal System of Units (SI) in organic analysis. The capability of quantitative analysis is recognized as the beginning of NMR development. NMR signals are proportional to the number of nuclei and qNMR has been used in various fields, such as metabolomics and food and pharmaceutical analysis. However, careful sample preparation and thorough optimization of measurement parameters are required to obtain accurate and reliable results. In this review, quantitative methods used in qNMR are discussed, and the important factors to be considered also introduced. The recent development of qNMR techniques including combination with chromatography and, multidimensional NMR are also presented.

• 환경영향평가
• /
• 제6권2호
• /
• pp.181-188
• /
• 1997

Vegetation is an important factor in EIA(Environmental Impact Assessment) and it is assessed according to DGN(Degree of Green Naturality) in EIS(Environmental Impact Statement) preparation. But DGN has room for improvement of assessing vegetation Status. This study introduced NDVI(Normalized Difference Vegetation Index) for improving status assessment method that subjects to DGN. For the application of NDVI, Landsat TM data of Chunchon on May 2, 1989 and June 1, 1994, and data of Ulsan on November 5, 1984, November 2, 1992 and May 9, 1994 were used. It compared NDVI with DGN according to season and location. The correlation coefficient value for the spring image (1994, 0.7, p=0.01) was proved to be higher than that of autumn (1984, 0.5, p=0.01).

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2006년도 추계학술발표회
• /
• pp.283-289
• /
• 2006

이 연구에서는 국제적으로 관심이 집중되고 있는 FSA를 선박의 화재 안전 분야에 도입하기 위한 준비과정으로 화재안전도의 가장 중요한 지표인 사망확률의 근거가 되는 피난계산을 실습선의 모의훈련에 의해 계산하여 피난시간의 계산 및 성능기준 화재의 안전설계를 검토하였다. 그 결과 승선인원과 대피 통로의 폭과는 일정한 상관관계가 있으며 최적의 폭을 산정할 수 있음을 보였다. 그러나 선박 내부의 좁은 통로와 선박의 종류에 따른 특수한 구조를 고려할 때 일괄적인 적용은 어렵다. 또한 대피시간을 모의실험에 의해 추정하고 유출계수를 구한 결과 공용실의 유출계수와 비교하여 기관실의 인명위험성이 약 4배이상 높게 나타났다.

• Nuclear Engineering and Technology
• /
• 제42권1호
• /
• pp.1-8
• /
• 2010

Geological disposal is designed to provide safe containment of radioactive waste for very long times, with the containment provided by a combination of engineered and geological barriers. In the extreme long term, after many thousands of years or longer, residual amounts of long-lived radionulides such as Cl-36, but also radionuclides in the natural decay chains, may be released into the environment normally accessed and used by humans, termed here, the biosphere. It is necessary to ensure that any such releases meet radiation protection objectives through the development of a safety case, which will include assessment of radiation doses to humans. The design of such dose calculations over such long timeframes is not straightforward, because of the range of potentially relevant assumptions which could be made, concerning environmental change and changes in human behavior. These conceptual uncertainties are additional to those that more typically arise, for example, in the assessment of present day situations, but which also have to be addressed. The issue has therefore been subject to international cooperation for many years. This paper summarizes the evolution and results of that collaboration leading up to the present day, taking account of developments in international recommendations on radiation protection objectives and the more recent greater focus on preparation of site specific safety cases.

• 한국환경과학회지
• /
• 제19권6호
• /
• pp.715-735
• /
• 2010

This study is designed to assess the priority order of the chemicals to cause to generate occupational diseases in order to understand the fundamental data required for the preparation of health protective measure for the workers dealing with chemicals. The 41 types of 51 ones of chemicals to cause to generate the national occupational diseases were selected as the study objects by understanding their domestic use or not, and their occupational diseases' occurrence or not among 110,608 types of domestic and overseas chemicals. To assess their priority order the sum of scores was acquired by understanding the actually classified condition based on a perfect score of physical riskiness(90points) and health toxicity(92points) as a classification standard by GHS, the priority order on GHS riskiness assessment, GHS toxicity assessment, GHS toxic xriskiness assessment(sum of riskiness plus toxicity) was assessed by multiplying each result by each weight of occupational disease's occurrence. The high ranking 5 items of chemicals for GHS riskiness assessment were turned out to be urethane, copper, chlorine, manganese, and thiomersal by order. Besides as a result of GHS toxicity assessment the top fives were assessed to be aluminum, iron oxide, manganese, copper, and cadium(Metal) by order. On the other hand, GHS toxicity riskiness assessment showed that the top fives were assessed to be copper, urethane, iron oxide, chlorine and phenanthrene by order. As there is no material or many uncertain details for physical riskiness or health toxicity by GHS classification though such materials caused to generate the national occupational diseases, it is very urgent to prepare its countermeasure based on the forementioned in order to protect the workers handling or being exposed to chemicals from health.

• 품질경영학회지
• /
• 제51권2호
• /
• pp.155-170
• /
• 2023

Purpose: Nowadays, the risk assessment system is widely used in many industrial and public areas to reduce the possible risks. The system is used to determine the priorities of the government quality assurance works in Defense Agency for Technology and Quality. However, as the risk assessment system is used for other purposes, there are some items that need improvement, and in this study, we propose improvement plans by benchmarking the risk assessment systems of other institutions. Methods: In this paper, first, the procedures of risk assessment system used in many industrial sites were reviewed, and how each institution specialized and applied the system. Afterwards, by benchmarking various risk assessment systems, an improvement plan on how to operate the risk assessment system in the case of government quality assurance for centrally procured military supplies was presented, and practical application cases were presented to prove the usefulness of the improvement plan. Results: The proposed risk assessment system differs from the existing system in five major aspects. First, inputs, outputs, and key performance indicators were specified from the systematic point of view. Second, risk analysis was analyzed in four dimensions: probability of occurrence, impact, detection difficulty. Third, risk mitigation measures were classified, control, transfer, and sharing. Fourth, the risk mitigation measures were realized through document verification, product verification, process verification, and quality system evaluation. Finally, risk mitigation measures were implemented and the effectiveness of the risk mitigation measures was evaluated through effectiveness evaluation. Conclusions: In order for the risk assessment procedure proposed in this study to be applied to actual work, it is necessary to obtain the consent of the person involved in the work due to the increased time for risk identification and preparation of the government quality assurance log, and a change in the information system that performs the actual work is required. Therefore, the authors of this study plan to actively perform internal seminar presentations and work improvement suggestions to apply these research outputs to actual work.